 |
» |
|
|
|
A- ABORTJOB
command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX
- account
- recommended
passwords;password
- recommended accounts and
users, 6.4 Setting Passwords, Lockwords, and UDCs
- accounting structure
- create, 5.7 Creating the CSLT Using AUTOINST, 5.16 Rerunning HPINSTAL, 5.17 Rerunning HP Patch/iX
- rebuild, 4.5 Backing Up Your System for Reinstall
- activate
- staging
area, HP Stage/iX Concepts, 5.10 Setting a Staging Area
- UDC, 6.4 Setting Passwords, Lockwords, and UDCs
- add-on
- checklist, Selecting Checklists
- Add-on
with CD-ROM checklist;checklist
- Add-on with
CD-ROM, Checklist F. Add-on with CD-ROM, Checklist H. Update with CD-ROM
- Add-on
with Tape and Manage Patches checklist;checklist
- Add-on
with Tape and Manage Patches, Checklist E. Add-on with Tape and Manage Patches, Checklist F. Add-on with CD-ROM
- Add-on
with Tape checklist;checklist
- Add-on with Tape, Checklist D. Add-on with Tape
- Adding (SUBSYS)
Products
- Main menu, Preparing Your System With HP Patch/iX
- option, Overview
- Adding a PowerPatch
option, Overview
- Adding a Reactive
Patch option, Overview
- ALLBASE/4GL
- secure
the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- ALLBASE/SQL
- secure
the system, 5.11 Securing the System
- alternate
boot path, 5.2 Applying the SLT, 5.13 Applying the CSLT Modification
- ALTGROUP
command, 4.3 Preparing to Run HPINSTAL, 5.7 Creating the CSLT Using AUTOINST
- apply CSLT, 5.13 Applying the CSLT Modification
- AUTOBOOT, 5.4 Starting the System, 5.5 Configuring the System, 5.13 Applying the CSLT Modification, 6.7 Performing the Final Reboot
- AUTOINST, 5.7 Creating the CSLT Using AUTOINST
- apply
PowerPatch files, 5.15 Rerunning AUTOINST
- file
set, 5.11 Securing the System
- options, 5.7 Creating the CSLT Using AUTOINST
- RECOVERY parameter, 5.15 Rerunning AUTOINST
- tool
definition, Tool Options
- AutoRestart/iX
- secure
the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- available
patches;patch
- available, Overview
- AVRSCSI
- MOUNT command, 4.3 Preparing to Run HPINSTAL
- AXLDEV1, 4.1 Reserving Disk Space for Tape Tasks
- AXLSPACE, 4.1 Reserving Disk Space for Tape Tasks, 4.12 Reserving Disk Space for CD-ROM Tasks
B- backup
- re-install, 4.5 Backing Up Your System for Reinstall
- secure
the system, 5.1 Securing and Backing Up the System for Tape Tasks
- system, 6.9 Backing Up Your System
- system;system
- backup;full
system backup, 5.11 Securing the System
- base
- group
HPINSTAL, 4.6 Creating the CSLT using HPINSTAL
- location, HP Stage/iX Concepts
- boot
the system
- alternate boot path, 5.13 Applying the CSLT Modification
- alternate path, 5.2 Applying the SLT
- primary boot path, 6.7 Performing the Final Reboot
- primary path, 5.2 Applying the SLT, 5.5 Configuring the System, 5.14 Restarting the System
- BUILD command, 4.1 Reserving Disk Space for Tape Tasks, 4.12 Reserving Disk Space for CD-ROM Tasks
- BULDACCT, 4.5 Backing Up Your System for Reinstall, 6.2 Restoring User Files
- BULDJOB1 file, 6.2 Restoring User Files
- BULDJOB1
file;BULDJOB2 file, 4.5 Backing Up Your System for Reinstall
- BULDJOB2 file, 6.2 Restoring User Files
C- capabilities
- system
manager for staging area, 5.10 Setting a Staging Area
- capacity
- LDEV
1, LDEV 1 Disk Minimum Capacity
- CD-ROM
- drive, CD-ROM Disk Drive
- loading
disk, 4.3 Preparing to Run HPINSTAL
- product
list, 4.6 Creating the CSLT using HPINSTAL
- SCSI, 4.3 Preparing to Run HPINSTAL
- secure
the system, 5.11 Securing the System
- certificate
- keyword, 4.6 Creating the CSLT using HPINSTAL
- checklist
- using, Task Checklists
- CHECKSLT
- RESTORE
command, Contiguous Disk Space Requirements
- CLKUTIL command, 5.2 Applying the SLT
- command
- ABORTJOB, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX
- ALTGROUP, 4.3 Preparing to Run HPINSTAL, 5.7 Creating the CSLT Using AUTOINST
- AVRSCSI, 4.3 Preparing to Run HPINSTAL
- CLKUTIL, 5.2 Applying the SLT
- COMMIT, 6.10 Permanently Applying a Staging Area
- DSTAT, 4.3 Preparing to Run HPINSTAL, 5.6 Checking Volumes
- HPINSTAL, 4.6 Creating the CSLT using HPINSTAL
- INSTALL, 5.2 Applying the SLT, 5.13 Applying the CSLT Modification
- LIMIT, 5.1 Securing and Backing Up the System for Tape Tasks, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area, 5.14 Restarting the System
- MAPPER, 5.3 Listing the System Configuration
- MKNOD, 6.6 Setting Up the TAR Utility
- MOUNT, 4.3 Preparing to Run HPINSTAL
