The Protocol Configuration screen (#113) in Figure 6-4 “Protocol Configuration Screen” is displayed when you press the [Go To PROTOCOL] function key at the Point-to-Point Network Interface Configuration
screen (Figure 6-3 “Point-to-Point Network Interface
Configuration Screen”). It is also displayed when
you type the path name:
@NETXPORT.NI.NIname.PROTOCOL
in the Command window of any screen and press the [Enter] key, where NIname is a configured
point-to-point (router) NI name.
For a point-to-point NI, you must configure the IP protocol.
The Dial protocol must be configured if you have switched lines.
Choose the protocol to configure and press the corresponding
function key.
Printable version
