United States-English

HP e3000 MPE/iX System Software Maintenance Manual (Release C.75.00): HP e3000 MPE/iX Computer Systems > Chapter 2 Task Checklists

Checklist G. Update with Tape

»

Technical documentation


	Complete book in PDF


»	Feedback

» Table of Contents

» Glossary

» Index

Use this task checklist if your source material is on tape and you are using a CSLT tape to:

Update your system software version level
Update your system software version level and apply PowerPatch patches




	NOTE: You cannot apply Reactive patches at the same time you are updating the system. You must apply Reactive patches after you update the system. To apply Reactive patches (after you update the system) refer to Checklist A, "Manage Patches," or Checklist B, "Manage Patches by Staging Area."

Print a copy of this checklist for each system that you are updating.

Read and perform the steps only in the following sections:

Begin Preparation Tasks. Does not require exclusive access to the system.

Chapter 3 “Planning for Your Task”
- 3.1 Verifying Required Materials
- 3.2 General Planning Tasks
- 3.4 Checking Tape Media
- 3.5 Checking Peripherals
- 3.6 Estimating Disk Space
  Record contiguous disk space:
  Record non-contiguous disk space:
Chapter 4 “Preparing Your System”
- 4.1 Reserving Disk Space for Tape Tasks

Preparation Tasks completed. Schedule downtime for exclusive access.

Begin Exclusive Access Tasks.

Chapter 5 “Modifying Your System”
- 5.1 Securing and Backing Up the System for Tape Tasks
  Record terminated logging processes:
  Record system files with lockwords:
  Record temporary filename for the COMMAND.PUB.SYS file:
- 5.2 Applying the SLT
- 5.4 Starting the System.
- 5.7 Creating the CSLT Using AUTOINST—Select option 3 FOS, SUBSYS, PowerPatch if you have a PowerPatch tape, or if no PowerPatch, select option 4 FOS and SUBSYS.
  Record manually installed products:
  Record data communication products:
- 5.13 Applying the CSLT Modification
- 5.14 Restarting the System
- 5.15 Rerunning AUTOINST—Required only if applying PowerPatch.
Chapter 6 “Finishing the Process”
- 6.1 Configuring Datacomm and UPS
- 6.4 Setting Passwords, Lockwords, and UDCs
- 6.5 Configuring and Updating Manually Installed Products
- 6.6 Setting Up the TAR Utility
- 6.7 Performing the Final Reboot
- 6.8 Restarting Selected System Functions
- 6.9 Backing Up Your System
- 6.11 Finishing Up

Checklist G tasks completed.

If you have Reactive patches to apply, proceed to either one of these checklists:

Checklist A, "Manage Patches"
Checklist B, "Manage Patches by Staging Area"

Record system change:

System name:
System type:
Date change made:
Change performed by:
OS version from:
OS version to:
Comments:

Printable version


Privacy statement	Using this site means you accept its terms	Feedback to webmaster

© Hewlett-Packard Development Company, L.P.