Local Parameter Worksheet

Use this worksheet to collect information you will need to configure your local network node parameters. One worksheet is required for each subnetwork.

Subnetwork Name: ______________________________________________
Local NSAP: ___________________________________________________
Local Network ID (optional): ______________________________________
Subnetwork Type (check one):
CLNS over LAN (802.3) _______CONS over X.25 ______ CLNS over LAN (FDDI) ______ CLNS over X.25 _____RFC1006____
X.25 (Matching Pairs Required)
Table 3-1 Title not available (Local Parameter Worksheet)
X.25 Sub Address
X.25 Programmatic Access Name
CONS/X.25 (check all that apply)
ISO 8878 _______X.25 1980 _______X.25 1984 ______ X.25 1988______
Device Interface Name (LAN only) _____________________________ Example: lan0
CLNP Subset (CLNS only) (check one):
Null ______ NON-Segmenting ______ Full (Accept Null) ______ Full (Discard Null) ______ (Default)

Routing Information

Supply the full NSAP or a network ID (NSAP Prefix common to a group of destination NSAPs), and the NSAP of the intermediate system that will act as the router for the specified destinations.

Table 3-2 Title not available (Local Parameter Worksheet)

Network ID or NSAP

Primary Route (NSAP of IS)

Network ID or NSAP

Primary Route (NSAP of IS)

Network ID or NSAP

Primary Route (NSAP of IS)

Network ID or NSAP

Primary Route (NSAP of IS)

Network ID or NSAP

Primary Route (NSAP of IS)

Network ID or NSAP

Primary Route (NSAP of IS)

Network ID or NSAP

Primary Route (NSAP of IS)

Network ID or NSAP

Primary Route (NSAP of IS)

Local Parameter Worksheet

Technical documentation

» Table of Contents

» Glossary