Before communication between the HP e3000 and the IBM SNA
AS/400 system is possible, both systems must be configured. The
AS/400 configuration should be done first, and it consists of specifying
values for certain parameters.
The AS/400 configuration must be coordinated with the SNA
node configuration on the HP e3000. Coordination between the AS/400 system
and the SNA services also must be done. The relationships between
AS/400 parameters and HP e3000 configuration values are explained
later in this chapter and in the Node Manager's
Guide for each SNA service. Your IBM system programmer
should send copies of the AS/400 configuration to you or your Hewlett-Packard
support contact, so that this coordination can be accomplished.
The HP SNA Products Remote System Configuration
Guide explains AS/400 configuration for the SNA links.
Printable version
