(Subsystem 196)

No files listed in INPUTFILES parameter parameter.

The INPUTFILES parameter has a value of zero as its first element.

Make sure that file numbers from file opens done within your process appear in the INPUTFILES parameter. Also, make sure that a zero appears after the last file number in the INPUTFILES parameter.

The code segment number is invalid.

The caller passed in a code segment which is invalid for the process whose PIN was passed in, or the code segment is unassigned.

None.

No inputfiles parameter was specified.

You did not specify the inputfiles parameter in the HPMERGEINIT intrinsic.

Specify the inputfiles parameter.

Neither an outputfiles nor a postprocessor parameter
was specified.

You did not specify the outputfiles parameter in the HPMERGEINIT intrinsic.

Specify the outputfiles parameter.

If you specify the keycompare parameter, you must not specify the keys and numkeys parameters.

You specified both the keycompare parameter, and the keys and numkeys parameters in the HPMERGEINIT intrinsic.

Specify the keycompare parameter or the keys and numkeys parameters.

If you do not specify the keycompare parameter, you must specify the keys and numkeys parameters.

You did not specify the keys and numkeys parameters in the HPMERGEINIT intrinsic.

Specify the keys and numkeys parameters.

Illegal numkeys parameter.

The numkeys parameter does not specify the same number of keys that are described in the the numkeys parameter in HPMERGEINIT.

Make the numkeys and keys parameters pertain to the same number of keys.

The key field is not within the record length of each file.

One or more files have shorter record lengths and at least one key field extends outside of the file's record length.

Make sure your files are of the correct length and that your key field in within range of the records.

Illegal ascending/descending code.

The fourth element of the keys array parameter is not 1 or 0.

Set the fourth element of the keys array parameter to 0 for ascending or 1 for descending order.

Illegal key code.

The 3rd element in the keys array parameter in HPMERGEINIT is less than 0 or greater than 13.

Set the 3rd element in the keys array parameter to a value that is from 0-13 inclusive.

Failure on FGETINFO (inputfile).

CCL was returned from the FGETINFO intrinsic called from SORT/XL.

Make sure that the input file number hasn't been corrupted. Also refer to the MPE/iX Intrinsics Reference Manual (32650-90028).

FREAD error on the input file.

CCL was returned from the FREAD intrinsic called from SORT/XL.

Make sure that the input file number hasn't been corrupted. Also refer to the MPE/iX Intrinsics Reference Manual.

FWRITE error on the output file.

CCL was returned from the FWRITE intrinsic called from SORT/XL.

Make sure that the output file number hasn't been corrupted. Also refer to the MPE/iX Intrinsics Reference Manual.

The input record does not include all key fields.

You are using variable length records that contain records that not long enough to contain the key fields.

Set the key field in the keys parameter to be contained in the shortest record length or make sure that your shortest record is long enough to contain all your keys.

If you specify the keycompare parameter, you must not
specify the keysonly parameter.

You specified the keycompare parameter and the keys and numkeys parameters in the HPMERGEINIT intrinsic.

Specify either the keycompare parameter or the keys and numkeys parameters in HPMERGEINIT.

Insufficient stack space.

File was opened with NOBUFF and MULTI options. The stack was used for blocking/deblocking the file and has insufficient space.

Open your files with the BUFF and NOMULTI options.

Insufficient stack space for the specified allocation.

The amount of space that you specified in the memsize parameter does not allow enough room to perform the merging operation.

Increase the value of the memsize parameter or do not specify the memsize parameter and let MERGE/XL use as much stack space as it needs.

Failure on FGETINFO (outputfile).

CCL returned from the FGETINFO intrinsic called from MERGE/XL.

Make sure the output file number has not been corrupted. Also refer to the MPE/iX Intrinsics Reference Manual.

$NULL is not a valid input file.

You specified $NULL as an input file.

Change the file specification to another file.

Sort language is not supported.

The language specified in the second element of the charseq parameter array in HPMERGEINIT is not supported on your system.

Check valid language IDs by running NLUTIL. Set the second element of the charseq parameter array to a valid language ID.

NLINFO error obtaining the
length of the collating sequence
table.

Native Language (NL) not installed or internal NL error.

Contact your system manager or your Hewlett-Packard representative.

NLINFO error loading the collating sequence.

Native Language (NL) not installed or internal NL error.

Contact your system manager or your Hewlett-Packard representative.

Invalid charseq parameter.

The first element of the charseq parameter array is a value other than one.

Set the first element in the charseq array to one.

The two-byte collating sequence table is not specified.

Two-byte collating sequence table was not specified in the charseq parameter although a two-byte key was specified in the keys parameter.

Specify a two-byte sequence in both the charseq and keys parameters.

Failure on FGETINFO (two-byte collating
sequence table).

CCL returned from the FGETINFO intrinsic called from MERGE/XL.

Make sure the file number in charseq is not corrupted. Also refer to the MPE/iX Intrinsics Reference Manual.

FREAD error on the two-byte collating sequence table.

CCL returned from the FREAD intrinsic called from MERGE/XL.

Make sure the file number in charseq is not corrupted. Also refer to the MPE/iX Intrinsics Reference Manual.

The file is not a valid two-byte collating sequence table.

Error returned from NLINFO intrinsic called from MERGE/XL.

Check the file type. Also refer to the MPE/iX Intrinsics Reference Manual.

Two-byte xxxx undefined in the collating sequence table; the
largest number is assigned.

The two-byte value, xxxx, is undefined.

Change xxxx to the correct value.

The length of the two-byte key must be an even number.

The second element of the keys array parameter must be an even number if a two-byte collating sequence is specified.

Set the second element of the keys array to an even number.

