Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
 HP e3000 MPE/iX System Software Maintenance Manual (Release C.70.00): HP e3000 MPE/iX Computer Systems > Chapter 2 Task Checklists

Checklist K. Install a New System
» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

 » Glossary

 » Index

spacerspacerspacer
spacer
spacer
  		 
 

Use this task checklist if your source material is on tape and you are using a CSLT tape to:

WARNING! Performing the activities in this task DESTROYS ALL FILES THAT EXIST on your system. Do not perform a new installation on an existing system.
NOTE:

  • Perform a new installation when new hardware has been shipped to you and the operating system software is not already installed. This is performed only once in the lifetime of a computer. Your system software is shipped to you on tape media.

  • You cannot apply Reactive patches at the same time you are updating the system. You must apply Reactive patches after you install the system. To apply Reactive patches (after you install the system), refer to Checklist A, "Manage Patches," or Checklist B, "Manage Patches by Staging Area."

Print a copy of this checklist for each new system that you are installing.

Begin Preparation Tasks. Does not require exclusive access to the system.

Read and perform the steps only in the following sections:

Preparation Tasks completed. Schedule downtime for exclusive access.

Begin Exclusive Access Tasks.

  • Chapter 5 “Modifying Your System”

    • 5.2 Applying the SLT

    • 5.3 Listing the System Configuration

      Record configuration Group name:

    • 5.4 Starting the System

    • 5.5 Configuring the System

    • 5.6 Checking Volumes

    • 5.7 Creating the CSLT using AUTOINST—Select option 3 FOS, SUBSYS, PowerPatch if you have a PowerPatch tape, or if no PowerPatch, select option 4 FOS and SUBSYS.

    • 5.13 Applying the CSLT Modification

    • 5.14 Restarting the System

    • 5.15 Rerunning AUTOINST—Required only if applying PowerPatch.

  • Chapter 6 “Finishing the Process”

    • 6.1 Configuring Datacomm and UPS

    • 6.4 Setting Passwords, Lockwords, and UDCs

    • 6.5 Configuring Manually Installed Products

    • 6.6 Setting Up the TAR Utility

    • 6.7 Performing the Final Reboot

    • 6.8 Restarting Selected System Functions

    • 6.9 Backing Up Your System

    • 6.11 Finishing Up

Checklist K tasks completed.

If you have Reactive patches to apply, proceed to one of these checklists:

  • Checklist A, "Manage Patches"

  • Checklist B, "Manage Patches by Staging Area"

Record system change:

  • System name:

  • System type:

  • Date change made:

  • Change performed by:

  • OS version from:

  • OS version to:

  • Comments:



Checklist J. Reinstall Using a CSLT
  		 


Checklist L. Using AUTOINST to Apply PowerPatch Only  
Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© Hewlett-Packard Development Company, L.P.