The Network Directory Main screen (#8) shown in Figure 13-3 “Network Directory Main Screen” is displayed when you press the [Open Directry] or the [Create Directry] function key at the Open Configuration/Directory File
screen (#1) as shown in Figure 2-2 “Open Configuration/Directory Screen”. This screen
is also displayed if a network directory has already been opened
and you type NETDIR in the command window of any screen and press the [Enter] key.
This screen is the main select screen from which all directory
functions are accessed. The currently opened directory is displayed
at the bottom of all network directory screens. The percentage of
the network directory that is full is shown in the lower right corner
of the screen.
Press the [Update Dir] function key to modify the contents of the directory by
adding, deleting and updating node names and path reports.
Press the [Print Dir] function key to print out a copy of the directory to formal
designator FORMLIST, device class LP. You can use a file equation for FORMLIST to redirect the output to another device class
or disk file. To set a file equation without leaving
NMMGR, enter the appropriate MPE command, preceded by a colon (
:), in the command window and press the [Enter] key.
Press the [Maint Mode] function key to enter the command interface to perform
directory merging or to expand the size of your directory. Refer to Using
the Node Management Services (NMS) Utilities for details
on maintenance mode.
Within the maintenance mode interface, command input is read
from the formal designator NMMGRCMD, which defaults to $STDINX. Type EXIT and press the [Return] key to leave maintenance mode.
Printable version
