3.5 Checking Peripherals

Proceed to the subsection for your device:

CD-ROM Disk Drive
SCSI Tape Devices

Then review the following subsections:

LDEV1 Disk Minimum Capacity
LDEV1 Disk Maximum Capacity

CD-ROM Disk Drive

To update or add-on to your system software using a CD-ROM, you must have a CD-ROM drive installed and configured. Refer to Appendix E “CD-ROM Resources” :

If you have a compatible CD-ROM disk drive, proceed to the subsection, "LDEV 1 Disk Minimum Capacity."

LDEV 1 Disk Minimum Capacity

After MPE/iX Release 6.5, you will be unable to use CIO or fiberlink drives anywhere on the system. It is recommended that you disconnect all unsupported devices before updating.

PCI I/O HP e3000s LDEV 1 must be 2GB or larger.

PCI I/O HP e3000: N-Class, A-Class

To identify your LDEV 1 device, use the DSTAT ALL command to determine the logical device numbers of configured devices.

From either the terminal or console for each system:
:DSTAT ALL
If the device configured as your LDEV 1 is supported, proceed with "LDEV 1 Disk Maximum Usage."

LDEV 1 Disk Maximum Usage

If you are using a disk drive with over 4 GBytes capacity as LDEV 1, any disk space over the 4 GBytes is not available for use. It cannot and will not be used for system or user files.

See Table 3-4 “NIO Systems” for a list of NIO systems.

Table 3-4 NIO Systems

NIO Systems
Series 9x8LX, 9x8RX, 9x9KS, 99x

Checking Peripherals completed. Go to the next section on your checklist.

3.5 Checking Peripherals

Technical documentation

» Table of Contents

» Glossary

» Index

CD-ROM Disk Drive

LDEV 1 Disk Minimum Capacity

LDEV 1 Disk Maximum Usage