- NETCONTROL, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX, 6.8 Restarting Selected System Functions
- NEWGROUP, 4.3 Preparing to Run HPINSTAL
- NEWVOL, 5.6 Checking Volumes, 5.14 Restarting the System
- NMMGR, Converting Datacomm
- NSCONTROL, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX
- ODE, 5.3 Listing the System Configuration
- OPENQ, 5.14 Restarting the System, 5.17 Rerunning HP Patch/iX
- PURGE, 4.1 Reserving Disk Space for Tape Tasks, 4.12 Reserving Disk Space for CD-ROM Tasks
- PURGEGROUP, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 6.8 Restarting Selected System Functions
- RDCC, Converting Datacomm
- RENAME, 6.4 Setting Passwords, Lockwords, and UDCs
- REPORT, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- RESTORE, Installing HP Patch/iX
- RESTORE
PowerPatch, 4.3 Preparing to Run HPINSTAL
- SCRATCHVOL, 5.6 Checking Volumes, 5.14 Restarting the System
- SET STAGE, 5.10 Setting a Staging Area
- SETCATALOG, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- SETINIT, 4.3 Preparing to Run HPINSTAL
- SETUP, 4.3 Preparing to Run HPINSTAL
- SHOWDBE, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- SHOWJOB, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX
- SHOWLOGSTATUS, 5.11 Securing the System
- SHUTDOWN, 5.2 Applying the SLT, 5.5 Configuring the System, 5.12 Shutting Down the Remote System, 5.13 Applying the CSLT Modification
- SLTCOPY, 4.6 Creating the CSLT using HPINSTAL
- SPOOLER, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area
- STAGEMAN, 4.4 Initializing HP Stage/iX, 5.10 Setting a Staging Area, 6.3 Recovering Staging Areas, 6.10 Permanently Applying a Staging Area
- START, 5.4 Starting the System, 5.5 Configuring the System, 6.7 Performing the Final Reboot
- STARTDBE, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- STORE, 5.11 Securing the System
- backup, 4.5 Backing Up Your System for Reinstall, 5.11 Securing the System
- STREAM, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area, 5.14 Restarting the System, 5.17 Rerunning HP Patch/iX
- SYSFILE, 6.4 Setting Passwords, Lockwords, and UDCs
- SYSGEN, 5.5 Configuring the System, 5.11 Securing the System, Converting Datacomm, 6.4 Setting Passwords, Lockwords, and UDCs, 6.9 Backing Up Your System
- UPDATE, 5.13 Applying the CSLT Modification
- VSOPEN/VSCLOSE, 4.3 Preparing to Run HPINSTAL
- COMMIT command, HP Stage/iX Concepts, 6.10 Permanently Applying a Staging Area
- configuration
- default
I/O, 5.3 Listing the System Configuration
- files, 5.5 Configuring the System, 6.1 Configuring Datacomm and UPS
- hardware, 5.3 Listing the System Configuration
- information, 3.2 General Planning Tasks
- save
changes, 5.5 Configuring the System
- system, 5.5 Configuring the System
- system
group, 5.4 Starting the System
- configuration
file
- conversion, Converting Datacomm
- cross validate, Converting Datacomm
- restore, 5.5 Configuring the System
- configure
- data
communication, 6.1 Configuring Datacomm and UPS
- devices, 5.5 Configuring the System
- network
interfaces, 6.8 Restarting Selected System Functions
- system
volume, 5.14 Restarting the System
- console
- factory
SLT, 5.2 Applying the SLT
- logon, 4.2 Reserving Disk Space for Distributing Staging Areas, 4.5 Backing Up Your System for Reinstall, 5.6 Checking Volumes, 5.7 Creating the CSLT Using AUTOINST, 5.11 Securing the System
- contiguous disk space, 3.6 Estimating Disk Space, Contiguous Disk Space Requirements, 4.1 Reserving Disk Space for Tape Tasks
- conversion
- disk
space to megabytes, Converting Between Disk Sectors and MBytes
- NMMGRVER, Converting Datacomm
- create
- accounting
structure, 5.7 Creating the CSLT Using AUTOINST
- CSLT
with AUTOINST, 5.7 Creating the CSLT Using AUTOINST
- Stage
Tape menu option, Selecting Patching Task
- CSLT
- add
customized files, 4.6 Creating the CSLT using HPINSTAL
- apply, 5.13 Applying the CSLT Modification
- base
group file, 4.6 Creating the CSLT using HPINSTAL
- mount, 5.13 Applying the CSLT Modification
- PowerPatch
for remote system, 4.6 Creating the CSLT using HPINSTAL
- re-install
checklist;Re-Install Using a CSLT checklist; checklist
- Re-Install
Using a CSLT checklist, Checklist J. Reinstall Using a CSLT
- update, 5.13 Applying the CSLT Modification
- CSLT
creating
- for
patches, Qualifying Patches Steps, Overview
- for remote system, 4.6 Creating the CSLT using HPINSTAL
- with AUTOINST, 5.7 Creating the CSLT Using AUTOINST
