Use the >SHOW command to display the translation table on your
terminal screen or have it printed on the system printer.
To display the standard ASCII translation table on the terminal
screen, use the TABLE parameter of the >SHOW command. The translation table follows the standard 128-character
ASCII sequence. It shows the ordinal value for each character. For
example, the numeric value for F is 70 (decimal). To generate the
ASCII translation table, enter the following commands:
 |
:SORT
HP32214A.01.00 SORT/3000 WED, JUN 3, 1987, 9:20 AM
© HEWLETT-PACKARD CO. 1986
>DATA IS ASCII, SEQUENCE IS ASCII
>SHOW TABLE
TABLE OF ORDINAL VALUE ASSIGNED TO EACH CHARACTER.
! 0 ! 1 ! 2 ! 3 ! 4 ! 5 ! 6 ! 7 ! 8 ! 9
----+------+------+------+------+------+------+------+------+------+------
0 ! 0 ! 1 ! 2 ! 3 ! 4 ! 5 ! 6 ! 7 ! 8 ! 9 !
1 ! 10 ! 11 ! 12 ! 13 ! 14 ! 15 ! 16 ! 17 ! 18 ! 19 !
2 ! 20 ! 21 ! 22 ! 23 ! 24 ! 25 ! 26 ! 27 ! 28 ! 29 !
3 ! 30 ! 31 !sp=32 !!= 33 !"= 34 !#= 35 !$= 36 !%= 36 !&= 38 !'= 39 !
4 !(= 40 !)= 41 !*= 42 !+= 43 !,= 44 !-= 45 !.= 46 !/= 47 !0= 48 !1= 49 !
5 !2= 50 !3= 51 !4= 52 !5= 53 !6= 54 !7= 55 !8= 56 !9= 57 !:= 58 !;= 59 !
6 !<= 60 !== 61 !>= 62 !?= 63 !@= 64 !A= 65 !B= 66 !C= 67 !D= 68 !E= 69 !
7 !F= 70 !G= 71 !H= 72 !I= 73 !J= 74 !K= 75 !L= 76 !M= 77 !N= 78 !O= 79 !
8 !P= 80 !Q= 81 !R= 82 !S= 83 !T= 84 !U= 85 !V= 86 !W= 87 !X= 88 !Y= 89 !
9 !Z= 90 ![= 91 !\= 92 !]= 93 !^= 94 !_= 95 !`= 96 !a= 97 !b= 98 !c= 99 !
10 !d=100 !e=101 !f=102 !g=103 !h=104 !i=105 !j=106 !k=107 !l=108 !m=109 !
11 !n=110 !o=111 !p=112 !q=113 !r=114 !s=115 !t=116 !u=117 !v=118 !w=119 !
12 !x=120 !y=121 !z=122 !{=123 !|=124 !}=125 !~=126 ! =127 ! 128 ! 129 !
13 ! 130 ! 131 ! 132 ! 133 ! 134 ! 135 ! 136 ! 137 ! 138 ! 139 !
14 ! 140 ! 141 ! 142 ! 143 ! 144 ! 145 ! 146 ! 147 ! 148 ! 149 !
15 ! 150 ! 151 ! 152 ! 153 ! 154 ! 155 ! 156 ! 157 ! 158 ! 159 !
16 ! 160 ! 161 ! 162 ! 163 ! 164 ! 165 ! 166 ! 167 ! 168 ! 169 !
17 ! 170 ! 171 ! 172 ! 173 ! 174 ! 175 ! 176 ! 177 ! 178 ! 179 !
18 ! 180 ! 181 ! 182 ! 183 ! 184 ! 185 ! 186 ! 187 ! 188 ! 189 !
19 ! 190 ! 191 ! 192 ! 193 ! 194 ! 195 ! 196 ! 197 ! 198 ! 199 !
20 ! 200 ! 201 ! 202 ! 203 ! 204 ! 205 ! 206 ! 207 ! 208 ! 209 !
21 ! 210 ! 211 ! 212 ! 213 ! 214 ! 215 ! 216 ! 217 ! 218 ! 219 !
22 ! 220 ! 221 ! 222 ! 223 ! 224 ! 225 ! 226 ! 227 ! 228 ! 229 !
23 ! 230 ! 231 ! 232 ! 233 ! 234 ! 235 ! 236 ! 237 ! 238 ! 239 !
24 ! 240 ! 241 ! 242 ! 243 ! 244 ! 245 ! 246 ! 247 ! 248 ! 249 !
25 ! 250 ! 251 ! 252 ! 253 ! 254 ! 255 ! |
|
WHEN PASSED TO SORTINIT, THE TABLE ABOVE IS PRECEDED BY TWO
BYTES. THESE FIRST TWO BYTES CONTAIN A FLAG BYTE OF %000 AND A LENGTH
BYTE OF %377 RESPECTIVELY.
This translation table display is followed by a display of
the contents of the ALTSEQ array in decimal format and octal word format.
This information is not shown here as it is intended for programmatic
use. Refer to the SORT-MERGE/XL Programmer's Guide (32650-90080)
for additional information.
To receive a copy of the standard ASCII translation table
from the printer, use the OFFLINE parameter of the >SHOW command, as follows:
>DATA IS ASCII, SEQUENCE IS ASCII
>SHOW TABLE, OFFLINE |
For additional information on translation tables refer to
the >SHOW command in Chapter 6.
Printable version
