|
|
United States-English | |
|
|
 |
|
HP e3000/iX Network Planning and Configuration Guide: HP e3000 MPE/iX Computer Systems
Chapter 7 Configuring a Point-to-Point Node |
|
|
Table of Contents This chapter provides step-by-step instructions for configuring Point-to-Point links. (Point-to-Point links are sometimes referred to as router links.) This manual assumes that you are using the guided configuration capabilities of NMMGR. Figure 7-1 “Point-to-Point Link Configuration Screen Flow” shows the screen flow for configuring Point-to-Point screens. Screens unique to Point-to-Point configuration are indicated by bold boxed screens. [FUNCTION] denotes the function key used at a screen to invoke the next screen on the screen flow. Before using NMMGR to configure a link, you should complete the worksheets provided. See Chapter 4 “Planning for Node Configuration” for more information on planning your configuration and filling out the configuration worksheets. This chapter includes step-by-step instructions to help you perform the following tasks:
Once the above tasks are completed, refer to Chapter 10 “Validating and Cross-Validating with SYSGEN” for step-by-step instructions to help you perform the following validation tasks:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Printable version |
|
|
|
|
|
|||||||||||||||
|
|||||||||||||||
