 |
» |
|
|
 |
|  |  |
- 1610
- MESSAGE
! NOT STORED: READ ACCESS REQUIRES USER TO KNOW THE LOCKWORD - CAUSE
User must know the lockword to access the file. - ACTION
Ask the account/system manager to store the file.
- 1611
- MESSAGE
! NOT STORED: USER DOES NOT HAVE READ ACCESS - CAUSE
The operation requires that you have Read Access
to the file. - ACTION
Request your system manager to store the file.
- 1612
- MESSAGE
! NOT STORED: READ ACCESS REQUIRES (AM) CAPABILITY - CAUSE
User lacks AM capability required to access the
file. - ACTION
Ask the account/system manager to store the file.
- 1613
- MESSAGE
! NOT STORED: READ ACCESS REQUIRES (SM) CAPABILITY - CAUSE
User lacks SM capability required to access the
file. - ACTION
Ask the system manager to store the file.
- 1614
- MESSAGE
! NOT STORED: READ ACCESS REQUIRES (GL) CAPABILITY - CAUSE
User lacks GL capability required to access the
file. - ACTION
Ask the account/system manager to store the file.
- 1615
- MESSAGE
! NOT STORED: READ ACCESS REQUIRES USER TO BE A MEMBER OF THE GROUP WHERE THE FILE RESIDES. - CAUSE
User must be a group member to access the file. - ACTION
Ask the account/system manager to store the file.
- 1616
- MESSAGE
! NOT STORED: READ ACCESS REQUIRES (AL) CAPABILITY - CAUSE
User lacks AL capability required to access the
file. - ACTION
Ask the account/system manager to store the file.
- 1617
- MESSAGE
! NOT STORED: READ ACCESS REQUIRES (PM) CAPABILITY - CAUSE
User lacks PM capability required to access the
file. - ACTION
Ask the account/system manager to store the file
- 1618
- MESSAGE
! COULD NOT BE CLOSED DURING ABNORMAL TERMINATION - CAUSE
Store could not close this file during abnormal termination. - ACTION
Call your support representative.
- 1619
- MESSAGE
FILE MAY BE INACCESSIBLE OR BECOME INCONSISTANT IF ACCESSED - CAUSE
Store could not close the file in a consistent state. - ACTION
Call your support representative.
- 1620
- MESSAGE
! COULD NOT BE RELEASED FROM STORE EXCLUSIVE ACCESS (LAT) - CAUSE
The file could not be released from global locking
table. - ACTION
Call your support representative.
- 1621
- MESSAGE
! NOT STORED: ENCOUNTERED OPEN FAILURE ON FILE - CAUSE
Store locked the file but failed to open it. - ACTION
Call your support representative.
- 1622
- MESSAGE
! COULD NOT BE CLOSED DURING STORE OPERATION - CAUSE
Store encountered an error trying to close the file. - ACTION
Call your support representative.
- 1623
- MESSAGE
! NOT PURGED: STORE COULD NOT GAIN OPEN ACCESS TO THE FILE - CAUSE
File security violation or file is in use. - ACTION
Check your capabilities, file security and if file
is in use.
- 1624
- MESSAGE
! NOT PURGED: LOCKWORD VIOLATION ENCOUNTERED ON FILE OPEN - CAUSE
Incorrect lockword was supplied to FOPEN. - ACTION
Retry with correct lockword.
- 1625
- MESSAGE
! NOT PURGED: FILE IS PROBABLY IN USE SINCE CLOSE FAILED - CAUSE
File is opened by some other user. - ACTION
Check if file is in use and retry.
- 1626
- MESSAGE
! NOT FULLY STORED: DISC READ FAILURE - CAUSE
Data could not be obtained from the disk. - ACTION
Call your support representative.
- 1627
- MESSAGE
! NOT FULLY STORED: INCOMPLETE DATA ON MEDIA - CAUSE
Data could not be obtained from the disk. - ACTION
Call your support representative.
- 1628
- MESSAGE
! NOT PURGED: LABEL MANAGEMENT ENCOUNTERED ERROR ACCESSING FILE LABEL - CAUSE
Someone purged the file before STORE could try. - ACTION
Check that the file is purged.
- 1629
- MESSAGE
! NOT STORED: FILE IS NOT IN SPECIFIED SPLIT VOLUME SET LIST "SPLITVS" - CAUSE
This particular file cannot be stored because it
cannot be found in the split volume set. - ACTION
Verify that the file resides in the specified split
volume set and retype the command.
- 1630
- MESSAGE
! NOT STORED: FILE IS NOT IN ANY SPECIFIED VOLUME SET LIST "ONVS OR SPLITVS" - CAUSE
This particular file is not stored becuase it cannot
be found either on the specified volumeset or the split volumeset. - ACTION
Make sure the file exists and retype the command.
- 1631
- MESSAGE
! NOT STORED : FILE IS NOT ARCHIVABLE. - CAUSE
The non-archive bit is on for the specified file,
meaning that it cannot by copied by STORE. - ACTION
Remove these files from your STORE command, or ignore the
warnings.
- 1632
- MESSAGE
STORE ENCOUNTERED INTERNAL ERROR ON PREFETCH. - CAUSE
Internal error occurred during STORE operation. - ACTION
Contact your HP Support Representative for further assistance.
- 1633
- MESSAGE
! NOT STORED: STATE CHANGE DATE IS ! - CAUSE
The file did not satisfy the date >= criteria. - ACTION
Check the file's state change date and option date.
- 1634
- MESSAGE
! NOT STORED: ACCESS CHECK ROUTINE TRAPPED - CAUSE
Internal error occurred during store. - ACTION
Contact your HP Support representative.
- 1635
- MESSAGE
! NOT STORED: ACCOUNT NAME REDIRECTION REQUIRES (SM,OP) CAPABILITY - CAUSE
The user does not have the capability to rename
all parts of the file specified by '!'. STORE continues without
storing this file. - ACTION
Ask the system administrator or system operator
to store the desired redirected files.
- 1636
- MESSAGE
! NOT STORED: CREATOR NAME REDIRECTION REQUIRES (SM,OP,AM) CAPABILITY - CAUSE
The user does not have the capability to rename
the creator of the file specified by '!'. STORE continues without storing
this file. - ACTION
Ask the system administrator or system operator
to store the desired redirected files.
- 1637
- MESSAGE
! NOT STORED: CREATOR NAME REDIRECTION CANNOT BE DONE TO SPOOL FILES - CAUSE
No user may rename the creator of a spool file.
File, group, and account renaming is acceptable however the user must
have the appropriate capabilities in order to do so. STORE continues
without storing this file. - ACTION
Information only. Do not try to rename the creator
of spool files in future STORE commands.
- 1638
- MESSAGE
! NOT STORED: FILE NAME REDIRECTION REQUIRES THE USER TO BE FILE CREATOR - CAUSE
The user does not have the capability to rename
the file specified by '!'. STORE continues without storing this
file. - ACTION
Ask the creator of the file to store this file for
you. Or, remove the file from your input file list.
- 1639
- MESSAGE
! WILL BE STORED WITH ACD: ACD CANNOT BE DELETED AS INTENDED BY OPTION NOACD. - CAUSE
ACD is a required component of this file, so the
file will be stored with ACD. - ACTION
Information only, no action required.
- 1640
- MESSAGE
! NOT RESTORED : ACCESS CHECK ROUTINE TRAPPED - CAUSE
This particular file was not restored due to internal
error. - ACTION
Contact your HP Support Representative for further assistance.
- 1641
- MESSAGE
! NOT RESTORED : ACD DELETION (NOACD) DENIED - CAUSE
User does not have the proper capability to delete
ACD. - ACTION
Have operator restore file.
- 1643
- MESSAGE
! NOT STORED: SOURCE NAME DOES NOT HAVE COMPONENT FOR SUBSTITUTION - CAUSE
A wildcard in redirected filename does not have corresponding
part in source name. - ACTION
Ensure that wildcards in redirected pathname has
an equivalent component in source pathname.
- 1644
- MESSAGE
! NOT STORED: TARGET NAME IS NOT LEGAL MPE FILE NAME - CAUSE
You have entered an invalid target name for RENAME option. - ACTION
Retype the command and include a valid target file
name.
- 1701
- MESSAGE
STORE OPERATION IS !% COMPLETE (S/R 1701) - CAUSE
Store progress timer interrupt. - ACTION
None.
- 1702
- MESSAGE
STORE ENCOUNTERED SYNCHRONIZATION ERROR REWRITING MEDIA. (S/R 1702) - CAUSE
Store internal errors. - ACTION
Call your Hewlett-Packard Support Representative.
- 1705
- MESSAGE
READ FAILURE STARTED AT BYTE OFFSET ! FOR ! BYTES. (S/R 1705) - CAUSE
Data could not be obtained from the disk. - ACTION
Call your Hewlett-Packard Support Representative.
- 1709
- MESSAGE
STORE ENCOUNTERED ERROR OBTAINING VOLUMESET ID OF THE SYSTEM: VOLUME MANAGEMENT ERROR !. (S/R 1709) - CAUSE
Store got bad system volume set id during directory
scan. - ACTION
Call your Hewlett-Packard Support Representative.
- 1710
- MESSAGE
STORE ENCOUNTERED ERROR OBTAINING VOLUMESET DIRECTORY INFORMATION: VOLUME MANAGEMENT ERROR !. (S/R 1710) - CAUSE
Store encountered error during directory scan phase. - ACTION
Call your Hewlett-Packard Support Representative.
- 1711
- MESSAGE
STORE ENCOUNTERED ERROR CREATING THE DIRECTORY ACCOUNTING STRUCTURE MAP FOR THE VOLUMESET "!". (S/R 1711) - CAUSE
Store failed to create the directory map. - ACTION
Call your Hewlett-Packard Support Representative.
- 1712
- MESSAGE
WARNING AN EMPTY FILESET WAS FOUND, '@' WILL BE ASSUMED. (S/R 1712) - CAUSE
File set was not specified so default is assumed. - ACTION
If you do not want the default then abort and retry.
- 1713
- MESSAGE
NO FILES WERE FOUND TO STORE BASED ON THE SELECTION CRITERIA. (S/R 1713) - CAUSE
No files matched the file set definition. - ACTION
Check the file set and use listf to see if they
exist.
- 1714
- MESSAGE
TOO FEW FILES (!) WERE FOUND TO BE DISTRIBUTED ACROSS ! STORE SETS. (S/R 1714) - CAUSE
The number of files to be stored is less than number
of store sets. - ACTION
Use lesser number of store sets.
- 1716
- MESSAGE
STORE CANNOT OPEN 'SYSLIST' AS A NEW FILE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED. (S/R 1716) - CAUSE
A file equation equates syslist to a new file. - ACTION
Change the file equation to an acceptable format.
- 1717
- MESSAGE
STORE CANNOT OPEN 'SYSLIST' AS A NEW "REMOTE" FILE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED (S/R 1717) - CAUSE
A file equation equates syslist to a new remote
file. - ACTION
Change the file equation to an acceptable format.
- 1718
- MESSAGE
STORE CANNOT OPEN 'SYSLIST' AS A "REMOTE" SPOOLFILE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED. (S/R 1718) - CAUSE
A file equation equates syslist to a remote spool
file. - ACTION
Change the file equation to an acceptable format.
- 1719
- MESSAGE
STORE CANNOT OPEN 'SYSLIST' AS A "REMOTE" DEVICE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED (S/R 1719) - CAUSE
A file equation equates syslist to a remote device. - ACTION
Change the file equation to an acceptable format.
- 1720
- MESSAGE
STORE CANNOT OPEN 'OFFLINE' AS A NEW FILE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED. (S/R 1720) - CAUSE
A file equation equates offilne to a new file. - ACTION
Change the file equation to an acceptable format.
- 1721
- MESSAGE
STORE CANNOT OPEN 'OFFLINE' AS A NEW "REMOTE" FILE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED. (S/R 1721) - CAUSE
A file equation equates offline to a remote file. - ACTION
Change the file equation to an acceptable format.
- 1722
- MESSAGE
STORE CANNOT OPEN 'OFFLINE' AS A "REMOTE" SPOOLFILE. ONLY PERMANENT, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED. (S/R 1722) - CAUSE
A file equation equates offline to a remote spool
file. - ACTION
Change the file equation to an acceptable format.
- 1723
- MESSAGE
STORE CANNOT OPEN 'OFFLINE' AS A "REMOTE" DEVICE. ONLY PERMANEN T, TEMPORARY, AND LOCAL (AS OPPOSED TO REMOTE) SPOOLFILES MAY BE USED. (S/R 1723) - CAUSE
A file equation equates offline to a remote device. - ACTION
Change the file equation to an acceptable format.
- 1729
- MESSAGE
STORE WAS UNABLE TO OBTAIN A TIMER ENTRY FOR THE 'PROGRESS' OPTION. CLOCKS ERROR: !. STORE WILL CONTINUE ANYWAY. (S/R 1729) - CAUSE
Store could not communicate with the system timer. - ACTION
Abort and try again if you must have progress messages.
- 1730
- MESSAGE
STORE ENCOUNTERED A SYSTEM SECURITY VIOLATION DURING INITIALIZATION. (S/R 1730) - CAUSE
Internal security violation. - ACTION
Call your Hewlett-Packard Support Representative.
- 1731
- MESSAGE
MEDIA RECORD SIZE SPECIFIED IS TO SMALL TO HOUSE STORE'S FILE INFORMATION IN ONE RECORD. MINIMUM SIZE IS !. (S/R 1731) - CAUSE
The file label etc is not fitting in one media record. - ACTION
Set a larger media record size by a file equation.
- 1732
- MESSAGE
STORE RAN OUT OF VIRTUAL SPACE CREATING THE MEDIA DIRECTORY OF FILES TO BE STORED. (S/R 1732) - CAUSE
Virtual space fragmentation caused store to run
out of space. - ACTION
Retry store when the system is less loaded.
- 1733
- MESSAGE
STORE RAN OUT OF DISC SPACE CREATING THE MEDIA DIRECTORY OF FILES TO BE STORED. (S/R 1733) - CAUSE
Too little disk space on the system. - ACTION
Create some free disk space.
