United States-English

HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00): HP e3000 MPE/iX Computer Systems > Chapter 2 Task Checklists

Checklist F. Add-on with CD-ROM

»

Technical documentation


	Complete book in PDF


»	Feedback

» Table of Contents

» Glossary

» Index

Use this task checklist if your source material is on CD-ROM and you are using CSLT tape to:

Add-on purchased products
Add-on purchased products and apply PowerPatch patches




	NOTE: You cannot apply Reactive patches at the same time you are using CD-ROM source material to add-on purchased products to your system. You must apply Reactive patches after you update the system. To apply Reactive patches (after you update the system), refer to the Checklist A, "Manage Patches," or Checklist B, "Manage Patches by Staging Area."

Print a copy of this checklist for each system that you are applying add-on products to.

Read and perform the steps only in the following sections:

Begin Preparation Tasks.Does not require exclusive access to the system.

Chapter 3 “Planning for Your Task”
- 3.1 Verifying Required Materials
- 3.2 General Planning Tasks
- 3.3 CD-ROM Planning Tasks
- 3.4 Checking Tape Media
- 3.6 Estimating Disk Space
  Record contiguous disk space:
  Record non-contiguous disk space:
Chapter 4 “Preparing Your System”
- 4.3 Preparing to Run HPINSTAL
  Record CD v.uu.ff version level:
- 4.6 Creating the CSLT using HPINSTAL
  Record manually installed products:
- 4.12 Reserving Disk Space for CD-ROM Tasks
  Record contiguous disk space:
  Record non-contiguous disk space:

Preparation Tasks completed.Schedule downtime for exclusive access.

Begin Exclusive Access Tasks.

Chapter 5 “Modifying Your System”
- 5.11 Securing the System
  Record terminated logging processes:
  Record temporary filename for the COMMAND.PUB.SYS file:
- 5.13 Applying the CSLT Modification
- 5.14 Restarting the System
- 5.16 Rerunning HPINSTAL
Chapter 6 “Finishing the Process”
- 6.1 Configuring Datacomm and UPS
- 6.4 Setting Passwords, Lockwords, and UDCs
- 6.5 Configuring Manually Installed Products
- 6.7 Performing the Final Reboot
- 6.8 Restarting Selected System Functions
- 6.9 Backing Up Your System
- 6.11 Finishing Up

Checklist F tasks completed.

If you have Reactive patches to apply, proceed to one of these checklists:

Checklist A, "Manage Patches"
Checklist B, "Manage Patches by Staging Area."

Record system change:

System name:
System type:
Date change made:
Change performed by:
OS version from:
OS version to:
Comments:

Printable version


Privacy statement	Using this site means you accept its terms	Feedback to webmaster

© Hewlett-Packard Development Company, L.P.