Use the HELP command for information about the supported FTP user
commands. The REMOTEHELP command provides information about the remote host FTP
server.
Listing FTP User Commands |
 |
Enter the HELP command at the ftp> prompt for a list of FTP supported user commands:
ftp> HELP
FTP recognizes the following commands: |
:
append
ascii
binary
bye
bytestream
case
cd
close
debug
delete | dir
disconnect
exit
exitonerror
form
get
help
lcd
ls
mdelete
mget | mkdir
mode
modtime
mput
open
prompt
put
pwd
quit
quote
recv | remotehelp
rename
reset
rmdir
runique
send
site
size
status
struct
sunique | system
timeout
trace
type
verbose
user
? |
| Additional help available on buildparms, ftperr#, ftpwarn#, ftpinfo# |
Enter the HELP command with a valid FTP user command to obtain information
about individual commands supported. For example:
ftp> HELP OPEN
OPEN remote-host
Establish a connection to the specified hot FTP server.
Remote-hot
can either be an ARPA domain name, an MPE/iX NS node name, or an IP address. |
Listing the Remote FTP Server Commands |
|
The REMOTEHELP command displays the remote host supported server commands.
A display similar to the following appears, (depending on the supported
server commands).
| 214-HP ARPA FTP SERVER recognizes the following commands (*-unimplemented): |
USER PASS
ACCT*
SMNT*
REIN*
QUIT | PORT
PASV*
TYPE
STRU
MODE
RETR | STOR
APPE
MLFL*
MAIL*
MSND*
MSOM* | MSAM*
MRSQ*
MRCP*
ALLO*
REST*
RNFR | RNTO
ABOR*
DELE
CWD
XCWD
LIST | NLST
SITE
SYST
STAT
HELP
NOOP | MKD
XMKD
RMD
XRMD
PWD
XPWD | MKD
XMKD
RMD
XRMD
PWD
XPWD |
| 214 Refer to FTPDOC.ARPA.SYS for more FTP Server information. |
Entering REMOTEHELP command, where command is a valid remote FTP server command, provides you
with a brief description of the server command. For example:
ftp> REMOTEHELP USER
214 Syntax: USER username |
FTP server commands may not have the same name as the user
commands.
Printable version