- 1734
- MESSAGE
STORE WAS UNABLE TO SET THE ACCESS DENSITY IN THE LDT. SHOWDEV MAY REPORT FALSE DENSITY INFORMATION. (S/R 1734) - CAUSE
Store could not communicate with the logical device
table. - ACTION
Call your Hewlett-Packard Support Representative.
- 1735
- MESSAGE
WARNING: FILE 'SYSLIST' RECORD SIZE IS TOO SMALL TO DISPLAY MESSAGES. THE 'SYSLIST' FILE IS REDIRECTED TO $STDLIST. MINIMUM RECORD SIZE IS 80 BYTES. (S/R 1735) - CAUSE
The syslist record size is set too small. - ACTION
Set a larger record size and retry.
- 1736
- MESSAGE
WARNING: FILE 'OFFLINE' RECORD SIZE IS TOO SMALL TO DISPLAY MESSAGES. THE 'OFFLINE' FILE IS REDIRECTED TO $STDLIST. MINIMUM RECORD SIZE IS 80 BYTES. (S/R 1736) - CAUSE
The offline record size is set too small. - ACTION
Set a larger record size and retry.
- 1737
- MESSAGE
STORE ENCOUNTERED INTERNAL PREFETCH ZERO LENGTH ERROR (S/R 1737) - CAUSE
Internal error occurred during STORE operation. - ACTION
Contact your HP Support Representative.
- 1738
- MESSAGE
STORE WAS UNABLE TO ALLOCATE SPACE FOR 'COMPRESS' OPTION BUFFERS AND CONTROL BLOCKS: VSM ERROR ! (S/R 1738) - CAUSE
Store/Restore could not allocate the space needed
to do compression. - ACTION
Remove the COMPRESS option from the STORE command
line, or wait until the system has more memory. If the problem persists,
contact your HP representative.
- 1739
- MESSAGE
TOTAL MEDIA WRITTEN : - CAUSE
This is the total number of media written for this
STORE. - ACTION
Information only. Compare to the actual physical
media to make sure you have all the media from this backup.
- 1740
- MESSAGE
MEDIA WRITTEN FOR SET ! : - CAUSE
This is the total number of media written for the
specified parallel storeset. - ACTION
Information only. Compare to the actual physical
media to make sure you have all the media from this storeset.
- 1741
- MESSAGE
SENDMAIL TO SYSGEN FROM STORE FAILED. (S/R 1741) - CAUSE
Internal error occurred during the creation of combined SLT/Store
set. - ACTION
Contact your HP Support Representative.
- 1742
- MESSAGE
WARNING: STORE WILL OVERRIDE HPCMSTORE VARIABLE. (S/R 1742) - CAUSE
Although the HPCMSTORE CI variable is set to TRUE, SYSGEN
will override it and call NMStore. - ACTION
Information only.
- 1743
- MESSAGE
REEL WITH BOTH SLT AND STORE FILES CAN NOT BE RECOVERED. (S/R 1743) - CAUSE
Unable to recover files from combined SLT/Store
set due to internal error. - ACTION
Contact your HP Support Representative.
- 1744
- MESSAGE
STORE ENCOUNTERED ERROR WHILE RETRIEVING ANCESTOR INFORMATION. (S/R 1744) - CAUSE
Store encountered an error may be because the grandparent
process who invoked the store is not either HPINSTAL or AUTOINST. - ACTION
Verify the grandparent process is either HPINSTAL
or AUTOINST.
- 1766
- MESSAGE
STORE ENCOUNTERED DISC FILE TOO SMALL TO WRITE DIRECTORY ON FILE "!" (S/R 1766) - CAUSE
The disk file specified for a store-to-disk was
not large enough to hold the directory information. - ACTION
Specify a larger file for the backup, or let STORE
create the disk file.
- 1767
- MESSAGE
STORE NEEDS DISC FILE TO HAVE AT LEAST ! SECTORS TO FIT ALL DIRECTORY INFORMATION (S/R 1767) - CAUSE
The disk file specified for a store-to-disk was
not large enough to hold the directory information. It should be
at least as big as specified in the message. - ACTION
Specify a larger file for the backup, or let STORE
create the disk file.
- 1801
- MESSAGE
! NOT RESTORED: MEDIA READ ERROR ON FILE. - CAUSE
A read error encountered on the media. - ACTION
Use onerror=skip or a duplicate tape set.
- 1802
- MESSAGE
! NOT RESTORED: FILE HAD DATA ON A MEDIA THAT WAS NOT MOUNTED (SKIPPED) - CAUSE
Operator forced a media skip. - ACTION
Redo the restore command if this file is needed.
- 1803
- MESSAGE
! NOT RESTORED: FILE COULD NOT BE FOUND BECAUSE OF DAMAGED MEDIA LABEL RECOVERY - CAUSE
This particular file can not be restored due to
bad media label. - ACTION
To ensure complete data retrieval use duplicate
store set and contact your HP support representative.
- 1804
- MESSAGE
! NOT RESTORED: MEDIA READ ERROR OR FILE COULD NOT BE FOUND BECAUSE OF DAMAGED MEDIA LABEL RECOVERY - CAUSE
This particular file could not be restored due to
either media read error or bad media label. - ACTION
To ensure complete data retrieval use duplicate
store set and contact your HP support representative for further assistance.
- 1805
- MESSAGE
! NOT RESTORED: FILE HAD DATA ON A MEDIA THAT WAS NOT MOUNTED (SKIPPED) OR FILE COULD NOT BE FOUND BECAUSE OF DAMAGED MEDIA LABEL RECOVERY - CAUSE
Unable to restore this file due to either bad file
label or the file not found in the mounted media. - ACTION
To ensure complete data retrieval use duplicate
store set and contact your HP Support representative for further assistance.
- 1806
- MESSAGE
! NOT RESTORED: MEDIA READ ERROR OR FILE HAD DATA ON A MEDIA THAT WAS NOT MOUNTED (SKIPPED) - CAUSE
Media read error encountered or a media was skipped. - ACTION
Try onerror=skip or use a duplicate tape set and
retry.
- 1807
- MESSAGE
! NOT RESTORED: MEDIA READ ERROR OR FILE HAD DATA ON A MEDIA THAT WAS NOT MOUNTED (SKIPPED) OR FILE COULD NOT BE FOUND BECAUSE OF DAMAGED MEDIA LABEL RECOVERY - CAUSE
Same as message. - ACTION
To ensure complete data retrieval use duplicate
store set and contact your HP Support Representative.
- 1808
- MESSAGE
! NOT RESTORED: OLD COPY EXISTS: KEEP SPECIFIED - CAUSE
A disk copy of the file exists. - ACTION
Exclude keep option if you desire the file to be
over written.
- 1809
- MESSAGE
! COULD NOT BE GIVEN SPECIFIED VOLUME RESTRICTIONS - CAUSE
The file could not be restored to specified volume/volclass/volset. - ACTION
Check group restrictions and disk space restrictions.
- 1810
- MESSAGE
! COULD NOT BE RESTRICTED TO THE SYSTEM MASTER VOLUME - CAUSE
Some file data had to be placed on non system master. - ACTION
Make more free space on system master and retry.
- 1811
- MESSAGE
! NOT RESTORED: HPFOPEN RAW FAILED - CAUSE
File open with the file information on tape failed. - ACTION
Call your support representative.
- 1812
- MESSAGE
! NOT RESTORED: MEDIA RECORD HEADER BLOCK CORRUPTED/INVALID - CAUSE
The header block of a media record is bad. - ACTION
Call your support representative.
- 1813
- MESSAGE
! NOT RESTORED: STORE OF FILE FAILED DURING MEDIA CREATION - CAUSE
The file was not stored due to open failure. - ACTION
None.
- 1814
- MESSAGE
! NOT RESTORED: DISC ALLOCATION FAILURE - CAUSE
Too little free disk space. - ACTION
Create more disk space and retry.
- 1815
- MESSAGE
! NOT RESTORED: ENCOUNTERED PRIVILEGE VIOLATION PURGING OLD FILE - CAUSE
The negative file code on media does not match the
one on disk. - ACTION
First purge the disk copy and then retry.
- 1816
- MESSAGE
! NOT RESTORED: ENCOUNTERED LOCKWORD VIOLATION PURGING OLD FILE - CAUSE
The lockword on nedia does not match the one on
disk and the user typed an incorrect lockword when prompted. - ACTION
First purge the disk copy and then retry or type
the correct lockword as on disk when prompted.
- 1817
- MESSAGE
! DOES NOT HAVE OLD FILE DATES. MECHANISM TO SET OLDDATE FAILED - CAUSE
The old file dates on media could not be set. - ACTION
Call your support representative.
- 1818
- MESSAGE
! NOT RESTORED: FAILED SAVE OF NEW FILE - CAUSE
RESTORE could not save the newly restored file. - ACTION
Call your support representative.
- 1819
- MESSAGE
! WAS ONLY PARTIALLY RECOVERED (RESTORED) DUE TO MEDIA READ ERRORS - CAUSE
The option ONERROR=FULL caused the file to be recovered
partially. - ACTION
Check file consistency and purge if partial recovery
is not needed.
- 1820
- MESSAGE
! NOT RESTORED: DISC FILE IN USE, CANNOT PURGE - CAUSE
Some user has the file open so it can not be restored. - ACTION
Retry when no one is using the file.
- 1821
- MESSAGE
! NOT RESTORED: NOT ALL OF THE DATA WAS WRITTEN AT STORE TIME - CAUSE
Disk read error was encountered at store time. - ACTION
Use media with valid copy of the file.
- 1822
- MESSAGE
! DID NOT HAVE ALL OF ITS DATA WRITTEN TO THE MEDIA AT STORE TIME - CAUSE
Disc read error was encountered at store time. - ACTION
Use media with valid copy of the file.
- 1823
- MESSAGE
! NOT RESTORED: CAN'T ACCESS (MAP IN) TARGET DIRECTORY A NODE IN THE PATH MAY HAVE EXTENTS ON UNMOUNTED VOLUMES. - CAUSE
All the volumes in the set are not mounted. - ACTION
Mount all volumes.
- 1824
- MESSAGE
! NOT RESTORED: UNKNOWN DIRECTORY ERROR ENCOUNTERED - CAUSE
STORE internal error. - ACTION
Call your support representative.
- 1825
- MESSAGE
! NOT RESTORED: USER VOLUME SET THAT GROUP/ACCOUNT ACCESS IS NOT MOUNTED. - CAUSE
The home volume set is not mounted. - ACTION
Mount the volume set.
- 1826
- MESSAGE
! NOT RESTORED: ACCOUNT DOES NOT EXIST ON USER VOLUME SET. (I.E. ACCOUNT ON THE SYSTEM VOLUMESET LACKS MIRROR ON USER VS) - CAUSE
Directory structure discrepency. - ACTION
Call your support representative.
- 1827
- MESSAGE
! NOT RESTORED: GROUP DOES NOT EXIST ON USER VOLUME SET. (I.E. GROUP ON THE SYSTEM VOLUMESET LACKS MIRROR ON USER VS) - CAUSE
Directory structure discrepency. - ACTION
Call your support representative.
- 1828
- MESSAGE
! NOT RESTORED: DATA WRITE FAILURE (DISC WRITE FAILED) - CAUSE
Attempt to move data from media to disk failed. - ACTION
Call your support representative.
- 1829
- MESSAGE
! ENCOUNTERED AS DATA LOSS DUE TO A MEDIA READ ERROR(S) - CAUSE
Media read error. - ACTION
Retry with a duplicate media set.
- 1830
- MESSAGE
! NOT RESTORED: FILE IS NOT IN SPECIFIED FILE CODE RANGE LIST - CAUSE
The file code is not within the FCRANGE option range. - ACTION
Check the FCRANGE parameter and file code.
- 1831
- MESSAGE
! NOT RESTORED: READ ACCESS REQUIRES (AM) CAPABILITY - CAUSE
User lacks AM capability required to read the file. - ACTION
Ask the account/system manager to restore the file.
- 1832
- MESSAGE
! NOT RESTORED: READ ACCESS REQUIRES (SM) CAPABILITY - CAUSE
User lacks SM capability required to read the file. - ACTION
Ask the system manager to restore the file.
- 1833
- MESSAGE
! NOT RESTORED: READ ACCESS REQUIRES (GL) CAPABILITY - CAUSE
User lacks GL capability required to read the file. - ACTION
Ask the account/system manager to restore the file.
- 1834
- MESSAGE
! NOT RESTORED: READ ACCESS REQUIRES USER TO BE A MEMBER OF THE GROUP WHERE THE FILE RESIDED. - CAUSE
User should be the group member to read the file. - ACTION
Ask the account/system manager to restore the file.
- 1835
- MESSAGE
! NOT RESTORED: READ ACCESS REQUIRES (AL) CAPABILITY - CAUSE
User lacks AL capability required to read the file. - ACTION
Ask the account/system manager to restore the file.
- 1836
- MESSAGE
! NOT RESTORED: READ ACCESS REQUIRES (PM) CAPABILITY - CAUSE
User lacks PM capability required to read the file. - ACTION
Ask the system manager to restore the file.
- 1837
- MESSAGE
! NOT RESTORED: READ ACCESS REQUIRES USER TO BE FILE'S CREATOR - CAUSE
Users other than the creator need am/sm to read
the file. - ACTION
Ask the account/system manager to restore the file.
- 1838
- MESSAGE
! NOT RESTORED: READ ACCESS REQUIRES (CR) CAPABILITY - CAUSE
User lacks cr capability required to read the file. - ACTION
Ask the account/system manager to restore the file.
- 1839
- MESSAGE
! NOT RESTORED: READ ACCESS REQUIRES USER TO KNOW THE LOCKWORD - CAUSE
User must supply the lockword to read the file. - ACTION
Supply lockword or ask the account/system manager
to restore the file.
- 1840
- MESSAGE
! NOT RESTORED: USER DOES NOT HAVE READ ACCESS - CAUSE
The operation requires that you have Read Access
to the file. - ACTION
Request your system manager to restore the file.