- with
HPINSTAL, 4.6 Creating the CSLT using HPINSTAL
- with
Patch/iX, Overview
- cstm
user interface, Two Interfaces
- menus and commands, cstm Menus and Commands
- system map, System Map in cstm
- customize
- file
added to CSLT, 4.6 Creating the CSLT using HPINSTAL
- patch
preparation, Preparing Your System With HP Patch/iX
D- DADCONF file, Converting Datacomm
- data communication
- configure, 6.1 Configuring Datacomm and UPS
- configuring, 6.1 Configuring Datacomm and UPS
- convert files, Converting Datacomm
- start, 6.8 Restarting Selected System Functions
- date
- confirming
start up, 5.2 Applying the SLT
- start
up, 5.4 Starting the System, 5.13 Applying the CSLT Modification, 5.14 Restarting the System
- system, 6.7 Performing the Final Reboot
- DBEnvironment
- secure
the system, 5.11 Securing the System
- DDS
tape
- restoring
with HPINSTAL, 5.16 Rerunning HPINSTAL
- secure the system, 5.11 Securing the System
- deactivate
UDC, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- Detail Summary screen, Viewing Patches (optional)
- device class, 4.6 Creating the CSLT using HPINSTAL, 5.7 Creating the CSLT Using AUTOINST
- device icons, System Map and Device Icons
- diagnose
tool (STM), Kinds of Support Tools
- diagnostic
tool
- MAPPER, 5.3 Listing the System Configuration
- directory structure
- rebuild, 6.2 Restoring User Files
- disable
- UDC, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- disk
- drive
requirements, LDEV 1 Disk Minimum Capacity
- limitations, LDEV 1 Disk Minimum Capacity
- system
domain, 5.6 Checking Volumes
- disk space
- contiguous, Contiguous Disk Space Requirements
- conversion, Converting Between Disk Sectors and MBytes
- default, Disk Space Error Messages
- error
message, Disk Space Error Messages
- estimating, 3.6 Estimating Disk Space
- net, Non-Contiguous Disk Space Requirements
- non-contiguous, 3.6 Estimating Disk Space, Disk Space Estimate for Updating
- reserving, 4.1 Reserving Disk Space for Tape Tasks, 4.2 Reserving Disk Space for Distributing Staging Areas
- Distributing
Staging Areas to Remote Systems checklist;checklist
- Distributing
Staging Areas to Remote Systems, Checklist C. Distributing Staging Areas to Remote Systems
- downtime planning, 3.2 General Planning Tasks
- drive
- CD-ROM, CD-ROM Disk Drive
- drive
status
- DSTAT command, 4.3 Preparing to Run HPINSTAL
- LONER, 4.3 Preparing to Run HPINSTAL
- MASTER-RO, 4.3 Preparing to Run HPINSTAL
- DSTAT
command, LDEV 1 Disk Minimum Capacity, 4.3 Preparing to Run HPINSTAL, 5.6 Checking Volumes, 5.14 Restarting the System
- DTC, 6.1 Configuring Datacomm and UPS, Converting Datacomm
- adding
link, Converting Datacomm
- power
cycle, 6.8 Restarting Selected System Functions
F- Factory System
Load Tape (SLT), Source Material Components, 5.2 Applying the SLT, 5.3 Listing the System Configuration
- failure log, Getting Result Information (Logs)
- FASTSIZE value, 5.2 Applying the SLT, 5.13 Applying the CSLT Modification
- files
- converting
data comm configuration files, 6.1 Configuring Datacomm and UPS
- firmware
update tool (STM), Kinds of Support Tools
- force
- patches, Overview
- Force
function key, Qualifying Patches Steps
- FOS, Source Material Components
- AUTOINST option, 5.7 Creating the CSLT Using AUTOINST
- restore
files, 5.7 Creating the CSLT Using AUTOINST
- function key
- Next
Filter, Viewing Patches (optional)
- Process, Preparing Your System With HP Patch/iX
H- hardware
- device
configuration, 5.5 Configuring the System
- peripherals, 5.3 Listing the System Configuration
- HICAT000 file, 4.3 Preparing to Run HPINSTAL
- HP
files customized;customize
- HP files, 3.2 General Planning Tasks
- HP Patch/iX
- complete messages, 5.17 Rerunning HP Patch/iX
- tool
definition, Tool Options
- HP-IB device
adapter, Removal of Support for Servers and HP-IB in MPE/iX
- HPINSTAL
- base group, 4.6 Creating the CSLT using HPINSTAL
- command, 4.6 Creating the CSLT using HPINSTAL
- complete
messages, 5.16 Rerunning HPINSTAL
- file, 4.3 Preparing to Run HPINSTAL
- options, 4.6 Creating the CSLT using HPINSTAL
- RECOVERY parameter, 5.16 Rerunning HPINSTAL
- rerunning, 5.16 Rerunning HPINSTAL
- tool
definition, Tool Options
- HPINSTFL
- file, 5.11 Securing the System
- purging, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
I- I/O
- configuration, 5.3 Listing the System Configuration
- inconsistencies
- resolving, Converting Datacomm
- INDIRLST
