Creating and Modifying Profiles [ Configuring and Managing Host-Based X.25 Links ] MPE/iX 5.0 Documentation
Configuring and Managing Host-Based X.25 Links
Creating and Modifying Profiles
The DTS Profile Selection screenfor host-based management (see Figure 4-1
) lists the profiles available in your configuration file. (To reach
this screen, press the [Go to Profiles] key at the Host Configuration
screen or the Card Configuration screen.) From this Profile Selection
screen, you may review, add, delete, or modify profiles.
Click here to view figure.
Figure 4-1. DTS Profile Selection Screen
1. To review, add, delete, rename, or modify a profile, go to the
Profile Selection screen.
2. Enter the profile name in the Profile name field.
3. If you are deleting a profile, press the [Delete Profile] key.
You must press the key again to confirm the deletion. You are
done. Exit this screen by pressing the [Prior Screen] key.
4. If you are renaming a profile, enter the new profile name in the
New name field and press [Rename Profile]. You are done. Exit
this screen by pressing the [Prior Screen] key.
5. If you are adding a profile, enter the profile type in the Type
field. Valid profile types are: terminal, printer, padterm,
padprint. Press the [Add Profile] key. Proceed to Step 7 below.
6. If you are modifying or reviewing a profile, press the [Modify
Profile] key. Proceed to the next step below.
7. The appropriate profile screen will be displayed, showing the
settings of the specified profile.
Examples of Terminal Profile screen, Printer Profile screen, PAD
Terminal Profile screen, and PAD Printer Profile screen are shown
on the next few pages.
8. Review the profile settings. Use the [Tab] key to move around the
fields in the screen. Make changes as needed by typing over the
current values.
9. If you want to save the changes, press the [Save Data] key.
10. To return to the Profile Selection screen, press the [Prior
Screen] key.
11. To exit the Profile Selection screen, press the [Prior Screen] key
again.
Fields
Profile name The name of the profile to be reviewed,
added, modified, deleted, or renamed.
Type Required only if adding a new profile.
Specifies whether the profile is to be a
terminal, printer, PAD terminal, or PAD
printer profile. UPSs use a terminal type
of profile.
New name The new name for the profile. Required only
when renaming a profile.
Defined DTS Profiles Display only. Lists the name and type of
existing profiles. If more than 15 profiles
exist, they are listed on additional pages
of this screen. Use the [Next Page] key to
move forward on the pages and the [Prev
Page] key to move back on the pages of the
screen.
MPE/iX 5.0 Documentation
HP 3000 Manuals