- 1841
- MESSAGE
! NOT RESTORED: SPECIFIED GROUP DOES NOT EXIST. 'CREATE=GROUP' REQUIRED. - CAUSE
The file group does not exist in the directory. - ACTION
Use create=group option.
- 1842
- MESSAGE
! NOT RESTORED: CREATION OF GROUP DIRECTORY NODE FAILED. - CAUSE
STORE internal error. - ACTION
Call your support representative.
- 1843
- MESSAGE
! NOT RESTORED: SPECIFIED ACCOUNT DOES NOT EXIST. 'CREATE=ACCOUNT' REQUIRED. - CAUSE
The file account does not exist in the directory. - ACTION
Use CREATE=account option.
- 1844
- MESSAGE
! NOT RESTORED: CREATION OF ACCOUNT DIRECTORY NODE FAILED. - CAUSE
STORE internal error. - ACTION
Call your support representative.
- 1845
- MESSAGE
! NOT RESTORED: DIRECTORY ERROR ENCOUNTERED ACCESSING GROUP OR ACCOUNT NODE - CAUSE
STORE directory interface error. - ACTION
Call your support representative.
- 1846
- MESSAGE
! NOT RESTORED: GROUP OR ACCOUNT DIRECTORY NODE(S) COULD NOT BE ACCESSED. THEY MAY HAVE EXTENTS ON UNMOUNTED VOLUMES. - CAUSE
Some unmounted volumes in the parent volumest. - ACTION
Mount all volumes and retry.
- 1847
- MESSAGE
! NOT RESTORED: CREATOR DOES NOT EXIST IN SPECIFIED ACCOUNT. 'CREATE=CREATOR' REQUIRED. - CAUSE
The file creator does not exist in the directory. - ACTION
Use CREATE=creator option.
- 1848
- MESSAGE
! NOT RESTORED: CREATION OF USER DIRECTORY NODE FAILED FOR FILE CREATOR. - CAUSE
STORE internal error. - ACTION
Call your support representative.
- 1849
- MESSAGE
! NOT RESTORED: ACCOUNT WAS MADE INACCESSIBLE OR PURGED DURING CREATION OF FILE CREATOR. - CAUSE
STORE internal error. - ACTION
Call your support representative.
- 1850
- MESSAGE
! NOT RESTORED: USER OR ACCOUNT DIRECTORY NODE(S) COULD NOT BE ACCESSED. THEY MAY HAVE EXTENTS ON UNMOUNTED VOLUMES. - CAUSE
Some unmounted volumes in the parent volumest. - ACTION
Mount all volumes and retry.
- 1851
- MESSAGE
! NOT RESTORED: DIRECTORY ERROR ENCOUNTERED ACCESSING USER NODE. - CAUSE
STORE directory interface error. - ACTION
Call your support representative.
- 1852
- MESSAGE
! NOT RESTORED: SAVE ACCESS REQUIRES (AM) CAPABILITY - CAUSE
User lacks am capability required to save the file. - ACTION
Ask the account/system manager to restore the file.
- 1853
- MESSAGE
! NOT RESTORED: SAVE ACCESS REQUIRES (SM) CAPABILITY - CAUSE
User lacks SM capability required to save the file. - ACTION
Ask the system manager to restore the file.
- 1854
- MESSAGE
! NOT RESTORED: SAVE ACCESS REQUIRES (GL) CAPABILITY - CAUSE
User lacks GL capability required to save the file. - ACTION
Ask the account/system manager to restore the file.
- 1855
- MESSAGE
! NOT RESTORED: SAVE ACCESS REQUIRES USER TO BE A MEMBER OF THE GROUP WHERE THE FILE WILL RESIDE. - CAUSE
User must be a group member to save the file. - ACTION
Ask the account/system manager to restore the file.
- 1856
- MESSAGE
! NOT RESTORED: SAVE ACCESS REQUIRES (AL) CAPABILITY - CAUSE
User lacks AL capability required to save the file. - ACTION
Ask the account/system manager to restore the file.
- 1857
- MESSAGE
! NOT RESTORED: GROUP DOES NOT EXIST ON SYSTEM. - CAUSE
The file group does not exist. - ACTION
Use create=group option.
- 1858
- MESSAGE
! NOT RESTORED: ACCOUNT DOES NOT EXIST ON SYSTEM. - CAUSE
The file account does not exist. - ACTION
Use create=account option.
- 1859
- MESSAGE
! NOT RESTORED: FILE EOF IS GREATER THAN FILE LIMIT. - CAUSE
File system discrepency. - ACTION
Call your support representative.
- 1860
- MESSAGE
! NOT RESTORED : USER DOES NOT HAVE WRITE/PURGE ACCESS. - CAUSE
User lacks capabilities to purge old file. - ACTION
Ask the owner of the file, or the system manager
or operator to restore this file for you.
- 1862
- MESSAGE
! NOT RESTORED: NOT ALL OF LOG DATA WAS WRITTEN AT STORE TIME - CAUSE
Due to an error writing out the log data for this
file at Store time, Restore was not able to completely recover the file.
Therefore, it was not restored at all. - ACTION
Try restoring the file from a duplicate backup,
if possible.
- 1863
- MESSAGE
! DID NOT HAVE ALL OF ITS LOG DATA WRITTEN TO THE MEDIA AT STORE TIME - CAUSE
Due to an error writing out the log data for this
file at Store time, Restore was not able to completely recover the file.
Therefore, it was not restored at all. - ACTION
Try restoring the file from a duplicate backup,
if possible.
- 1864
- MESSAGE
! FAILED TO RECOVER PORTIONS OF COMPRESSED DATA - CAUSE
The system failed to recover portions of compressed
data for this file due to internal error. - ACTION
Contact your HP Support representative for further assistance.
- 1868
- MESSAGE
! NOT RESTORED: GROUP WAS MADE INACCESSIBLE OR PURGED DURING CREATION OF THE PATH. - CAUSE
Unable to resolve the path name for this particular
file because the group is either purged or inaccessible. - ACTION
Check the syntax and retype the command.
- 1869
- MESSAGE
! NOT RESTORED: ACCOUNT WAS MADE INACCESSIBLE OR PURGED DURING CREATION OF THE PATH. - CAUSE
Unable to resolve the path name for this particular
file because the account is either purged or inaccessible. - ACTION
Check the syntax and retype the command.
- 1871
- MESSAGE
! NOT RESTORED: ACCOUNT PART OF THE CREATOR NAME DOES NOT EXIST. OPTION 'CREATE=ACCOUNT' REQUIRED. - CAUSE
This particular file is not stored because the account
does not exist in the system. - ACTION
Make sure either the account where the file needs
to be stored exists or specify create=account in your command.
- 1872
- MESSAGE
! NOT RESTORED: LACK CREATE ACCESS IN DIRECTORY - CAUSE
This file is not stored because you do not have
the proper capabilities. - ACTION
To store any directory you require SM or OP capability.
- 1873
- MESSAGE
! NOT RESTORED: LACK TRAVERSE ACCESS ON DIRECTORY - CAUSE
User does not have traverse access of a directory
in the path of file to be restored. - ACTION
Have operator restore file for user.
- 1874
- MESSAGE
! NOT RESTORED: LACK SAVE ACCESS ON DIRECTORY - CAUSE
Attempted to insert an entry in a hierarchical directory without
Create Directory Entry (CD) permission. - ACTION
Have operation performed by user with SM or AM capabilities,
or have directory owner or system manager ALTSEC the directory to
allow this operation.
- 1875
- MESSAGE
! NOT RESTORED: FILE WAS PURGED DURING STORE - CAUSE
The file specified was purged before the sync point
when it was stored during a 7x24 True-Online backup. - ACTION
Information only.
- 1876
- MESSAGE
! NOT RESTORED: FAILED TO SET AI LAT BIT BECAUSE THE FILE IS BEING RESTORED BY ANOTHER PROCESS. - CAUSE
The file specified is being restored by another
RESTORE. - ACTION
Wait until the other restore is complete, then restore
the file again.
- 1877
- MESSAGE
! NOT RESTORED: FAILED TO SET AI LAT BIT DURING RESTORE. ENCOUNTE RED ERROR ! FROM LAT SUBSYSTEM. - CAUSE
RESTORE was unable to set the after image LAT bit
for this file. - ACTION
Contact your HP support representative with the
error reported.
- 1878
- MESSAGE
! NOT RESTORED: ACCOUNT NOT SPECIFIED FOR CREATOR NAME OF HFS FILE. - CAUSE
The account portion of the CREATE= option was not specified
for an HFS file. - ACTION
If you want to change the creator of an HFS file,
the full username.accountname must be specified.
- 1901
- MESSAGE
RESTORE IS UNABLE TO RELOAD DIRECTORY ACCOUNTING STRUCTURES. REQUESTED NUMBER OF VOLUMESET DIRECTORY ACCOUNTING STRUCTURES TO RELOAD EXCEEDS THE MAXIMUM NUMBER OF MOUNTABLE VOLUMESETS FOR THIS SYSTEM (S/R 1901) - CAUSE
The number of directory structures to be restored
exceeds the maximum allowed on your system. - ACTION
Restore only maximum allowed volume set structures.
- 1902
- MESSAGE
WARNING: RESTORE ENCOUNTERED UNNECESSARY MEDIA SWITCH. CHECK YOUR SYSLIST AND SUMMARY TO VERIFY RESTORE (S/R 1902) - CAUSE
Unnecessary media switch after last file. - ACTION
Discard redundent last media.
- 1903
- MESSAGE
RESTORE CAN'T TRANSLATE VERSION OF FILE LABEL ON THIS SYSTEM. RUN WITH 'LISTDIR' OPTION AND OBTAIN STORE "MEDIA VERSION" (S/R 1903) - CAUSE
The store subsystem is incompatible with the file
label on media. - ACTION
Update store subsystem.
- 1904
- MESSAGE
! VOLUME SET'S ACCOUNTING STRUCTURE COULD NOT BE REBUILT. (S/R 1904) - CAUSE
Directory services failure. - ACTION
Call your Hewlett-Packard Support Representative.
- 1905
- MESSAGE
! BYTES COULD NOT BE RESTORED FOR PRECEEDING FILE - CAUSE
Data loss for a file being restored. - ACTION
Use duplicate mdia set and retry.
- 1906
- MESSAGE
ADDRESS RANGE NOT STORED STARTS AT OFFSET ! FOR ! BYTES - CAUSE
Disk read error at store time. - ACTION
Use a media set with valid copy of the file.
- 1907
- MESSAGE
RESTORESET OPTION CANNOT BE USED TO READ MPEv TAPES (S/R 1907) - CAUSE
Option RESTORESET is used with MPE V tapes. - ACTION
Exclude RESTORESET option and retry.
- 1908
- MESSAGE
INVOKING CMSTORE TO READ MPE V TAPE - CAUSE
Store detected a compatibility mode tape and is
calling CMSTORE to read it. - ACTION
Information only.
- 1909
- MESSAGE
MEDIA ON SPECIFIED STORESETS ARE NOT FROM THE SAME STORE. (S/R 1909) - CAUSE
The tapes mounted for parallel storeset option were
not created by the same store command. If you used a sequential
storeset option to create the set of tapes then there is a possibility
that some of the tapes were never written and, hence, have a time
stamp that does not match the rest of the tapes. - ACTION
Check that you have a consistent set of store tapes
and exclude restoreset, if redundent.
- 1911
- MESSAGE
WARNING: YOUR DEFAULT FILESET BECOMES '@.@.@' SINCE YOU HAVE OP OR SM CAPABILITY. (S/R 1911) - CAUSE
File set specification was excluded. - ACTION
Abort and use explicit file set if you do not want
the default.
- 1912
- MESSAGE
WARNING: YOUR DEFAULT FILESET BECOMES '@.@' SINCE YOU HAVE AM CAPABILITY. (S/R 1912) - CAUSE
File set specification was excluded. - ACTION
Abort and use explicit file set if you do not want
the default.
- 1913
- MESSAGE
WARNING: YOUR DEFAULT FILESET BECOMES '@' SINCE YOU HAVE NONE OF OP, AM, OR SM CAPABILITY. (S/R 1913) - CAUSE
File set specification was excluded. - ACTION
Abort and use explicit file set if you dont want
the default.
- 1937
- MESSAGE
RESTORE FAILED - CAUSE
RESTORE encountered fatal error. - ACTION
Check the error message beore this one.
- 1938
- MESSAGE
RESTORE FAILED TO CREATE TRANSIENT DATA SPACE TO DUMP MEDIA DIRECTORY: VSM ERROR !. (S/R 1938) - CAUSE
Restore could not get virtual space for its structures. - ACTION
Call your Hewlett-Packard Support Representative.
- 1939
- MESSAGE
RESTORE FAILED TO RELEASE TRANSIENT DATA SPACE FOR MEDIA DIRECTORY: VSM ERROR !. (S/R 1939) - CAUSE
Restore failed to release its work space. - ACTION
Call your Hewlett-Packard Support Representative.
- 1940
- MESSAGE
RESTORE FAILED TO CREATE TRANSIENT DATA SPACE FOR CANDIDATE FILE: VSM ERROR !. (S/R 1940) - CAUSE
Restore failed to allocate space for a candidate
file. - ACTION
Call your Hewlett-Packard Support Representative.
- 1941
- MESSAGE
MEDIA CONTAINS NO MPE VOLUME SET DIRECTORIES, 'DIRECTORY' OPTION CAN NOT RELOAD SYSTEM DIRECTORY - CAUSE
DIRECTORY option specified but no directories on
tape. - ACTION
Check the media set.
- 1942
- MESSAGE
RESTORE IS ASSUMING CURRENT MEDIA IS MEDIA ! FROM SET ! - CAUSE
Reel and set number are unknown due to media label error. - ACTION
Use a duplicate tape set with good labels.
- 1943
- MESSAGE
RESTORE IS ASSUMING CURRENT MEDIA IS MEDIA ! - CAUSE
Reel number is unknown due to media label error. - ACTION
Use a duplicate tape set with good labels.
