Configuring datacom parameters

You can configure the following port parameters on the HP Secure Web Console:

Baud rate: Configure this value to the same value as is configured on the system to which the HP Secure Web Console is connected.

Parity/Data bits: Configure this value to the same value as is configured on the system to which the HP Secure Web Console is connected.

Parity checking: If required, this parameter can be different from that configured on the system to which the HP Secure Web Console is connected.

Recvpace/Xmitpace: Configure this value to the same value as is configured on the system to which the HP Secure Web Console is connected.

Return to guided tour