- file, 4.3 Preparing to Run HPINSTAL
- information
tool (STM), Kinds of Support Tools
- initialization
messages, 5.2 Applying the SLT, 5.4 Starting the System, 5.13 Applying the CSLT Modification, 6.7 Performing the Final Reboot
- initialize
- Stage/iX, Overview
- install
- checklist, Selecting Checklists
- checklist;checklist
- Install
a New System;Install a New System checklist ;new system checklist, Checklist K. Install a New System
- factory
SLT, 5.2 Applying the SLT
- Patch/iX, Installing HP Patch/iX
- resume
with AUTOINST, 5.15 Rerunning AUTOINST
- resume
with HPINSTAL, 5.16 Rerunning HPINSTAL
- INSTALL command, 5.2 Applying the SLT, 5.13 Applying the CSLT Modification
- INSTALL.SYS group, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- installation files
- processing, 5.16 Rerunning HPINSTAL, 5.17 Rerunning HP Patch/iX
- zero, 5.7 Creating the CSLT Using AUTOINST, 5.15 Rerunning AUTOINST
- installation jobs
- complete, 5.15 Rerunning AUTOINST
- stream, 5.7 Creating the CSLT Using AUTOINST
- INSTUTIL
- group, 4.3 Preparing to Run HPINSTAL
- IODFAULT, 5.5 Configuring the System
- IPL, 5.2 Applying the SLT, 5.5 Configuring the System, 5.13 Applying the CSLT Modification, 5.14 Restarting the System
- ISL, 6.7 Performing the Final Reboot
- prompt, 5.2 Applying the SLT
- ISQL, 5.1 Securing and Backing Up the System for Tape Tasks
- secure
the system, 5.11 Securing the System
L- LAN console card, Converting Datacomm
- LDEV
- hard
disk requirements, LDEV 1 Disk Minimum Capacity
- PowerPatch
tape, Preparing Your System With HP Patch/iX, Creating Patch or Stage Tape Steps
- Reactive
tape, Preparing Your System With HP Patch/iX
- SUBSYS
tape, Preparing Your System With HP Patch/iX, Creating Patch or Stage Tape Steps
- LDEV 1
- capacity, LDEV 1 Disk Minimum Capacity
- disk
space, 4.1 Reserving Disk Space for Tape Tasks, 4.2 Reserving Disk Space for Distributing Staging Areas
- limitations, LDEV 1 Disk Minimum Capacity
- libraries
- copying, Preparing Your System With HP Patch/iX
- modify, Creating Patch or Stage Tape Steps
- LIMIT command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area, 5.14 Restarting the System
- limitations
- LDEV1
disk, LDEV 1 Disk Minimum Capacity
- local
system, 4.3 Preparing to Run HPINSTAL
- lockword
- reapply, 6.4 Setting Passwords, Lockwords, and UDCs
- set, 6.4 Setting Passwords, Lockwords, and UDCs
- log
off
- users, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX
- log
on
- Patch/iX, Starting HP Patch/iX
- logging
processes
- record
names, 5.11 Securing the System
- secure the system, 5.11 Securing the System
- terminate, 5.11 Securing the System
- logid, 5.11 Securing the System
- LONER status, 4.3 Preparing to Run HPINSTAL, 5.6 Checking Volumes, 5.14 Restarting the System
- LP device
- configure
class, 5.5 Configuring the System
M- Main
menu
- Adding (SUBSYS) Products, Preparing Your System With HP Patch/iX
- Patch/iX, Starting HP Patch/iX
- Select
Activities option, Overview
- Stage/iX
initialized, Overview
- manage patch, Overview
- MANAGER.SYS
- disable
UDC, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- password, 6.4 Setting Passwords, Lockwords, and UDCs
- manually
installed products, 6.5 Configuring and Updating Manually Installed Products
- secure the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- MAPPER
- command, 5.3 Listing the System Configuration
- Mark function key, Preparing Your System With HP Patch/iX
- MASTER
- status, 5.6 Checking Volumes, 5.14 Restarting the System
- master product
- keyword, 4.6 Creating the CSLT using HPINSTAL
- list, 4.6 Creating the CSLT using HPINSTAL
- list subset, 4.6 Creating the CSLT using HPINSTAL
- MASTER-RO status, 4.3 Preparing to Run HPINSTAL
- media
- options, Media Requirements
- requirements, Source Material Components
- source, 3.2 General Planning Tasks
- MEMBER
status, 5.14 Restarting the System
- messages
- initialization
and restore, 6.7 Performing the Final Reboot
- startup
and initialization, 5.2 Applying the SLT, 5.4 Starting the System
- MGR.HPOFFICE
- secure
the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- MKNOD command, 6.6 Setting Up the TAR Utility
- MOUNT command, 4.3 Preparing to Run HPINSTAL
- MPEXL_SYSTEM_VOLUME_SET, 5.6 Checking Volumes
- mstm
user interface, Two Interfaces
- menus and commands, mstm Menus and Commands
- shortcut keys, mstm Shortcut Keys
- system map, System Map in mstm
N- net
disk space, Non-Contiguous Disk Space Requirements
