Configure IP parametersThe HP Secure Web Console was factory pre-configured with a default IP address which you used to access these Web pages. You must configure the HP Secure Web Console with an IP address that is unique in your network. You must have obtained an IP address and subnet mask from your network administrator before configuring the IP parameters. Secure Web Console name: Enter up to 64 alphanumerical characters. This name must be unique in your network. IP gateway: Enter the IP address of the gateway (router) if you want to configure one. This field is optional. System name: Enter the name of the system to which the HP Secure Web Console is connected. This name will be displayed on each browser window when you are logged on the HP Secure Web Console. Terminal Type: Select the default terminal type of the Console. Only Administrator can change the selection.
|
|