- 1944
- MESSAGE
RESTORE ENCOUNTERED ERROR GETTING PROCESS LOCAL FILE DESCRIPTOR ADDRESS (PLFD). ERROR: !. (S/R 1944) - CAUSE
RESTORE internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 1945
- MESSAGE
RESTORE ENCOUNTERED ERROR ALLOCATING SECONDARY STORAGE: SSM ERROR: !. (S/R 1945) - CAUSE
RESTORE internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 1946
- MESSAGE
AREA OF DATA LOSS LIES BETWEEN BYTE OFFSET ! AND BYTE OFFSET ! - CAUSE
Media read error caused some data loss. - ACTION
Use duplicate tape set with good media.
- 1948
- MESSAGE
MPE DIRECTORIES FAILED TO RESTORE : - CAUSE
Some directories not restored. - ACTION
Check previous error message about directory not restored.
- 1950
- MESSAGE
FILES FAILED TO RESTORE : - CAUSE
Some files were not restored. - ACTION
Check the restore listing to see which files did
not restore, and any error messages associated with those files.
- 1951
- MESSAGE
FILES NOT ON MEDIA : - CAUSE
Some files found no match on tape. - ACTION
Use the tape set which has these files.
- 1957
- MESSAGE
RESTORE WAS UNABLE TO CREATE USER "!" IN ACCOUNT "!". CIERROR !. (S/R 1957) - CAUSE
Newuser command issued by store failed. - ACTION
Call your Hewlett-Packard Support Representative.
- 1958
- MESSAGE
RESTORE WAS UNABLE TO CREATE ACCOUNT "!". CIERROR !. (S/R 1958) - CAUSE
Newaccount command issued by store failed. - ACTION
Call your Hewlett-Packard Support Representative.
- 1959
- MESSAGE
RESTORE WAS UNABLE TO CREATE GROUP "!" IN ACCOUNT "!".CIERROR !. (S/R 1959) - CAUSE
Newgroup command issued by store failed. - ACTION
Call your Hewlett-Packard Support Representative.
- 1960
- MESSAGE
RESTORE CREATED ACCOUNT "!" - CAUSE
As part of the CREATE option, restore created the specified
account. This account has default capabilities. - ACTION
Information only.
- 1961
- MESSAGE
RESTORE CREATED GROUP "!" IN ACCOUNT "!" - CAUSE
As part of the CREATE option, restore created the specified
group. This group has default capabilities. - ACTION
Information only.
- 1962
- MESSAGE
RESTORE CREATED USER "!" IN ACCOUNT "!" - CAUSE
As part of the CREATE option, restore created the specified
user. This user has default capabilities. - ACTION
Information only.
- 1963
- MESSAGE
RESTORE CREATED ACCOUNT "!" ON VOLUMESET "!" - CAUSE
As part of the CREATE option, restore created the specified
account on the specified volume set. This account has default capabilities. - ACTION
Information only.
- 1964
- MESSAGE
RESTORE WAS UNABLE TO CREATE ACCOUNT "!". ON VOLUMESET "!" CIERROR ! (S/R 1964) - CAUSE
Restore failed to create an account on user volset
for create option. - ACTION
Call your Hewlett-Packard Support Representative.
- 1965
- MESSAGE
RESTORE CREATED GROUP "!" IN ACCOUNT "!" ON VOLUMESET "!" - CAUSE
As part of the CREATE option, restore created the specified
group on the specified volume set. This account has default capabilities. - ACTION
Information only.
- 1966
- MESSAGE
RESTORE WAS UNABLE TO CREATE GROUP "!" IN ACCOUNT "!". ON VOLUMESET "!". CIERROR !. (S/R 1966) - CAUSE
Restore failed to create a group on user volset
for create option. - ACTION
Call your Hewlett-Packard Support Representative.
- 1967
- MESSAGE
RESTORE CREATED GROUP "!" MIRROR IN ACCOUNT "!" FOR VOLUMESET "!" - CAUSE
As part of the CREATE option, restore created the specified
group on the specified mirrored volume set. This account has default
capabilities. - ACTION
Information only.
- 1968
- MESSAGE
RESTORE WAS UNABLE TO CREATE GROUP "!" IN ACCOUNT "!" MIRROR FOR VOLUMESET "!". CIERROR !. (S/R 1968) - CAUSE
Restore failed to create a group mirror on user
volset for create option. - ACTION
Call your Hewlett-Packard Support Representative.
- 1969
- MESSAGE
WARNING: RESTORE WAS UNABLE TO CREATE GROUP "!" IN ACCOUNT "!" MIRROR FOR VOLUMESET "!". CIERROR !. (S/R 1969) - CAUSE
Restore failed to create a group mirror on user
volset for create option. - ACTION
Call your Hewlett-Packard Support Representative.
- 1970
- MESSAGE
RESTORE CREATED ACCOUNT "!" MIRROR FOR VOLUMESET "!". - CAUSE
As part of the CREATE option, restore created the specified
accout on the specified mirrored volume set. This account has default
capabilities. - ACTION
Information only.
- 1971
- MESSAGE
RESTORE WAS UNABLE TO CREATE ACCOUNT "!" MIRROR FOR VOLUMESET "!". CIERROR !. (S/R 1971) - CAUSE
Restore failed to create a account mirror on user
volset for create option. - ACTION
Call your Hewlett-Packard Support Representative.
- 1972
- MESSAGE
STORE MEDIA CREATED ON ! IS ON LDEV ! - CAUSE
Store tape time stamp mismatch with STORESET option. - ACTION
Option check the tape set creation times, exclude STORESET.
- 1974
- MESSAGE
RESTORE WAS UNABLE TO CREATE ACCOUNT "HPSPOOL". (S/R 1974) - CAUSE
The HPSPOOL account does not exist on the system volume
set. - ACTION
Have system manager review the circumstances of
the disappearance of the HPSPOOL account, then do a system reboot,
which will recreate HPSPOOL.
- 1975
- MESSAGE
RESTORE WAS UNABLE TO CREATE GROUP "OUT" IN ACCOUNT "HPSPOOL". (S/R 1975) - CAUSE
The OUT.HPSPOOL group does not exist on the system volume
set. - ACTION
Have system manager review the circumstances of
the disappearance of the OUT.HPSPOOL group, then do a system reboot,
which will recreate HPSPOOL.
- 1976
- MESSAGE
VSTORE OPTION CANNOT BE USED TO READ MPEv MEDIA (S/R 1977) - CAUSE
A MPE/V format tape was mounted for a VSTORE operation. - ACTION
Only Native Mode Store tapes can be verified by
VSTORE.
- 1985
- MESSAGE
ERROR SKIPPING PAST THE SLT (S/R 1985) - CAUSE
RESTORE encountered an error while trying to skip
past the SLT portion of a combined SLT/Store tape. - ACTION
Check the tape drive and reissue the command. If
the problem persists, contact your HP representative.
- 1986
- MESSAGE
NO FILES STORED AFTER THE SLT (S/R 1986) - CAUSE
This SLT is not a combined SLT/Store Tape. - ACTION
This tape can only be used as a system load tape.
- 1987
- MESSAGE
RESTORE ENCOUNTERED AN ERROR ON SLT REEL SWITCH (S/R 1987) - CAUSE
A tape error occurred while RESTORE was switching
to the next reel of a combind SLT/Store set tape. - ACTION
Check the tape drive and reissue the command. If
the problem persists, contact your HP representative.
- 2009
- MESSAGE
RESTORE GOT A WARNING CREATING USER "!" IN ACCOUNT "!". CIWARN ! (S/R 2009) - CAUSE
While creating a the specified new user, RESTORE
got a warning. - ACTION
Information only, the user was still created. Look
up the CI warning for more detail.
- 2014
- MESSAGE
RESTORE WAS UNABLE TO ALLOCATE SPACE TO EXPAND THE MEDIA DIRECTORY AREA: VSM ERROR !(S/R 2014) - CAUSE
RESTORE could not allocate enough scratch space
to expand an older version of store media. - ACTION
Make sure you have enough transient space on your system.
- 2015
- MESSAGE
RESTORE IS ABORTING BECAUSE IT IS UNABLE TO READ A VALID MEDIA DIRECTORY (S/R 2015) - CAUSE
RESTORE was unable to read a valid media directory from
the backup media. - ACTION
If you have additional media in the backup, try
mounting them first.
- 2016
- MESSAGE
RESTORE FAILED TO ALLOCATE SPACE FOR ITS MEDIA DIRECTORY EXTENSION: VSM ERROR ! (S/R 2016) - CAUSE
RESTORE was unable to allocate enough temporary
space to hold its media directory extension information. - ACTION
Make sure you have enough transient space available
on your system.
- 2018
- MESSAGE
RESTORE FAILED TO ALLOCATE SPACE FOR ITS RESTORED UFIDS ARRAY: VSM ERROR ! (S/R 2018) - CAUSE
RESTORE was unable to allocate enough temporary
space to hold its internal UFID array. - ACTION
Make sure there is enough transient space on your
system.
- 2019
- MESSAGE
! NOT RESTORED: FILE WAS MISSED ON MEDIA DUE TO PREVIOUS RESTORE ERROR - CAUSE
Due to media errors, RESTORE was unable to restore
one or more files on the backup. - ACTION
Try to individually restore these files.
- 2020
- MESSAGE
! NOT RESTORED: FILE WAS MISSED ON INTERLEAVED MEDIA DUE TO PREVIOUS RESTORE ERROR - CAUSE
Due to media errors, RESTORE was unable to restore
one or more files on the interleaved backup. - ACTION
Try to individually restore these files.
- 2021
- MESSAGE
! NOT RESTORED: AI LOG DATA FOR FILE WAS MISSED ON MEDIA DUE TO RESTORE ERROR - CAUSE
Due to a previous media error, RESTORE is unable
to locate the required after image data for the specified file. - ACTION
Try to individually restore this file.
- 2022
- MESSAGE
! NOT RESTORED: FILE IS SUSPECTED OF MISSING DATA DUE TO EARLIER RESTORE MEDIA ERROR. - CAUSE
This file never had all of its data restored, probably
due to an earlier media error. - ACTION
Try to individually restore this file.
- 2023
- MESSAGE
! NOT RESTORED: RESTORE FORCED TO TERMINATE WHILE RESTORING FILE - CAUSE
The file is not restored because RESTORE was in
the middle of restoring it when RESTORE was forced to abort due
to either an error or user intervention. - ACTION
Try to restore this file again.
- 2024
- MESSAGE
! NOT RESTORED: RESTORE FORCED TO TERMINATE BEFORE FILE WAS RESTORED - CAUSE
This file was not restored because RESTORE aborted,
due to an error or user intervention, before the file was encountered
on the media.
- 2025
- MESSAGE
! NOT RESTORED: RESTORE DETECTED WRONG DATA RECORD BLOCK NUMBER - CAUSE
The file was not restored because some of the blocks
of file data were missing or out of order. - ACTION
Contact your HP Support Representative.
- 2026
- MESSAGE
! NOT RESTORED: RESTORE DETECTED WRONG LOG RECORD BLOCK NUMBER - CAUSE
The file was not restored because some of the shadow
log records are in wrong sequence. - ACTION
Contact your HP Support Representative.
- 2027
- MESSAGE
! NOT RESTORED: FILE WAS STILL BEING RESTORED WHEN FINAL TRAILER WAS ENCOUNTERED - CAUSE
The file was not restored because the final trailer
was encountered while only partial file was restored. - ACTION
Contact your HP Support Representative.
- 2028
- MESSAGE
! NOT RESTORED: FILE WAS NOT FOUND WHEN FINAL TRAILER WAS ENCOUNTERED - CAUSE
The file was not restored because the final trailer
was encountered before finding the file. - ACTION
Verify you specified the file name correctly. If
the problem still persists contact your HP Support Representative.
- 2029
- MESSAGE
RESTORE FAILED TO ALLOCATE DATA STRUCTURES NEEDED TO APPLY AFTER IMAGE LOG DATA (S/R 2029) - CAUSE
Restore failed because it is unable to allocated
internal data structure required to restore the files. - ACTION
Contact your HP Support Representative.
- 2030
- MESSAGE
! NOT RESTORED: MISSING OLD UFID PREVENTED LOG DATA FROM BEING APPLIED - CAUSE
The file is not restored because internal problem encountered
while applying the shadow log data. - ACTION
Contact your HP Support Representative.
- 2031
- MESSAGE
! NOT RESTORED: UNEXPECTED STORAGE MANAGEMENT ERROR ! WHILE OPENING OLD FILE - CAUSE
The file is not restored because of an internal
error from the Disc Storage Manager. - ACTION
Contact your HP Support Representative.
- 2032
- MESSAGE
! NOT RESTORED: AFTER IMAGE DATA NOT APPLIED - CAUSE
The file is not restored because an internal error
occurred while applying the shadow log data. - ACTION
Contact your HP Support Representative.
- 2033
- MESSAGE
! NOT RESTORED: UNEXPECTED STORAGE MANAGEMENT ERROR ! WHILE MAPPING IN OLD FILE - CAUSE
The file is not restored because of an internal
error from Disc Storage Manager. - ACTION
Contact your HP Support Representative.
- 2034
- MESSAGE
! NOT RESTORED: UNEXPECTED VSM ERROR ! WHILE ADJUSTING EOF AND FILE LIMIT OF OLD FILE - CAUSE
The file is not restored because of an internal
error from Virtual Storage Manager. - ACTION
Contact your HP Support Representative.
- 2035
- MESSAGE
! NOT RESTORED: UNEXPECTED ERROR ENCOUNTERED WHEN UPDATING FILE LABEL EXTENSION OF OLD FILE - CAUSE
The file is not restored because of an unexpected
internal error while updating the file label extension. - ACTION
Contact your HP Support Representative.
- 2036
- MESSAGE
RESTORE GOT UNEXPECTED ERROR ! FROM SUBSYS ! WHEN UPDATING FILE LABEL EXTENSION DATA - CAUSE
Restore failed because of an unexpected error from
Label Management subsystem. - ACTION
Contact your HP Support Representative.
