|
|
United States-English | |
|
|
 |
|
Configuring and Managing Host-Based X.25 Links: HP 3000 MPE/iX Computer Systems
Chapter 5 Preparing to Configure X.25 iX System Access |
|
|
Table of Contents This chapter details the information you will need before you can begin to configure X.25 iX System Access for host-based systems that will include an X.25 system-to-system link. Sample worksheets are included to ease configuration. Hewlett-Packard recommends that you configure the datacommunications and terminal subsystem (DTS) before configuring the NS X.25 link. If you have not already done so, turn to chapters 2 and 3 in this manual for information on how to configure your system's DTCs. If you also need to configure a point-to-point link or a LAN link, see the HP 3000/ iX Network Planning and Configuration Guide. This chapter describes how to:
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Printable version |
|
|
|
|
|
|||||||||||||||
|
|||||||||||||||
