The X.25 Link Configuration Screen (#84) in Figure 3-6 “X.25 Link Configuration Screen” is displayed when you add a link of type X.25 at the
Link Selection Screen (Figure 3-2 “Link Selection Screen”) and press the
[Add] or [Modify] function key. This screen is also displayed when you type
the path name:
@LINK.linkname
in the command window of any screen and press the [Enter] key, where linkname is a configured
X.25 link.
Press the [Save Data] function key to transfer the data displayed on the screen
to the configuration file you are creating or updating. Verify that the
data record has been created by checking that the Data flag is set to Y.
Fields
- DTC node name
This is the name of the DTC node where the DTC/X.25 Network
Access card is installed. The format for the name is name.domain.organization. The entire DTC name can have a maximum number
of 50 characters, and each field can have a maximum of
16 characters (alphanumeric, underscore or hyphens) and
is separated from the other fields by periods. The first character
of each field must be alphabetic.
Each DTC must have a unique name within
the local network, and the name.domain portion of the DTC name must be unique for
each DTC within the internetwork. HP recommends that all nodes on
the same network be assigned the same domain and organization.
The DTC node name must match the name configured at the DTC
Node Name screen under DTS configuration. Refer to Configuring
Systems for Terminals, Printers, and Other Serial Devices for
more information about configuring the DTC.
- DTC card number
(Required.) Enter the DTC
card number. The DTC card number is the number of the slot in the
DTC where the DTC/X.25 Network Access card for this node resides.
Slot 0 of the DTC is reserved and cannot be used by a DTC/X.25 Network
Access card. A DTC can be configured with a maximum of 3 DTC/X.25
Network Access cards.
Make sure that the DTC is already configured before you configure
an X.25 link on the HP e3000. Refer to Configuring
Systems for Terminals, Printers, and Other Serial Devices and Using
the OpenView DTC Manager for complete information on
configuring the DTC.
Default: None.
Range: 1-5
Printable version