- NETCONTROL command, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX, 6.8 Restarting Selected System Functions
- NetWare, 3.2 General Planning Tasks
- network
- addresses, Converting Datacomm
- configuration, Converting Datacomm
- names
for interfaces, 6.8 Restarting Selected System Functions
- planning, 3.2 General Planning Tasks
- router, 6.8 Restarting Selected System Functions
- NEWGROUP
command, 4.3 Preparing to Run HPINSTAL
- NEWVOL
command, 5.6 Checking Volumes, 5.14 Restarting the System
- Next Filter
function key, Viewing Patches (optional)
- NIO system LDEV 1
usage, LDEV 1 Disk Maximum Usage
- NMCONFIG
- configuration
changes, 5.5 Configuring the System
- file, 6.1 Configuring Datacomm and UPS
- file
recovery, Converting Datacomm
- NMMGR
- utility, 6.1 Configuring Datacomm and UPS
- NMMGRVER
- utility, Converting Datacomm
- non-contiguous
disk space, 4.1 Reserving Disk Space for Tape Tasks, 4.2 Reserving Disk Space for Distributing Staging Areas
- non-contiguous
disk space;permanent amount of non-contiguous disk space, 3.6 Estimating Disk Space
- NOSYSSTART option, 5.4 Starting the System, 5.14 Restarting the System
- NS3000/iX
- secure
the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- stream
JCONFJOB, Converting Datacomm
- NSCONTROL command, 6.8 Restarting Selected System Functions
O- ODBCLink/SE
installation, ODBCLink Installation
- ODE
- command, 5.3 Listing the System Configuration
- online
tools, Support Tools Manager (STM) for MPE/iX
- getting result information, Getting Result Information (Logs)
- logs, Getting Result Information (Logs)
- tool
types, Kinds of Support Tools
- OP user level, 6.4 Setting Passwords, Lockwords, and UDCs
- operating
system
- version level requirements, Operating System Version Requirements
P- password
- set, 6.4 Setting Passwords, Lockwords, and UDCs
- patch
- create
CSLT, Qualifying Patches Steps
- create
stage area, Qualifying Patches Steps, Overview
- create
STORE tape, Qualifying Patches Steps, Overview
- default
preparation, Preparing Your System With HP Patch/iX
- dependent, Qualifying Patches Steps
- force, Overview
- installation
tape, Overview
- manage, Overview
- modify
approved list, Qualifying Patches Steps
- preparation
customized, Preparing Your System With HP Patch/iX
- qualify, Overview
- qualify
with AUTOINST, 5.7 Creating the CSLT Using AUTOINST
- selecting
for installation, Overview
- stage
compatible, Qualifying Patches Steps
- veto, Overview
- view
detail, Viewing Patches (optional)
- Patch/iX
- apply
patches, 5.17 Rerunning HP Patch/iX
- components, HP Patch/iX
- install, Installing HP Patch/iX
- introduction, HP Patch/iX
- log
on, Starting HP Patch/iX
- Main
menu, Starting HP Patch/iX
- start, Starting HP Patch/iX
- PATCHXL group, Preparing Your System With HP Patch/iX
- peak
disk space;maximum amount of non-contiguous disk space, 3.6 Estimating Disk Space
- peripherals
- hardware, 5.3 Listing the System Configuration
- plan
- general, 3.2 General Planning Tasks
- task, Planning for Your Task
- PM (Privilege
Mode) user level, 6.4 Setting Passwords, Lockwords, and UDCs
- power cycle
- DTCs, 6.8 Restarting Selected System Functions
- power failure protection, Converting Datacomm
- PowerPatch, Source Material Components
- AUTOINST option, 5.7 Creating the CSLT Using AUTOINST
- information
file restoring, Preparing Your System With HP Patch/iX
- Patch/iX, Overview
- Patch/iX
tape request, Creating Patch or Stage Tape Steps
- restore, 4.6 Creating the CSLT using HPINSTAL, 5.7 Creating the CSLT Using AUTOINST, 5.11 Securing the System
- restore
files, Creating Patch or Stage Tape Steps
- restore
with AUTOINST, 5.7 Creating the CSLT Using AUTOINST
- PowerTrust, Converting Datacomm
- pre-4.0
OS version, 3.2 General Planning Tasks
- Predictive
Support
- secure the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 6.8 Restarting Selected System Functions
- primary
boot path, 5.2 Applying the SLT, 5.5 Configuring the System, 5.14 Restarting the System, 6.7 Performing the Final Reboot
- print_device, 4.1 Reserving Disk Space for Tape Tasks, 4.2 Reserving Disk Space for Distributing Staging Areas, 4.3 Preparing to Run HPINSTAL, 4.5 Backing Up Your System for Reinstall, 5.6 Checking Volumes, 5.7 Creating the CSLT Using AUTOINST, 5.8 Preparing a Staging Area for Remote Distribution, 5.10 Setting a Staging Area, 5.11 Securing the System, 5.12 Shutting Down the Remote System, 5.14 Restarting the System, 5.17 Rerunning HP Patch/iX