- 2101
- MESSAGE
SPECIFIED DATABASE(S) COULD NOT BE RESTORED. (S/R 2101) - CAUSE
Database not restored. - ACTION
Check previous error messages.
- 2102
- MESSAGE
! NOT RESTORED: DATABASE EXISTS: KEEP SPECIFIED - CAUSE
The specified database already exists on the system,
so RESTORE can not overwrite it, due to the KEEP option being specified. - ACTION
If you really want to overwrite the existing database,
redo the RESTORE command, specifiying the NOKEEP option instead.
- 2110
- MESSAGE
DBSTORE REQUIRES THAT BOTH THE 'HIGH' AND 'LOW' WATER MARK BE SPECIFIED. (S/R 2110) - CAUSE
Only one of high or low option was specified. - ACTION
Specify both high and low options.
- 2111
- MESSAGE
DBSTORE COULDN'T FIND THE CORRECT NUMBER DATA SETS (COUNTING THE ROOT FILE). ! WERE SPECIFIED AND ! WERE FOUND. (S/R 2111) - CAUSE
There were some extra or missing datasets. - ACTION
Check database consistency.
- 2120
- MESSAGE
SENDMAIL TO DBSTORE/DBRESTOR FROM STORE/RESTORE FAILED. (S/R 2120) - CAUSE
Send mail utility failure. - ACTION
Call your Hewlett-Packard Support Representative.
- 2128
- MESSAGE
STORE/RESTORE ENCOUNTERED USER ABORTED IO ON LDEV !. (S/R 2128) - CAUSE
Break/abort or ABORTIO command killed store IO. - ACTION
Redo store if you need to.
- 2129
- MESSAGE
STORE/RESTORE ENCOUNTERED USER ABORTED IO. (S/R 2129) - CAUSE
Break/abort or ABORTIO command killed store IO. - ACTION
Redo store if you need to.
- 2132
- MESSAGE
STORE/RESTORE ENCOUNTERED EXCESSIVE REWIND RETRIES ON LDEV !. EXAMINE CABLE CONNECTIONS OR BUS ADDRESS. (S/R 2132) - CAUSE
Dirty tape heads or bad quality media. - ACTION
Clean tape heads and use new tapes.
- 2133
- MESSAGE
STORE/RESTORE ENCOUNTERED EXCESSIVE REWIND RETRIES ON REMOTE DEVICE FILE "!". (S/R 2133) - CAUSE
Dirty tape heads or bad quality media. - ACTION
Clean tape heads and use new tapes.
- 2134
- MESSAGE
STORE/RESTORE ENCOUNTERED EXCESSIVE REWIND RETRIES ON FILE "!". (S/R 2134) - CAUSE
Dirty tape heads or bad quality media. - ACTION
Clean tape heads and use new tapes.
- 2136
- MESSAGE
STORE/RESTORE ENCOUNTERED CATASTROPHIC IO ERROR FROM SUBSYS !: ERROR. ! (S/R 2136) - CAUSE
Fatal IO error from specified subsystem. - ACTION
Call your Hewlett-Packard Support Representative.
- 2137
- MESSAGE
STORE/RESTORE UNEXPECTEDLY RAN OUT OF FIXED IO BUFFER SPACE (S/R2137) - CAUSE
STORE or RESTORE encountered an unexpected error
in its I/O system. - ACTION
Contact your HP Support Representative.
- 2138
- MESSAGE
STORE/RESTORE UNEXPECTEDLY RAN OUT OF IO BUFFER SPACE (S/R 2138)' ' \CAUSE\ STORE or RESTORE encountered an unexpected
error in its I/O system. - ACTION
Contact your HP Support Representative.
- 2202
- MESSAGE
STORE/RESTORE ENCOUNTERED FAILURE RELEASING FILE LOCKING MECHANISM (LAT). (S/R 2202) - CAUSE
Store could not release global file locking table. - ACTION
Call your Hewlett-Packard Support Representative.
- 2203
- MESSAGE
STORE/RESTORE ENCOUNTERED FAILURE ACTIVATING FILE LOCKING MECHANISM (LAT). (S/R 2203) - CAUSE
Store could not activate global file locking table. - ACTION
Call your Hewlett-Packard Support Representative.
- 2204
- MESSAGE
STORE/RESTORE ENCOUNTERED ERROR READING STORE IPC MESSAGE: IPC ERROR !. (S/R 2204) - CAUSE
System utility failure. - ACTION
Call your Hewlett-Packard Support Representative.
- 2205
- MESSAGE
STORE/RESTORE ENCOUNTERED ERROR SENDING STORE IPC MESSAGE: IPC ERROR !. (S/R 2205) - CAUSE
System utility failure. - ACTION
Call your Hewlett-Packard Support Representative.
- 2206
- MESSAGE
STORE/RESTORE FAILED TO CREATE ITS IPC PORT: IPC ERROR !. (S/R 2206) - CAUSE
System utility failure. - ACTION
Call your Hewlett-Packard Support Representative.
- 2207
- MESSAGE
STORE/RESTORE FAILED TO CREATE ITS TRANSIENT DATA SPACE: VSM ERROR !. (S/R 2207) - CAUSE
Store could not create its work space. - ACTION
Call your Hewlett-Packard Support Representative.
- 2208
- MESSAGE
STORE FAILED TO CREATE ITS SURROGATE PROCESS: PROCESS MANAGEMENT ERROR !. (S/R 2208) - CAUSE
System utility failure. - ACTION
Call your Hewlett-Packard Support Representative.
- 2209
- MESSAGE
STORE/RESTORE OPERATION ABORTED BY USER REQUEST. (S/R 2209) - CAUSE
User aborted store operation. - ACTION
None.
- 2213
- MESSAGE
STORE/RESTORE ENCOUNTERED FOPEN FAILURE ON DEVICE FILE "!". (S/R 2213) - CAUSE
Store aborted or device unavailable. - ACTION
Set a file equation for a correct store device.
- 2215
- MESSAGE
DEVICE FILE "!" REFERENCES STORAGE MEDIA THAT CANNOT BE USED BYSTORE/RESTORE. ONLY 1/2 INCH TAPE ACCESS IS SUPPORTED IN NATIVE MODE. (S/R 2215) - CAUSE
Unsupported device file used. - ACTION
Set a file equation for a correct store device.
- 2216
- MESSAGE
DEVICE FILE "!" REFERENCES LABELED TAPE MEDIA. LABELED TAPE ACCESS IS NOT ALLOWED WITH A '(RE)STORESET'. (S/R 2216) - CAUSE
NMstore found a labelled tape or device file equation. - ACTION
Use unlabelled tapes and file equations.
- 2217
- MESSAGE
DEVICE FILE "!" HAS A DENSITY THAT IS DIFFERENT FROM THE DENSITY SPECIFIED FOR THE FIRST DEVICE OF THE '(RE)STORESET'. ALL TAPE DEVICE FILES MUST HAVE THE SAME DENSITY. (S/R 2217) - CAUSE
The tape density are not identical accross store/restore devices. - ACTION
Use consistent device density for all drives.
- 2218
- MESSAGE
DEVICE FILE "!" REFERENCES STORAGE MEDIA THAT USES A DIFFERENT ACCESS METHOD THAN FIRST DEVICE OF THE '(RE)STORESET'. ALL DEVICE FILES IN A SET MUST USE THE SAME ACCESS METHOD. (S/R 2218) - CAUSE
The access methods are not identical accross store/restore devices. - ACTION
Use consistent access methods for all drives.
- 2219
- MESSAGE
DEVICE FILE "!" REFERENCES STORAGE MEDIA THAT HAS A RECORD SIZE DIFFERENT THAN FIRST DEVICE OF THE '(RE)STORESET'. ALL DEVICE FILES IN A SET MUST USE THE SAME RECORD SIZE. (S/R 2219) - CAUSE
The record sizes are not identical accross store/restore devices. - ACTION
Use consistent record size for all drives.
- 2220
- MESSAGE
DEVICE FILE "!" REFERENCES STORAGE MEDIA WITH A FORMAT DIFFERENT THAN FIRST DEVICE OF THE '(RE)STORESET'. ALL DEVICE FILES IN A SET MUST USE THE SAME FORMAT (EITHER LABELED OR UNLABELED). (S/R 2220) - CAUSE
The media format are not identical accross store/restore devices. - ACTION
Use consistent media format for all drives.
- 2221
- MESSAGE
TAPE DENSITY OF DEVICES IN (RE)STORESET ! DOES NOT MATCH THE DENSITY OF THE DEVICES IN (RE)STORESET !. ALL DENSITIES MUST MATCH. (S/R 2221) - CAUSE
The tape density are not identical accross store/restore devices. - ACTION
Use consistent device density for all drives.
- 2222
- MESSAGE
MEDIA RECORD SIZE OF DEVICE FILES IN (RE)STORESET ! DOES NOT MATCH THE MEDIA RECORD SIZE OF THE DEVICE FILES IN (RE)STORESET !. ALL MEDIA RECORD SIZES MUST BE THE SAME. (S/R 2222) - CAUSE
The record sizes are not identical accross store/restore devices. - ACTION
Use consistent record size for all drives.
- 2223
- MESSAGE
MEDIA FORMAT OF DEVICE FILES IN (RE)STORESET ! DOES NOT MATCH THE MEDIA FORMAT OF THE DEVICE FILES IN (RE)STORESET !. ALL MEDIA MUST BE CREATED IN EITHER LABELED OR UNLABELED FORMAT. (S/R 2223) - CAUSE
The media format are not identical accross store/restore devices. - ACTION
Use consistent media format for all drives.
- 2224
- MESSAGE
DEVICE FILE "!" HAS A INVALID RECORD SIZE OF ! BYTES (MINIMUM SIZE IS 8192 BYTES MAX IS 16384 IN MULTIPLES OF 2048 BYTES). (S/R 2224) - CAUSE
The media record size has invalid length. - ACTION
Set tape file equation to set acceptable size.
- 2225
- MESSAGE
DEVICE FILE "!" HAS A INVALID RECORD SIZE OF ! BYTES (MINIMUM SIZE IS 8192 BYTES, MAX IS 16384 IN MULTIPLES OF 2048 BYTES). DEFAULT OF 16384 BYTES WILL BE USED. (S/R 2225) - CAUSE
The media record size has invalid length. - ACTION
Set tape file equation to set acceptable size.
- 2226
- MESSAGE
VOLUME MANAGEMENT MAXIMUM MOUNTED VOLUME SET COUNT WAS EXCEEDED FOR STORE/RESTORE INTERNAL VOLUME SET LIST STRUCTURES. STORE WAS EITHER PORTED TO AN INCONSISTENT OS OR RESTORE OF VOLUMESETS WAS DONE WITHOUT CORRECT 'FROMVS' VOLUME SETS SPECIFIED. (S/R 2226) - CAUSE
Store internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2227
- MESSAGE
STORE/RESTORE ENCOUNTERED FOPEN FAILURE ON 'SYSLIST' FILE. (S/R 2227) - CAUSE
Syslist file could not be opened by main process. - ACTION
Set a valid file equation for syslist.
- 2228
- MESSAGE
THE SYSLIST FILE IS OPENED OLD PERMANENT WITH DEFAULT OF STDLIST. (S/R 2228) - CAUSE
Syslist open failure, defaulted to stdlist. - ACTION
Set a valid file equation for syslist and retry.
- 2229
- MESSAGE
STORE/RESTORE ENCOUNTERED ERROR CLOSING 'SYSLIST' FILE. (S/R 2229) - CAUSE
Store could not close syslist file. - ACTION
Check the syslist file equation and retry.
- 2230
- MESSAGE
STORE/RESTORE ENCOUNTERED FOPEN FAILURE ON 'OFFLINE' FILE. (S/R 2230) - CAUSE
Offline file could not be opened by main process. - ACTION
Set a valid file equation for offline.
- 2231
- MESSAGE
STORE/RESTORE TERMINATING BECAUSE OF BAD OFFLINE. (S/R 2231) - CAUSE
Offline file could not be opened by store. - ACTION
Set a valid file equation for offline and retry.
- 2232
- MESSAGE
STORE/RESTORE ENCOUNTERED ERROR CLOSING THE 'OFFLINE' FILE. (S/R 2232) - CAUSE
Offline file could not be closed by store. - ACTION
Set a valid file equation for offline and retry.
- 2234
- MESSAGE
STORE/RESTORE ABORTED AS PER USER REQUEST. (S/R 2234) - CAUSE
Break-abort or ABORTIO. - ACTION
None.
- 2235
- MESSAGE
STORE/RESTORE ENCOUNTED ERROR ATTEMPTING TO CREATE THE CMSTORE PROCESS TO READ A MPE V TAPE. (S/R 2235) - CAUSE
System utility failure. - ACTION
Call your Hewlett-Packard Support Representative.
- 2236
- MESSAGE
SPECIFIED COMMAND STRING EXCEEDS THE MAXIMUM ALLOWABLE LENGTH (255 BYTES) THAT THE CMSTORE PROCESS MAY BE INVOKED WITH. (S/R 2236) - CAUSE
Command string is too long. - ACTION
Use indirect file.
- 2242
- MESSAGE
MAX MEDIA BUFFER SIZE IS USED. CURRENT MEDIA RECORD SIZE IS: !. - CAUSE
MAXTAPEBUF option is specified - ACTION
None.
- 2243
- MESSAGE
! NOT RESTORED: UNKNOWN ERROR ENCOUNTERED. (S/R 2243) - CAUSE
A file could not be restored due to unknown error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2244
- MESSAGE
STORE/RESTORE ABORTED DUE TO UNKNOWN ERROR. (S/R 2244) - CAUSE
Unknown fatal error during store/restore. - ACTION
Call your Hewlett-Packard Support Representative.
- 2245
- MESSAGE
A TRAP OCCURED WHILE GENERATING THE STORE/RESTORE FILE LISTING. (S/R 2245) - CAUSE
A trap occured while generating show listing. - ACTION
Call your Hewlett-Packard Support Representative.
