Network Transport Configuration

If you press the [Guided Config] function key from the NS Configuration screen, the Network Transport Configuration screen (#42) shown in Figure 2-5 “Network Transport Configuration Screen” appears. This is the first guided configuration screen. For information specific to the guided configuration screens (including the screen shown here), refer to the HP e3000/iX Network Planning and Configuration Guide.

Figure 2-5 Network Transport Configuration Screen

Guided configuration is an NMMGR procedure that automates configuration. It assumes and supplies default values wherever possible to furnish most of the configuration file's data.

When you run guided configuration, you visit only a minimal number of configuration screens. A number of these screens are different from those you would see during unguided configuration.

	NOTE: HP strongly recommends that you use guided configuration to configure each node initially. You can also take advantage of its convenience later for most network maintenance and updating. Use manual configuration only if guided configuration does not provide access to the configuration data you need to change.