- Process function key, Preparing Your System With HP Patch/iX
- process
installation files, 5.16 Rerunning HPINSTAL, 5.17 Rerunning HP Patch/iX
- PRODLIST, 4.3 Preparing to Run HPINSTAL
- product
- numbers, 4.6 Creating the CSLT using HPINSTAL
- references, 4.3 Preparing to Run HPINSTAL
- remote
system, 4.6 Creating the CSLT using HPINSTAL
- product
(SUBSYS) information file
- restore, Preparing Your System With HP Patch/iX
- product list, 4.6 Creating the CSLT using HPINSTAL
- progress messages, 5.15 Rerunning AUTOINST
- PSDCFILE, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 6.8 Restarting Selected System Functions
- PSIDNLD
- secure
the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- purge
- AXLSPACE, 4.1 Reserving Disk Space for Tape Tasks
- HPINSTFL, 5.11 Securing the System
- INSTALL.SYS
files, Preparing Your System With HP Patch/iX
- patch
and installation files, Preparing Your System With HP Patch/iX
- PATCHXL
files, Preparing Your System With HP Patch/iX
- USL.SYS,
UXL.SYS, and UNL.SYS files, Preparing Your System With HP Patch/iX
- PURGE
command, 4.12 Reserving Disk Space for CD-ROM Tasks
- PURGEGROUP
command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 6.8 Restarting Selected System Functions
R- RDCC command, Converting Datacomm
- re-install
- backup, 4.5 Backing Up Your System for Reinstall
- checklist, Selecting Checklists, Checklist J. Reinstall Using a CSLT
- reactive
patch, Overview
- checklists, Selecting Checklists
- tape
restore, Preparing Your System With HP Patch/iX
- task
definition, Source Material Components
- reboot
- staging
area, 6.10 Permanently Applying a Staging Area
- rebuild
- accounting
structure, 4.5 Backing Up Your System for Reinstall
- directory
structure, 6.2 Restoring User Files
- RECOVERY
parameter, 5.15 Rerunning AUTOINST, 5.16 Rerunning HPINSTAL
- remote
- update
checklist;Modify Remote System checklist; checklist
- Modify
Remote System checklist, Checklist I. Modify Remote System
- remote system
- add
files, 4.3 Preparing to Run HPINSTAL
- create
CSLT, 4.6 Creating the CSLT using HPINSTAL
- product
list, 4.6 Creating the CSLT using HPINSTAL
- secure the system, 5.11 Securing the System
- SLTCOPY
command, 4.6 Creating the CSLT using HPINSTAL
- rename
- rules, 3.2 General Planning Tasks
- RENAME command, 6.4 Setting Passwords, Lockwords, and UDCs
- REPORT command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- required
materials, 3.1 Verifying Required Materials
- rerun Patch/iX, 5.17 Rerunning HP Patch/iX
- reset
- system, 5.5 Configuring the System, 5.12 Shutting Down the Remote System, 5.13 Applying the CSLT Modification, 6.7 Performing the Final Reboot
- UDCs, 6.2 Restoring User Files
- restart
system, 6.7 Performing the Final Reboot
- restore
- configuration
files, 5.5 Configuring the System
- FOS, 5.7 Creating the CSLT Using AUTOINST
- messages, 5.13 Applying the CSLT Modification
- NMCONFIG
file, Converting Datacomm
- patch
and product information, Preparing Your System With HP Patch/iX
- Patch/iX, Installing HP Patch/iX
- PowerPatch, 4.6 Creating the CSLT using HPINSTAL, 5.7 Creating the CSLT Using AUTOINST
- PowerPatch
files, Creating Patch or Stage Tape Steps
- PowerPatch
information file, Preparing Your System With HP Patch/iX
- product
(SUBSYS) information file, Preparing Your System With HP Patch/iX
- reactive
patch tape, Preparing Your System With HP Patch/iX
- SUBSYS, 5.7 Creating the CSLT Using AUTOINST
- user
files, 6.2 Restoring User Files
- RESTORE
command, 4.3 Preparing to Run HPINSTAL
- resume
installation
- AUTOINST, 5.15 Rerunning AUTOINST
- HPINSTAL, 5.16 Rerunning HPINSTAL
- router network interface, 6.8 Restarting Selected System Functions
- RSPROG command, 3.2 General Planning Tasks
S- SCRATCHVOL command, 5.6 Checking Volumes, 5.14 Restarting the System
- SCSI
- CD-ROM, 4.3 Preparing to Run HPINSTAL
- tape
device, SCSI Tape Devices
- secure the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- security
- account, 6.4 Setting Passwords, Lockwords, and UDCs
- BULDJOB
files, 6.2 Restoring User Files
- Select Activities
- option, Overview
- sessions
- abort, 5.1 Securing and Backing Up the System for Tape Tasks
- secure
the system, 5.11 Securing the System
- set
- lockwords, 6.4 Setting Passwords, Lockwords, and UDCs
- passwords, 6.4 Setting Passwords, Lockwords, and UDCs
- SET command, 5.10 Setting a Staging Area
