The X.25 User Facility Sets screen (#164) in Figure 7-6 “X.25 User Facility Sets” is displayed when you press the [Go To FACSET] function key at the General X.25 Configuration screen
(Figure 7-5 “General X.25 Protocol Screen”). It is also displayed when you type the
path name:
@NETXPORT.NI.NIname.PROTOCOL.X25.FACSET
in the Command window of any screen and press the [Enter] key, where NIname is a configured
X.25 NI.
To edit an existing X.25 facility set, enter the name of the
X.25 facility set to be modified and press the [Modify] function key. To add a new X.25 facility set, enter a
new facility set name and press the [Add] function key.
You may configure up to 128 User Facility Sets
under an X.25 NI.
Fields
- Set name
This name defines a set of X.25 parameters that
can be associated with an SVCPATH or a PVCPATH. The name can contain
as many as eight alphanumeric characters. The first character must
be alphabetic.
- New name
This field is used to rename a facility set. Enter
the current name in the set name field. Enter the new name in the
new name field and press the [Rename] function key.
The name can contain as many as eight alphanumeric characters.
The first character must be alphabetic.
Printable version