- 2246
- MESSAGE
A TRAP OCCURED WHILE ACCESSING THE FILE LISTING OBJECT (S/R 2246) - CAUSE
A trap occured while accessing file list object. - ACTION
Call your Hewlett-Packard Support Representative.
- 2247
- MESSAGE
STORESET CONTAINS DUPLICATE REFERENCES TO A SINGLE LDEV. (S/R 2247) - CAUSE
Same device used more than once in the store command. - ACTION
Retry without using duplicate references to a single
ldev.
- 2252
- MESSAGE
THE DEVICE FILE "!" IS OF UNSUITABLE TYPE FOR THIS STORE ALL OR NONE OF THE DEVICES SHOULD BE DDS FOR A SINGLE COMMAND (S/R 2252) - CAUSE
Both 1/2 inch and DDS devices were specified for
a store command. - ACTION
Make sure all file equations reference the same
type of devices and reissue the store command.
- 2253
- MESSAGE
COULD NOT TURN ON SSM STATUS REPORTING FOR DEVICE "!" (S/R 2253) - CAUSE
An error occurred for the specified DDS device. - ACTION
Check the device and reissue the command. If the
problem persists, contact your HP representative.
- 2254
- MESSAGE
COULD NOT TURN OFF SSM STATUS REPORTING FOR DEVICE "!" (S/R 2254) - CAUSE
An error occurred for the specified DDS device. - ACTION
Check the device and reissue the command. If the
problem persists, contact your HP representative.
- 2255
- MESSAGE
TAPE DEVICE IN (RE)STORESET ! DOES NOT MATCH THE DEVICE IN (RE)STORESET !. EITHER ALL OR NONE OF THE DEVICES SHOULD BE DDS UNITS (S/R 2255) - CAUSE
Both 1/2 inch and DDS devices were specified for
a store command. - ACTION
Make sure all file equations reference the same
type of devices and reissue the store command.
- 2259
- MESSAGE
SET INFORMATION AREA OF DIRECTORY EXTENSION MISSING - CAUSE
No parallel store set information was written to
this tape. - ACTION
Contact your HP representative.
- 2263
- MESSAGE
THE MEDIA ON LDEV ! WAS CREATED WITH DEVICE HARDWARE COMPRESSION. THIS MEDIA CAN NOT BE RESTORED WITH THE CURRENT DRIVE. IF THE DEVICE IS AN 7980XC THEN TURN ON THE DEVICE COMPRESSION FEATURE AND RETRY. (S/R 2263) - CAUSE
You are trying to restore from a hardware compressed
tape with a non-compression drive. - ACTION
If possible, enable compression on your drive. Alternately, restore
this tape with a device capable of reading a hardware-compressed
tape.
- 2265
- MESSAGE
OPEN ERROR WHILE REMAPPING THE BACKUP FILE ON LDEV ! (S/R 2265) - CAUSE
STORE encountered an error while closing the specified magneto-optical
device. - ACTION
Contact your HP representative.
- 2266
- MESSAGE
MAPIN ERROR WHILE REMAPPING THE BACKUP FILE ON LDEV ! (S/R 2266) - CAUSE
STORE encountered an error while closing the specified magneto-optical
device. - ACTION
Contact your HP representative.
- 2267
- MESSAGE
CLOSE ERROR WHILE REMAPPING THE BACKUP FILE ON LDEV ! (S/R 2267) - CAUSE
STORE encountered an error while closing the specified magneto-optical
device. - ACTION
Contact your HP representative.
- 2268
- MESSAGE
THE VOLUME SET NAME ! MOUNTED ON LDEV ! IS GREATER THAN 8 CHARACTERS. ONLY FIRST 8 CHARACTERS WILL BE USED TO CONSTRUCT THE BACKUP FILE NAME (S/R 2268) - CAUSE
Store/Restore will only use the first 8 characters
of the specified name for the magneto-optical backup file name. - ACTION
If this behavior does not produce an acceptable
backup name, abort store, correct the volume set name, and retype the
command.
- 2271
- MESSAGE
STORE FAILED TO CREATE ITS CHILD PROCESS !: PROCESS MANAGEMENT ERROR ! (S/R 2271) - CAUSE
Store/Restore encountered an internal error. - ACTION
Contact your HP representative for further assistance.
- 2272
- MESSAGE
CHILD PROCESS ID ! HAS UNEXPECTEDLY TERMINATED (S/R 2272) - CAUSE
Store/Restore encountered an internal error. - ACTION
Contact your HP representative for further assistance.
- 2280
- MESSAGE
STORE/RESTORE ENCOUNTERED INTERNAL ERROR ! FROM PROCEDURE "!" AT LINE ! OF PROCEDURE "!" (S/R 2280) - CAUSE
STORE failed because of an unexpected internal error. - ACTION
Contact your HP Support Representative and give
the procedure number and the line number where the error occurred.
- 2281
- MESSAGE
STORE/RESTORE ENCOUNTERED UNEXPECTED ERROR ! FROM SUBSYS ! AT LINE ! OF PROCEDURE "!" (S/R 2281) - CAUSE
STORE failed because of an unexpected internal error. - ACTION
Contact your HP Support Representative and give
the procedure number and the line number where the error occurred.
- 2282
- MESSAGE
WARNING: STORE ENCOUNTERED HPFOPEN ERROR ! WHILE CREATING DIRECTORY DISC FILE. (S/R 2282) - CAUSE
STORE encountered an open error while creating media directory
disc file. - ACTION
Information only because restore will use the media directory
from the tape.
- 2283
- MESSAGE
THE SPECIFIED STORE DIRECTORY ("!") DOES NOT MATCH THE MOUNTED BACKUP. (S/R 2283) - CAUSE
The disc media directory specified in the command
line does not match the name of the directory on the tape. - ACTION
Verify the store directory name specified on your
command line and also make sure you have mounted the correct tape.
- 2284
- MESSAGE
CREATED STORE DIRECTORY DISK FILE: "!" - CAUSE
Due to either the ONLINE=END or STOREDIRECTORY options,
STORE created a disk file with the specified name. This disk file
contains the store directory information for the backup just created. - ACTION
Information only.
- 2285
- MESSAGE
CREATED LINK "!" TO STORE DIRECTORY DISK FILE - CAUSE
Due to the STOREDIRECTORY=name option, STORE created a symbolic link to the store
disk directory file. - ACTION
Information only.
- 2286
- MESSAGE
STORE DIRECTORY DISK FILE OCCUPIES ! SECTORS - CAUSE
This is the size, in sectors, of the newly created
store disk directory file. - ACTION
Information only.
- 2288
- MESSAGE
STORE ENCOUNTERED UNEXPECTED ERROR ! FROM SUBSYS ! WHILE WAITING FOR SYNC POINT (S/R 2288) - CAUSE
STORE aborted because it encountered an unexpected error
while trying to sync all the files at sync point. - ACTION
Contact your HP Support Representative.
- 2289
- MESSAGE
WARNING: STORE ENCOUNTERED UNEXPECTED TRAP ! FROM SUBSYS ! WHITE COPYING DATA FOR DIRECTORY DISC FILE. (S/R 2289) - CAUSE
STORE encountered an error while creating disc media directory
file. - ACTION
Information only.
- 2290
- MESSAGE
STORE DISC DIRECTORY FILE WILL NOT BE CREATED, BUT BACKUP IS STILL GOOD. (S/R 2290) - CAUSE
STORE was unable to create a disc media directory
file, but the STORE will continue and complete normally. - ACTION
Information only and no action required.
- 2291
- MESSAGE
WARNING: STORE ENCOUNTERED FILE SYSTEM ERROR WHILE PREPARING THE DISC DIRECTORY FILE EOF (S/R 2291) - CAUSE
STORE encountered an unexpected error while preparing the
disc media directory file. - ACTION
Information only and no action required because
STORE will complete storing all the files.
- 2292
- MESSAGE
WARNING: STORE ENCOUNTERED FILE SYSTEM ERROR WHILE SETTING THE DISC DIRECTORY FILE EOF (S/R 2292) - CAUSE
STORE encountered an error while writing the end
of file marker in the disc media directory file. - ACTION
Information only and no active required because
STORE will complete storing all the files.
- 2293
- MESSAGE
WARNING: STORE ENCOUNTERED FILE SYSTEM ERROR WHILE CLOSING THE DISC DIRECTORY FILE (S/R 2293) - CAUSE
STORE is unable to close the disc media directory
file. - ACTION
Information only and no action required because
STORE will store all the files.
- 2294
- MESSAGE
WARNING: STORE ENCOUNTERED FILE SYSTEM ERROR WHILE CREATING SYMBOLIC LINK ! TO DISC DIRECTORY FILE !. THE SYMBOLIC LINK WILL NOT BE CREATED, BUT THE BACKUP IS STILL GOOD AND THE ORIGINAL DISC DIRECTORY FILE STILL EXISTS. (S/R 2294) - CAUSE
STORE failed to create a symbolic link to the store directory
file specified in your command line. - ACTION
Information only and no action required. Check the
name specified in your command line.
- 2295
- MESSAGE
WARNING: RESTORE ENCOUNTERED UNEXPECTED TRAP ! FROM SUBSYS ! WHILE READING THE DISC DIRECTORY FILE. DISC DIRECTORY FILE WILL NOT BE USED (S/R 2295) - CAUSE
RESTORE is unable to read the disc media directory
file. - ACTION
Information only. RESTORE will complete normally because
it will use the media directory from the tape.
- 2296
- MESSAGE
USER REQUESTED TERMINATION DURING ONLINE SYNC POINT (S/R 2296) - CAUSE
When asked if you wanted to abort the online backup before
the sync point, you replied yes. - ACTION
The backup will abort and will not be a valid backup.
- 2297
- MESSAGE
SERIAL (RE)STORESETS CANNOT BE USED WITH DISC BACKUP FILE "!" (S/R 2297) - CAUSE
Serial (re)storesets cannot be used when storing
to disk files. - ACTION
Use a single disk file or parallel disk files for
your backup.
- 2298
- MESSAGE
DEVICE FILE "!" IS AN UNSUPPORTED FILE TYPE. ONLY STANDARD FILES CAN BE USED FOR DISC BACKUP(S/R 2298) - CAUSE
Only standard, fixed or undefined record files may
be used for store-to-disk. - ACTION
Specify a standard file for the store-to-disk.
- 2299
- MESSAGE
PATH NAME OF DISC DEVICE "!" IS TOO LONG (S/R 2299) - CAUSE
A filename for a store-to-disk file was too long. - ACTION
Specify a short filename for the store-to-disk file.
- 2300
- MESSAGE
STORE/RESTORE WAS UNABLE TO OPEN PERMANENT DISC FILE REFERENCED BY DEVICE "!" (S/R 2300) - CAUSE
STORE is unable to open the necessary disc file
for disc backup. - ACTION
Check the free space in the disc device and try
the STORE command again.
- 2301
- MESSAGE
STORE/RESTORE WAS UNABLE TO OPEN NEXT PERMANENT DISC FILE "!" (S/R 2301) - CAUSE
STORE or RESTORE needed to store or restore files
to another disc file, but was unable to open the specified file. - ACTION
Make sure the existing file exists and that you
have security access to the file.
- 2302
- MESSAGE
RESTORE CANNOT RESTORE FILES FROM PARALLEL SET ! BECAUSE REQUIRED DISC FILE WAS NOT SUPPLIED IN RESTORESET OPTION (S/R 2302) - CAUSE
RESTORE cannot restore files from fewer parallel
disk files than were created during the backup. - ACTION
Specify all parallel disk files created during the
backup with the ;RESTORESET option.
- 2303
- MESSAGE
REMOTE FILE "!" IS NOT SUPPORTED FOR DISC BACKUP (S/R 2303) - CAUSE
You cannot specify a remote disc device or a remote
file for disc backup. - ACTION
Check your file equation and try the STORE command again.
- 2321
- MESSAGE
A MEDIA IS CURRENTLY MOUNTED ON THE MO LDEV ! (S/R 2321) - CAUSE
The magneto-optical drive Store/Restore wanted to
use is already occupied. - ACTION
Removed the media from the specified ldev and retype
the command.
- 2332
- MESSAGE
ALLOCATE SERVICE OF MEDIA MANAGER ENCOUNTERED ERROR (S/R 2332) - CAUSE
Store/Restore could not allocate a magneto-optical
device. - ACTION
Check the magneto-optical hardware and reissue the command.
If the problem persists, contact your HP representative.
- 2352
- MESSAGE
MOUNT BY NAME REQUEST GOT A REPLY WITH UNWANTED MEDIA NAME STORE REQUESTED MEDIA NAME: ! MEDIA MANAGER MOUNTED NAME: ! THE MEDIA MANAGER MOUNTED INCORRECT MEDIA ON LDEV ! (S/R 2352) - CAUSE
The incorrect media is mounted for Store/Restore. - ACTION
Check the mounted media and/or the Store command
and make sure they match each other. Retype the command.
- 2370
- MESSAGE
THE BACKUP NAME SPECIFIED ALREADY EXISTS IN THE MO BOX CONTAINING LDEV !. PLEASE RETRY THE BACKUP COMMAND WITH A NEW NAME. IF YOU OMIT THE NAME OPTION THEN BACKUP WILL GENERATE A UNIQUE NAME FOR YOUR OPERATION IN BKtime.Ddate.system_name FORMAT. (S/R 2370) - CAUSE
The name specified for a backup already exists in
the magneto-optical device. - ACTION
Either specific a non-existant name, or let Store
assign one for you.
- 2373
- MESSAGE
STORE/RESTORE GOT UNEXPECTED ERROR ! FROM SUBSYS ! WHILE ATTEMPTING TO GET THE MEDIA MANAGER PORT (S/R 2373) - CAUSE
An internal error occurred while initializing the
Magneto Optical device. - ACTION
Contact your HP Support Representative.
- 2374
- MESSAGE
STORE/RESTORE FAILED TO GET MEDIA MANAGER PORT. MEDIA MANAGER DOES NOT APPEAR TO BE INSTALLED. (S/R 2374) - CAUSE
Your system does not have a Magneto Optical media manager
software installed. - ACTION
Check your installation process. Otherwise contact
your HP Support Representative.