- SETCATALOG command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System, 6.4 Setting Passwords, Lockwords, and UDCs
- SETINIT command, 4.3 Preparing to Run HPINSTAL
- SETUP
- command, 4.3 Preparing to Run HPINSTAL
- SETVAR
command, Starting HP Patch/iX
- SHOWDBE command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- SHOWJOB command, 5.11 Securing the System, 5.17 Rerunning HP Patch/iX
- SHOWLOGSTATUS command, 5.11 Securing the System
- shutdown
- planning, 3.2 General Planning Tasks
- SHUTDOWN command, 5.5 Configuring the System, 5.12 Shutting Down the Remote System
- SLT, 5.3 Listing the System Configuration
- SLTCOPY
- command, 4.6 Creating the CSLT using HPINSTAL
- special
accounts
- customized;accounts
- HP
defined;password, 3.2 General Planning Tasks
- spool files
- secure
the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- SPOOLER command, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area
- SPUINFOP
file, 5.14 Restarting the System, 6.7 Performing the Final Reboot
- SQLUTIL, 5.1 Securing and Backing Up the System for Tape Tasks
- secure
the system, 5.11 Securing the System
- stage
- compatible
patches, Qualifying Patches Steps
- patch
checklist, Checklist A. Manage Patches, Checklist B. Manage Patches by Staging Area, Checklist C. Distributing Staging Areas to Remote Systems
- Stage/iX
- apply
staging area, 6.10 Permanently Applying a Staging Area
- concepts, HP Stage/iX Concepts
- initialized, Overview
- introduction, HP Stage/iX
- Patch/iX
Main menu, Starting HP Patch/iX
- selecting
option, Creating Patch or Stage Tape Steps
- task
overview, HP Stage/iX Task Overview
- tool
definition, Tool Options
- stage_name, 5.10 Setting a Staging Area
- STAGEMAN
command, 4.4 Initializing HP Stage/iX, 6.10 Permanently Applying a Staging Area
- staging area, HP Stage/iX Concepts
- activate, 5.10 Setting a Staging Area
- contents, 5.10 Setting a Staging Area
- create, Overview, Overview
- create
for patches, Qualifying Patches Steps, Overview
- name, Creating Patch or Stage Tape Steps
- permanent, 6.10 Permanently Applying a Staging Area
- reboot, 6.10 Permanently Applying a Staging Area
- staging group
- secure
the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- start
- data
communications, 6.8 Restarting Selected System Functions
- Patch/iX, Starting HP Patch/iX
- system, 5.4 Starting the System
- START command, 5.4 Starting the System, 5.5 Configuring the System, 5.14 Restarting the System, 6.7 Performing the Final Reboot
- START PME
- create, Creating Patch or Stage Tape Steps
- start
the system, 5.5 Configuring the System, 5.14 Restarting the System
- STARTDBE
command, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- startup messages, 5.2 Applying the SLT, 5.4 Starting the System
- STORE
- create
tape for patches, Overview
- files
for backup, 4.5 Backing Up Your System for Reinstall
- NMCONFIG
file, Converting Datacomm
- STORE command, 4.5 Backing Up Your System for Reinstall, 5.11 Securing the System
- store
tape
- create for patches, Qualifying Patches Steps, Overview
- stream
- installation
jobs, 5.7 Creating the CSLT Using AUTOINST, 5.15 Rerunning AUTOINST
- STREAM command, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area
- streams_device, 4.1 Reserving Disk Space for Tape Tasks, 4.2 Reserving Disk Space for Distributing Staging Areas, 4.3 Preparing to Run HPINSTAL, 4.5 Backing Up Your System for Reinstall, 5.6 Checking Volumes, 5.7 Creating the CSLT Using AUTOINST, 5.8 Preparing a Staging Area for Remote Distribution, 5.9 Installing a Distributed Staging Area, 5.10 Setting a Staging Area, 5.11 Securing the System, 5.12 Shutting Down the Remote System, 5.14 Restarting the System, 5.17 Rerunning HP Patch/iX
- configure, 5.5 Configuring the System
- SUBSYS, Source Material Components
- add, 4.6 Creating the CSLT using HPINSTAL
- AUTOINST option, 5.7 Creating the CSLT Using AUTOINST
- Patch/iX, Overview
- PowerPatch
add, 4.6 Creating the CSLT using HPINSTAL
- restore, 5.7 Creating the CSLT Using AUTOINST
- SUPACCT, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- Support Line, System Software Media Requirements
- Support Tools
Manager (STM), Support Tools Manager (STM) for MPE/iX
- blank icon, A device in the STM map is "Unknown" (MPE/iX)
- common problems, Common Problems
- device icons, System Map and Device Icons
- device-select class command
problem, The "Device — >Select Class" command did not work.