The file type is not a valid two-byte
collating sequence table.

The file containing the two-byte sequence has been corrupted or Native Language (NL) not installed or internal NL error.

Contact your system manager or your Hewlett-Packard representative.

PRINT intrinsic failed in HPMERGETITLE.

You redirected output from HPMERGETITLE to a file that is too small; HPMERGETITLE requires two records in which to output information.

Allow room for at lease two records when you redirect output from HPMERGETITLE to a file.

PRINT intrinsic failed in HPMERGESTAT.

You redirected output from HPMERGESTAT to a file that is too small; HPMERGESTAT requires ten records in which to output information.

Allow room for at least ten records when you redirect output from HPMERGESTAT to a file.

Illegal numkeys parameter.

You specified the numkeys parameter in HPMERGEINIT to not correlate to the number of keys in the keys parameter.

Set the numkeys parameter to correspond to the number of keys that you specified in the keys parameter.

An invalid file number was specified in the array of input file numbers.

A file number specified in the inputfiles parameter of the HPMERGEINIT intrinsic is not a valid file number.

Don't hardcode a file number for the inputfiles parameter, make sure the file number returned from the HPFOPEN or FOPEN intrinsic is not corrupt.

PROBE failure on the status parameter of the HPMERGEINIT
intrinsic.

The address specified in the status parameter is not within the allowable address range.

Check the value of the status parameter.

PROBE failure on the inputfiles
parameter of the HPMERGEINIT intrinsic.

The address specified in the inputfiles parameter is not within the allowable address range.

Check the value of the inputfiles parameter.

PROBE failure on the outputfiles parameter of the
HPMERGEINIT intrinsic.

The address specified in the outputfiles parameter is not within the allowable address range.

Check the value of the outputfiles parameter.

PROBE failure on the keys parameter of the
HPMERGEINIT intrinsic.

The address specified in the keys parameter is not within the allowable address range.

Check the value of the keys parameter.

PROBE failure on the altseq parameter of the
HPMERGEINIT intrinsic.

The address specified in the altseq parameter is not within the allowable address range.

Check the value of the altseq parameter.

PROBE failure on the statistics parameter of the
HPMERGEINIT intrinsic.

The address specified in the statistics parameter is not within the allowable address range.

Check the value of the statistics parameter.

PROBE failure on the charseq parameter of the
HPMERGEINIT intrinsic.

The address specified in the charseq parameter is not within the allowable address range.

Check the value of the charseq parameter.

PROBE failure on the status parameter of the
HPMERGEOUTPUT intrinsic.

The address specified in the status parameter is not within the allowable address range.

Check the value of the status parameter.

PROBE failure on the buffer parameter of the
HPMERGEOUTPUT intrinsic.

The address specified in the buffer parameter is not within the allowable address range.

Check the value of the buffer parameter.

PROBE failure on the length parameter of the
HPMERGEOUTPUT intrinsic.

The address specified in the length parameter is not within the allowable address range.

Check the value of the length parameter.

PROBE failure on the status parameter of the
HPMERGEEND intrinsic.

The address specified in the status parameter is not within the allowable address range.

Check the value of the status parameter.

PROBE failure on the statistics parameter of the
HPMERGEEND intrinsic.

The address specified in the statistics parameter is not within the allowable address range.

Check the value of the statistics parameter.

PROBE failure on the status parameter of the
HPMERGEERRORMESS intrinsic.

The address specified in the status parameter is not within the allowable address range.

Check the value of the status parameter.

PROBE failure on the message parameter of the
HPMERGEERRORMESS intrinsic.

The address specified in the message parameter is not within the allowable address range.

Check the value of the message parameter.

PROBE failure on the length parameter of the
HPMERGEERRORMESS intrinsic.

The address specified in the length parameter is not within the allowable address range.

Check the value of the length parameter.

PROBE failure on the status parameter of the
HPMERGESTAT intrinsic.

The address specified in the status parameter is not within the allowable address range.

Check the value of the status parameter.

PROBE failure on the statistics parameter of the
HPMERGESTAT intrinsic.

The address specified in the statistics parameter is not within the allowable address range.

Check the value of the statistics parameter.

PROBE failure on the status parameter of the
HPMERGETITLE intrinsic.

The address specified in the status parameter is not within the allowable address range.

Check the value of the status parameter.

An unexpected internal error was detected.

An error was detected, however, because it was an unexpected error (illegal pointer, arithmetic trap, etc.) a more specific error status could not be returned.

Contact your Hewlett-Packard representative.

SWITCH_TO_CM failed on the MERGETITLE call.

Internal MERGE/XL error.

Contact your Hewlett-Packard representative.

SWITCH_TO_CM failed on the MERGEERRORMESS call.

Internal MERGE/XL error.

Contact your Hewlett-Packard representative.

SWITCH_TO_CM failed on the MERGEEND2 call.

Internal MERGE/XL error.

Contact your Hewlett-Packard representative.

SWITCH_TO_CM failed on the MERGEEND1 call.

Internal MERGE/XL error.

Contact your Hewlett-Packard representative.

SWITCH_TO_CM failed on the MERGEOUTPUT call.

Internal MERGE/XL error.

Contact your Hewlett-Packard representative.

SWITCH_TO_CM failed on the MERGEGETHIDP call.

Internal MERGE/XL error.

Contact your Hewlett-Packard representative.

SWITCH_TO_CM failed on the MERGEINIT call.

Internal MERGE/XL error.

Contact your Hewlett-Packard representative.

HPMERGEERRORMESS failed on the call to HPERRMSG.

You called the HPMERGEERRORMESS intrinsic even though there was no error.

Only call HPMERGEERRORMESS if the status parameter from the previous intrinsic call does not equal zero.