The X.25 Link Configuration screen (#106) shown in Figure 7-12 “X.25 Link Configuration Screen” is displayed when you select an NI link name and press
the [Add] or [Modify] function key at the X.25 Network Interface Link screen
(Figure 7-11 “X.25 Network Interface Links Screen”). It is also displayed when you type
the path name:
@NETXPORT.NI.NIname.LINK.linkname
in the Command window of any screen and press the [Enter] key, where NIname is a configured
X.25 NI, and linkname is a configure X.25 link.
Press the [Save Data] function key to transfer the data displayed on the screen
to the configuration file you are creating or updating. Verify that the
data record has been created by checking that the Data flag is set to Y.
Fields
- Start device on network initialization (Y/N)
Answer Y (Yes) if you want the device connected over this
link to be started when the network is first initialized. Answer N (No) if you do NOT want the device started when
the network is first initialized.
Default value: Y
Range: Y or N
Printable version