- distributed structure, Distributed Structure
- failed SCSI commands, SCSI Tape and Disk Tools report SCSI commands as failed in the Test Activity Logs.
- failure log, Getting Result Information (Logs)
- gettting result information, Getting Result Information (Logs)
- logs, Getting Result Information (Logs)
- menus and commands, Menus and Commands
- no tools available, No tools are available for a particular device.
- online help, Getting Help
- remote execution, Remote Execution
- running, Running STM (Summary)
- slow response, Slow response to user commands.
- starting, Running STM (Summary)
- system map, System Map and Device Icons
- test activity log, Getting Result Information (Logs)
- tool types, Kinds of Support Tools
- Unit Under Test (UUT) machine, Remote Execution
- unknown device, A device in the STM map is "Unknown" (MPE/iX)
- User Interface (UI) machine, Remote Execution
- user interfaces, Two Interfaces
- SYSDIAG
- utility, 6.8 Restarting Selected System Functions
- SYSFILE command, 6.4 Setting Passwords, Lockwords, and UDCs
- SYSGEN, 5.5 Configuring the System, 5.11 Securing the System, Converting Datacomm, 6.4 Setting Passwords, Lockwords, and UDCs, 6.9 Backing Up Your System
- system
- backup, 6.9 Backing Up Your System
- clock, 5.2 Applying the SLT
- domain, 5.6 Checking Volumes
- libraries, 4.6 Creating the CSLT using HPINSTAL
- libraries
copying, Preparing Your System With HP Patch/iX, 5.7 Creating the CSLT Using AUTOINST
- lockwords, 6.4 Setting Passwords, Lockwords, and UDCs
- reboot, 6.7 Performing the Final Reboot
- reset, 5.5 Configuring the System, 5.12 Shutting Down the Remote System, 5.13 Applying the CSLT Modification
- restart, 6.7 Performing the Final Reboot
- security, 6.2 Restoring User Files
- shutdown, 5.5 Configuring the System, 5.12 Shutting Down the Remote System, 5.13 Applying the CSLT Modification
- start
up, 5.4 Starting the System, 5.5 Configuring the System, 5.14 Restarting the System
- volumes, 5.6 Checking Volumes
- system
file
- identify, 6.4 Setting Passwords, Lockwords, and UDCs
- System
Manager
- activate stage area, 5.10 Setting a Staging Area
- system map, System Map and Device Icons
- system volume
- configure, 5.14 Restarting the System
T- tape media
- checklist, Selecting Checklists
- TAR
utility, 6.6 Setting Up the TAR Utility
- terminal
- Patch/iX, Starting HP Patch/iX
- VSCLOSE/VSOPEN
command, 4.3 Preparing to Run HPINSTAL
- test
activity log, Getting Result Information (Logs)
- third-party
software
- compatibility, 3.2 General Planning Tasks
- time
- confirming
start up, 5.2 Applying the SLT
- start
up, 5.4 Starting the System, 5.13 Applying the CSLT Modification, 5.14 Restarting the System
- system, 6.7 Performing the Final Reboot
U- UDC
- activate, 6.4 Setting Passwords, Lockwords, and UDCs
- deactivate, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- disable, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- filenames, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- reset, 6.2 Restoring User Files
- secure
the system, 5.1 Securing and Backing Up the System for Tape Tasks, 5.11 Securing the System
- Unit Under
Test (UUT) machine, Remote Execution
- UPDATE
- command, 5.13 Applying the CSLT Modification
- update
- CD-ROM, 4.6 Creating the CSLT using HPINSTAL
- disk
space requirements, 3.6 Estimating Disk Space
- factory
SLT, 5.2 Applying the SLT
- remote
system, 4.6 Creating the CSLT using HPINSTAL
- tool
options, Disk Space Error Messages
- Update
with CD-ROM checklist;checklist
- Update with
CD-ROM, Checklist H. Update with CD-ROM, Checklist I. Modify Remote System
- UPS
- devices, Converting Datacomm
- Monitor/iX;uninterruptible
power supply, Converting Datacomm
- user
- logging, 5.11 Securing the System
- set
passwords, 6.4 Setting Passwords, Lockwords, and UDCs
- user files
- restore, 6.2 Restoring User Files
- restoring, 6.2 Restoring User Files
- User
Interface (UI) machine, Remote Execution
- utilities
(STM), Kinds of Support Tools
V- v.uu.ff
- record
level, 4.3 Preparing to Run HPINSTAL
- validate
- configuration, Converting Datacomm
- verify
tool (STM), Kinds of Support Tools
- veto
- function
key, Qualifying Patches Steps
- patches, Overview
- view
- available
patches, Overview
- available
products;product
- available;available products, Overview
- Installed
Patches;installed patches;patch
- installed, Overview
- patch
detail, Viewing Patches (optional)
- View
Patches
- option, Overview
- screen, Viewing Patches (optional)
- VOLUTIL, 5.6 Checking Volumes
- VSCLOSE
command, 4.3 Preparing to Run HPINSTAL
- VSOPEN
command, 4.3 Preparing to Run HPINSTAL
|
Printable version
