Determine X.25 iX System Access Network Characteristics

You must define the characteristics of the X.25 iX System Access link or links that you will be configuring. You must specify a link name and configuration for each DTC/X.25 Network Access card that will be used for X.25 system-to-system connections.

Several of the parameters that you will configure for X.25 iX System Access through the NS configuration must match the parameters you configured for DTS (chapters 2 and 3). The common parameters are:

Once you have defined the characteristics of the X.25 network, transfer this information onto the X.25 Configuration Worksheet and the X.25 Virtual Circuit Configuration Worksheet.

X.25 Configuration Worksheet

Fill out worksheet as shown in Figure 5-1 “X.25 Configuration Worksheet” for the X.25 iX System Access links you are configuring.

Figure 5-1 X.25 Configuration Worksheet

X.25 Virtual Circuit Configuration Worksheet

Fill out worksheet as shown in Figure 5-2 “X.25 Virtual Circuit Configuration Worksheet” for each X.25 iX System Access link you are configuring.

Figure 5-2 X.25 Virtual Circuit Configuration Worksheet