- 2401
- MESSAGE
STORE SURROGATE ENCOUNTERED FOPEN FAILURE ON 'SYSLIST' FILE. (S/R 2401) - CAUSE
Surrogate failed to open the syslist file. - ACTION
Check the syslist file equation and retry.
- 2402
- MESSAGE
STORE SURROGATE ENCOUNTERED FOPEN FAILURE ON 'OFFLINE' FILE (S/R 2402) - CAUSE
Surrogate failed to open the offline file. - ACTION
Check the offline file equation and retry.
- 2413
- MESSAGE
STORE SURROGATE FAILED TO SEND IPC MESSAGE: IPC ERROR !. (S/R 2413) - CAUSE
System utility failure. - ACTION
Call your Hewlett-Packard Support Representative.
- 2417
- MESSAGE
STORE SURROGATE ENCOUNTERED ERROR READING STORE IPC MESSAGE: IPC ERROR !. (S/R 2417) - CAUSE
System utility failure. - ACTION
Call your Hewlett-Packard Support Representative.
- 2426
- MESSAGE
STORE SURROGATE CAUGHT BAD ESCAPE FROM SUBSYS ! WITH ERROR !. (S/R 2426) - CAUSE
Store internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2427
- MESSAGE
FILE LABEL EXTENSIONS FOR FILE ! ARE TOO BIG TO BE STORED IN ONE MEDIA RECORD. (S/R 2427) - CAUSE
The record size of the store device are too small
to hold all the file extension information. - ACTION
If possible, increase the record size of the output
device and reissue the store command.
- 2428
- MESSAGE
STORE SURROGATE ENCOUNTERED FATAL SHADOW ERROR ! (S/R 2428) - CAUSE
The surrogate process encountered a fatal error
from the SHADOW subsystem. - ACTION
Report the error to your HP Support Representative.
- 2501
- MESSAGE
STMGT RETURNED UNKNOWN ERROR. (S/R 2501) - CAUSE
Store could not decipher storage management error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2502
- MESSAGE
STMGT WAS UNABLE TO CLOSE FILE CORRECTLY. VOLUME MANAGEMENT FAILED TO INCREMENT FILE OPEN COUNT (FOCT). (S/R 2502) - CAUSE
Store internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2503
- MESSAGE
STMGT CANNOT OPEN THE FILE, LABEL IS INVALID, DEALLOCATED OR VOLUME WHERE LABEL RESIDES IS SPUN DOWN. (S/R 2503) - CAUSE
Store internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2504
- MESSAGE
STMGT CANNOT OBTAIN SUFFICENT RESOURCES (GUFD/VSOD) TO OPEN THE FILE. (S/R 2504) - CAUSE
System internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2505
- MESSAGE
STMGT VIEW OF THIS FILE IS OUT OF SYNC. (S/R 2505) - CAUSE
System internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2506
- MESSAGE
STMGT COULD NOT MAP IN FILE BECAUSE FILE LIMIT IS 0. (S/R 2506) - CAUSE
Store internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2507
- MESSAGE
STMGT COULD NOT MAP IN FILE BECAUSE IT IS IN USE FOR WRITING. (S/R 2507) - CAUSE
Some user has the file open for write. - ACTION
Retry when the file is not in use.
- 2508
- MESSAGE
STMGT COULD NOT MAP IN FILE (VOLUME(S) CONTAINING EXTENTS OF THE FILE MAY NOT BE MOUNTED). (S/R 2508) - CAUSE
Some unmounted volumes in the volume set. - ACTION
Mount all volumes in the volume set and retry.
- 2509
- MESSAGE
STMGT COULD NOT FILE VOLUME ID OF FILE ON THE SYSTEM (VOLUME MAY NOT BE MOUNTED). (S/R 2509) - CAUSE
Some unmounted volumes in the volume set. - ACTION
Mount all volumes in the volume set and retry.
- 2510
- MESSAGE
STMGT COULD NOT REMAP FILE TO NEW ACCESS RIGHTS. (S/R 2510) - CAUSE
Store internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2511
- MESSAGE
STMGT WAS UNABLE TO CLOSE FILE CORRECTLY. VOLUME MANAGEMENT FAILED TO DECREMENT FILE OPEN COUNT (FOCT). (S/R 2511) - CAUSE
System internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2512
- MESSAGE
STMGT WAS UNABLE TO CLOSE ROOT DIRECTORY NODE. (S/R 2512) - CAUSE
System internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2513
- MESSAGE
STMGT WAS UNABLE TO CLOSE ACCOUNT DIRECTORY NODE. (S/R 2513) - CAUSE
System internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2514
- MESSAGE
STMGT WAS UNABLE TO CLOSE GROUP DIRECTORY NODE. (S/R 2514) - CAUSE
System internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2515
- MESSAGE
STMGT RETURNED BAD STATUS FROM SUBSYSTEM !, ERROR !. (S/R 2515) - CAUSE
System internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2516
- MESSAGE
STMGT WAS UNABLE TO ACCESS GLOBAL UNIQUE FILE DESCRIPTOR (GUFD) OF FILE. (S/R 2516) - CAUSE
System internal error. - ACTION
Call your Hewlett-Packard Support Representative.
- 2601
- MESSAGE
GENFPARSE RETURNED UNKNOWN ERROR (S/R 2601) - CAUSE
GENFPARSE returned an unknown error to STORE/RESTORE
(SUBSYS = FILE SYSTEM). - ACTION
File a service request with Hewlett-Packard.
- 2602
- MESSAGE
GENFPARSE RETURNED STATUS FROM SUBSYSTEM !, ERROR ! (S/R 2602) - CAUSE
GENFPARSE returned an unknown error to STORE/RESTORE
(SUBSYS = UNKNOWN). - ACTION
File a service request with Hewlett-Packard.
- 2603
- MESSAGE
INVALID CHARACTER FOUND IN THE FILESET SPECIFIED (S/R 2603) - CAUSE
An invalid character was detected in the specified
fileset. - ACTION
Correct the fileset name.
- 2604
- MESSAGE
THE FILE SET PATH SPECIFIED IS TOO LONG (S/R 2604) - CAUSE
The specified file set path combined with the current working
directory exceeds the maximum allowed path length. - ACTION
Copy the file into a shorter length directory and
then store.
- 2605
- MESSAGE
THE FILE SET USES MALFORMED CHARACTER CLASS (S/R 2605) - CAUSE
The file set uses malformed character class. - ACTION
Correct the fileset name.
- 2608
- MESSAGE
A FILE NAME IN SPECIFIED PATH BEGINS WITH A "-" (S/R 2608) - CAUSE
A file name in specified path begins with a "-". - ACTION
Correct the fileset name.
- 2609
- MESSAGE
A FILE SET SPECIFIED BEGINS WITH A "//" (S/R 2609) - CAUSE
A file set specified begins with a "//". - ACTION
Correct the fileset name.
- 2610
- MESSAGE
A NEGATIVE FILE SET CONTAINS ".." (S/R 2610) - CAUSE
A negative HFS file set containing ".." was found
following an MPE file set. - ACTION
Either make the right hand side MPE syntax or make
the left hand side HFS syntax.
- 2611
- MESSAGE
A NEGATIVE HFS FILE SET FOUND AFTER MPE FILESET. IF THE LEFT HAND SIDE OF THE "fileset1 - fileset2" IS AN MPE SET THEN THE RIGHT HAND SIDE MUST BE AN MPE FILESET. NOTE THAT AN UNQUALIFIED FILESET IS ALSO CONSIDERED AN HFS SET IF CURRENT WORKING DIRECTORY IS NOT A GROUP. (S/R 2611) - CAUSE
A negative HFS file set was found following an MPE
file set. - ACTION
Either make the right hand side MPE syntax or make
the left hand side HFS syntax.
- 2612
- MESSAGE
THE HFS DOMAIN FILESET IS NOT ALLOWED WITH THE RENAME OPTION (S/R 2612) - CAUSE
An attempt was made to use an HFS domain file set
with the RENAME option. - ACTION
Remove the RENAME option.
- 2613
- MESSAGE
A NAME COMPONENT IN THE PATH SPECIFIED EXCEEDS THE MAXIMUM ALLOWED NAME LENGTH (S/R 2613) - CAUSE
A HFS syntax filename component was too long. - ACTION
Check the spelling and syntax of your input and
retype the STORE command.
- 2651
- MESSAGE
HFS FILE SCANNER ERROR SUBSYSTEM !, ERROR ! (S/R 2651) - CAUSE
An unknown error was retured from the HFS scanner. - ACTION
File a service request with Hewlett-Packard.
- 2652
- MESSAGE
! NOT STORED: PATH DOES NOT EXIST - CAUSE
The specified path does not exist. - ACTION
Check the path name and retry.
- 2651
- MESSAGE
HFS FILE SCANNER ERROR SUBSYSTEM !, ERROR ! (S/R 2651) - CAUSE
An unknown error was retured from the HFS scanner. - ACTION
File a service request with Hewlett-Packard.
- 2652
- MESSAGE
! NOT STORED: PATH DOES NOT EXIST - CAUSE
The specified path does not exist. - ACTION
Check the path name and retry.
- 2653
- MESSAGE
! NOT STORED: SPECIFIED DIRECTORY TOO DEEP - CAUSE
The specified directory is too many levels deep. - ACTION
Copy the files into a shallower level directory
and then store.
- 2654
- MESSAGE
! NOT STORED: UNKNOWN SCAN ERROR - CAUSE
An unknown error was retured from the HFS scanner. - ACTION
File a service request with Hewlett-Packard.
- 2655
- MESSAGE
! NOT STORED: SECURITY VIOLATION - CAUSE
A security violation was encountered. - ACTION
Request that your system manager store the file.
- 2656
- MESSAGE
! NOT STORED: NO TRAVERSE ACCESS - CAUSE
The operation requires that the user have Traverse Directory
(TD) access. - ACTION
Request your system manager to store the file.
- 2657
- MESSAGE
! NOT STORED: EXCLUSIVE OPEN VIOLATION - CAUSE
An exclusive file open violation occurred. - ACTION
Wait for the file to be closed, then store.
- 2658
- MESSAGE
! NOT CONSIDERED: PATH NAME TOO LONG - CAUSE
The specified path name is too long - ACTION
Copy the file into a shorter length directory and
then store.
- 2660
- MESSAGE
! NOT STORED: SCANNER FAILED TO HPFOPEN NODE - CAUSE
The scanner failed to HPFOPEN the node. - ACTION
File a service request with Hewlett-Packard.
- 2661
- MESSAGE
! NOT STORED: PATH NAME TOO LONG - CAUSE
The specified path name is too long. - ACTION
Copy the file into a shorter length directory and
then store.
- 2662
- MESSAGE
! SKIPPED: TRANSPORT TO MPE/XL INFORMATION FILE - CAUSE
The file HFSMAP._HFSGROUP._HFSACCT was not restored. - ACTION
Information only.
- 2663
- MESSAGE
! NOT STORED: PATH NAME CONTAINED TOO MANY SYMBOLIC LINKS POSSIBLE CIRCULAR DEFINITION I.E. LINKA -> LINKB, LINKB -> LINKA - CAUSE
The maximum number of symbolic link traversals was exceeded.
This could indicate a circular definition. - ACTION
Check the syntax of the input file set and reissue
the store command.
- 2701
- MESSAGE
THE UNDERBAR CHARACTER IS NOT ALLOWED WITH MPE SYNTAX CFILE NAME (S/R 2701) - CAUSE
The underbar character (_) was specified as part
of the file name in an MPE syntax entry. - ACTION
Remove the underbar character or use HFS syntax.
- 2702
- MESSAGE
THE UNDERBAR CHARACTER IS NOT ALLOWED WITH MPE SYNTAX GROUP NAME (S/R 2702) - CAUSE
The underbar character (_) was specified as part
of the group name in an MPE syntax entry. - ACTION
Remove the underbar character or use HFS syntax.
- 2703
- MESSAGE
THE UNDERBAR CHARACTER IS NOT ALLOWED WITH MPE SYNTAX ACCOUNT NAME (S/R 2703) - CAUSE
The underbar character (_) was specified as part
of the account name in an MPE syntax entry. - ACTION
Remove the underbar character or use HFS syntax.
- 2704
- MESSAGE
STORE/RESTORE FAILED TO GET CURRENT WORKING DIRECTORY FROM HIERARCHIAL DIRECTORY SUBSYSTEM. LOGON GROUP ASSUMED AS THE CURRENT WORKING DIRECTORY (S/R 2704) - CAUSE
STORE/RESTORE failed to get the current working directory
from the hierarchial directory subsystem. - ACTION
File a service request with Hewlett-Packard.
- 2705
- MESSAGE
! NOT RESTORED: COULD NOT CREATE PATH - CAUSE
The file was not stored because the path could not
be created. - ACTION
Check to ensure that you have create directory capabilities.
- 2706
- MESSAGE
FAILED TO CREATE TRANSPORT MAPPING FILE (S/R 2706) - CAUSE
The transport mapping file was not created due to
the lack of available disk space. - ACTION
Check for available disk space. If that is not a
problem, then file a service request with Hewlett-Packard.
- 2707
- MESSAGE
RESTORE FAILED TO LINK IN THE OBJECT, ENCOUNTERED ERROR ! FROM HPDIR SUBSYSTEM (S/R 2707) - CAUSE
RESTORE failed to link in the object. - ACTION
File a service request with Hewlett-Packard.
- 2708
- MESSAGE
! NOT RESTORED: CREATE=PATH OPTION NEEDED - CAUSE
The file was not restored because the CREATE=PATH option
is needed to create the missing portions of the file path. - ACTION
Specify the CREATE=PATH option.
- 2709
- MESSAGE
STORE/RESTORE ENCOUNTERED PASCAL LIBRARY ERROR !, AT CODE OFFSET ! (S/R 2709) - CAUSE
A Pascal Library error was encountered. - ACTION
File a service request with Hewlett-Packard.
- 2710
- MESSAGE
! NOT STORED: ACD TRANSLATION ERROR (S/R 2710) - CAUSE
An ACD translation error was encountered. - ACTION
File a service request with Hewlett-Packard.
- 2711
- MESSAGE
! NOT RESTORED: PATH IS NOT A DIRECTORY (S/R 2711) - CAUSE
The specified path is not a directory. - ACTION
Remove the existing file conflicting with the incoming
path and retry.
- 2712
- MESSAGE
RESTORE ENCOUNTERED ERROR ! FROM SUBSYS ! WHILE CREATING USER/GROUP DATABASE. THE PXUTIL.PUB.SYS UTILITY SHOULD BE RUN BY THE SYSTEM MANAGER TO RECREATE THE DATABASES. - CAUSE
An error was encountered while creating the User/Group Database. - ACTION
The system manager should run the PXUTIL.PUB.SYS utility
to recreate the databases. Also you should file a service request
with Hewlett-Packard.
- 2713
- MESSAGE
THE BACKWARD TRANSPORT NAMES GENERATED FOR HIERARCHIAL DOMAIN FILES WRAPPED AROUND. RESTORING THIS MEDIA ON MPE XL 4.0 AND BEFORE MAY NOT RESTORE ALL OF THE HFS DOMAIN FILES. (S/R 2713) - CAUSE
The backward transport names generated for hierarchial domain
files wrapped around. - ACTION
Do not use this media for backward migration to
pre-HFS systems.
- 2714
- MESSAGE
! NOT RESTORED: ERROR WAS ENCOUNTERED RESTORING ACD/OWNER OF THIS DIRECTORY. (S/R 2714) - CAUSE
An error was encountered restoring the ACD/Owner
of this directory. - ACTION
Check capabilities to alter the existing directory.
If the capabilities are appropriate, then file a service request with
Hewlett-Packard.
- 2715
- MESSAGE
THE UDERBAR CHARACTER IS NOT ALLOWED WITH MPE SYNTAX LOCKWORD. (S/R 2715) - CAUSE
An attempt was made to use the underbar character
(_) as part of the lockword. - ACTION
Remove the underbar character from the lockword.
- 2716
- MESSAGE
! NOT RESTORED: SECURITY VIOLATION. FAILED TO RESET OWNER OF THIS DIRECTORY ON DISK (S/R 2716) - CAUSE
A security violation was encountered while attempting
to reset the owner of the directory. - ACTION
Check capabilities to alter the existing directory.
If the capabilities are appropriate, then file a service request with
Hewlett-Packard.
- 2717
- MESSAGE
! NOT RESTORED: SECURITY VIOLATION. FAILED TO RESET ACD OF THIS DIRECTORY ON DISK (S/R 2717) - CAUSE
A security violation was encountered while attempting
to reset the ACD of the directory. - ACTION
Check capabilities to alter the existing directory.
If the capabilities are appropriate, then file a service request with
Hewlett-Packard.
- 2718
- MESSAGE
! WILL BE RESTORED WITH ORIGINAL CREATOR. SECURITY VIOLATION WHILE ATTEMPTING TO ALTER CREATOR - CAUSE
The UID for this file could not be altered. - ACTION
Check capabilities to alter the creator. If the
capabilities are appropriate, then file a service request with Hewlett-Packard.
- 2719
- MESSAGE
NAME BUFFER OVERFLOWED WHILE TRYNIG TO DISPLAY A FILE MESSAGE. (S/R 2719). - CAUSE
The HFS syntax name is too long to be displayed. - ACTION
None - the name of this file will not be displayed.
- 2720
- MESSAGE
! NOT RESTORED: SYSTEM RESTRICTION ON SAVE FILE - CAUSE
The file could not be restored because of implementation. Possiblities
include trying to save "." or ".." to the directory. - ACTION
Contact your HP representative.
- 2732
- MESSAGE
'NODECOMPRESS' CANNOT BE USED WITH THE 'LISTDIR' OPTION (S/R 2732) - CAUSE
The NODECOMPRESS and LISTDIR options cannot be used
together. - ACTION
Remove one of the two options and retype the command.
- 2733
- MESSAGE
WARNING: 'NODECOMPRESS' OPTION REDUNDANTLY SPECIFIED (S/R 2733) - CAUSE
The NODECOMPRESS option was entered more than once. - ACTION
Information only.
- 2734
- MESSAGE
VSTORE WAS UNABLE TO ALLOCATE SUFFICIENT MEMORY RESOURCES TO CARRY OUT DECOMPRESSION VALIDATION (S/R 2734) - CAUSE
Due to memory pressure, VSTORE failed to allocate necessary
memory. - ACTION
Attempt to free up some memory on the system and reissue
the command.
- 2744
- MESSAGE
WARNING: 'STATISTICS' OPTION HAS BEEN REDUNDANTLY SPECIFIED (S/R 2744) - CAUSE
The STATISTICS option was specified more than once. - ACTION
Information only.
- 2745
- MESSAGE
'STATISTICS' OPTION CANNOT BE USED WITH 'TRANSPORT' TO MPEv. (S/R 2745) - CAUSE
The STATISTICS option cannot be used when creating MPEv
media. - ACTION
Remove one of the options and re-run the command.
- 2801
- MESSAGE
! DATABASE NOT STORED: ERROR RETRIEVING FILE LIST OF IMAGE DATABASE - CAUSE
STORE cannot store the specified IMAGE database because
it could not determine what files were in the database. - ACTION
Make sure that the root file of your database is
not corrupted. You can also specify the ;PARTIALDB option to force
STORE to store all available database files.
- 2802
- MESSAGE
! DATABASE NOT STORED: ERROR RETRIEVING FILE LIST OF ALLBASE DATABASE - CAUSE
STORE cannot store the specified ALLBASE database because
it could not determine what files were in the database. - ACTION
Make sure that the root file of your database is
not corrupted. You can also specify the ;PARTIALDB option to force
STORE to store all available database files.
- 2807
- MESSAGE
! NOT STORED: FILE IS PART OF AN IMAGE DATABASE AND ROOT IS NOT SPECIFIED. - CAUSE
Your fileset list includes files which belong to
an image database whose root file is not specified. - ACTION
Specify the root file name in the fileset list or
use ;PARTIALDB option to force STORE to store all available database
files.
- 2808
- MESSAGE
! NOT STORED: FILE IS PART OF AN ALLBASE DB ENVIRONMENT AND DBCON IS NOT SPECIFIED. - CAUSE
Your fileset list includes files which belong to
a ALLBASE database whose DBCON file is not specified in the fileset. - ACTION
Include the DBCON file in your fileset list or use ;PARTIALDB
option to force STORE to store all available database files.
- 2811
- MESSAGE
! ALLBASE DATABASE FAILED TO COMPLETE PROPERLY - CAUSE
An error occurred while storing an ALLBASE database during
a 7x24 True-Online backup. - ACTION
Contact your HP Support Representative.
- 2812
- MESSAGE
ERROR QUIESCING IMAGE DATABASE ! , STATUS = ! - CAUSE
STORE encountered error during quiesceing (wait
for database transactions to complete) the IMAGE database. - ACTION
Contact your HP Support Representative.
- 2813
- MESSAGE
ERROR QUIESCING ALLBASE DATABASE ! , STATUS = ! - CAUSE
STORE encountered error while quiesceing (wait for database
transactions to complete) the ALLBASE database. - ACTION
Contact your HP Support Representative.
- 2816
- MESSAGE
! ERROR CHECKING QUIESCE STATUS FOR IMAGE DATABASE - CAUSE
STORE encountered error while quiesceing (wait for database
transactions to complete) the IMAGE database. - ACTION
Contact your HP Support Representative.
- 2817
- MESSAGE
! ERROR CHECKING QUIESCE STATUS FOR ALLBASE DATABASE - CAUSE
STORE encountered error while quiesceing (wait for database
transactions to complete) the ALLBASE database. - ACTION
Contact your HP Support Representative.
- 2820
- MESSAGE
! ERROR UNQUIESCING IMAGE DATABASE - CAUSE
STORE encountered while unquiescing (allow new transactions
to start) the IMAGE database. - ACTION
Call your HP Support Representative.
- 2821
- MESSAGE
! ERROR UNQUIESCING ALLBASE DATABASE - CAUSE
STORE encountered an error while unquiescing (allow new
transactions tostart) the ALLBASE database. - ACTION
Contact your HP Support Representative.
- 2824
- MESSAGE
! DATABASE NOT STORED: FILE MISSING FROM IMAGE DATABASE - CAUSE
All of the files in the TurboIMAGE database could
not be found on the system. - ACTION
STORE will not store an incomplete database, by
default. Make sure all database files exist on the system. If you need
to store an incomplete database, use the ;PARTIALDB option.
- 2825
- MESSAGE
! DATABASE NOT STORED: FILE MISSING FROM ALLBASE DATABASE - CAUSE
All of the files in the ALLBASE database could not
be found on the system. - ACTION
STORE will not store an incomplete database, by
default. Make sure all database files exist on the system. If you need
to store an incomplete database, use the ;PARTIALDB option.
- 2830
- MESSAGE
! NOT RESTORED: A FILE OF THIS APPLICATION SET WAS PURGED DURING STORE - CAUSE
When the database was stored, one of more of the
files in the database was purged before the sync point. Since RESTORE
cannot restore the entire database, it will not restore any of the
files in the database. - ACTION
If you really need to restore all of the files in
the database, even though the database will be incomplete, specify
the ;PARTIALDB option and restore the files again.
- 3000
- MESSAGE
! NOT STORED: UNEXPECTED TRAP OCCURRED WHILE ATTACHING FILE - CAUSE
Unexpected error occurred while adding this file
to the media directory list. - ACTION
Make sure the file exists and try the STORE command again.
- 3001
- MESSAGE
WARNING: UNEXPECTED TRAP OCCURRED WHILE DETACHING FILE ! (S/R 3001) - CAUSE
Unexpected error occurred while disabling the logging
and releasing the resources for this file. - ACTION
Do a VSTORE to verify that this file was stored
properly. Otherwise try storing the file again.
- 3002
- MESSAGE
SHADOW WAS UNABLE TO INITIALIZE THE UFID HASH/CACHE SEMAPHORE (S/R 3002) - CAUSE
Internal error occurred while initializing the logging facility
for the store. - ACTION
Report the error received to your HP Support Representative.
- 3003
- MESSAGE
AN UNEXPECTED TRAP OCCURRED WHILE CREATING THE SHADOW ENVIRONMENT (S/R 3003) - CAUSE
An internal error occurred while creating the logging facility
for the store. - ACTION
Report the error received to your HP Support Representative.
- 3004
- MESSAGE
AN UNEXPECTED TRAP OCCURRED WHILE INSERTING THE SHADOW ENVIRONMENT INTO THE GLOBAL SHADOW CONTROL BLOCK (S/R 3004) - CAUSE
An internal error occurred while creating the logging facility
for the store. - ACTION
Report the error received to your HP Support Representative.
- 3005
- MESSAGE
SHADOW WAS UNABLE TO GET ITS KSO WHILE RELEASING THE SHADOW ENVIRONMENT (S/R 3005) - CAUSE
An internal error occurred while creating the logging facility
for the STORE. - ACTION
Report the error received to your HP Support Representative.
- 3006
- MESSAGE
SHADOW WAS UNABLE TO LOCK THE GLOBAL CONTROL BLOCK WHILE RELEASING THE SHADOW ENVIRONMENT (S/R 3006) - CAUSE
An internal error occurred while creating the logging facility
for the store. - ACTION
Report the error received to your HP Support Representative.
- 3007
- MESSAGE
! NOT STORED: FILE SEMAPHORE NOT OBTAINED DURING ATTACH - CAUSE
Shadow logging failed for this file. - ACTION
Close the file and try storing the file again.
- 3008
- MESSAGE
! NOT STORED: FILE CLOSE FAILED DURING ATTACH - CAUSE
An internal error occurred during shadow logging. - ACTION
Try storing the file again.
- 3009
- MESSAGE
! NOT STORED: UNEXPECTED FATAL SHADOW ERROR ! ENCOUNTERED - CAUSE
An unexpected internal error occurred while logging
the file. - ACTION
Try storing the file again and report this error
to your HP Support Representative.
- 3019
- MESSAGE
SHADOW WAS UNABLE TO GET A SEMAPHORE FOR THE GLOBAL SHADOW ENVIRONMENT (S/R 3009) - CAUSE
An internal error occurred during shadow logging. - ACTION
Report this error to your HP Support Representative.
- 3020
- MESSAGE
SHADOW GET AI LOGGING INFO ROUTINE ENCOUNTERED ERROR (S/R 3020) - CAUSE
An internal error occurred while shadow logging. - ACTION
Report this error to your HP Support Representative.
- 3021
- MESSAGE
SHADOW ENABLE AI LOGGING ROUTINE ENCOUNTERED ERROR (S/R 3021) - CAUSE
An internal error occurred while shadow logging. - ACTION
Report this error to your HP Support Representative.
- 3022
- MESSAGE
SHADOW NOTIFY SYNC POINT ROUTINE ENCOUNTERED ERROR (S/R 3022) - CAUSE
An internal error occurred while shadow logging. - ACTION
Report this error to your HP Support Representative.
- 3023
- MESSAGE
SHADOW ENABLE STORE RECOVERY ROUTINE ENCOUNTERED ERROR (S/R 3023) - CAUSE
An internal error occurred while shadow logging. - ACTION
Report this error to your HP Support Representative.
- 3025
- MESSAGE
AN ERROR TRAP OCCURRED WHILE GETTING IMAGE OF THE USER MAPPED FILE AT THE SYNC POINT - CAUSE
An internal error occurred while shadow logging
this file. - ACTION
Try storing the file again.
- 3026
- MESSAGE
! WARNING: LOG DATA WRITTEN FOR FILE MAY NOT BE THE MOST RECENT - CAUSE
This cm file was open during sync point. So the
copy of the file stored may not be a very recent copy. The copy
was taken either at the last close or FCONTROL 6. - ACTION
Close the file and try storing the file again.
|