SCSI Driver c8xx

new for
March 2002

The c8xx driver is being updated to support two new SCSI PCI Ultra160 Host Bus Adapters (HBAs) that are available beginning in March 2002. The driver is included in the March 2002 HWEnable11i bundle, which is available on the March 2002 11i OE media and on the Support Plus CD.

Four patches (PHKL_25712, PHCO_25831, PHKL_24854, and PHKL_25218) are required for the c8xx driver. Note that all four patches are included in the HWEnable11i bundle. So, if you install the entire bundle, you will automatically install the four patches.

Table 3-5 HBAs Supported by c8xx SCSI Driver for HP-UX 11i

SCSI HBA	Bus Type	Technology	Supported HP-UX Systems
A6828A (single channel)	PCI	Ultra160 LVD/SE SCSI-3	A400, A500, and L- and N-Class, rp24`xx`, rp54`xx`, rp74`xx`, rp8400, and Superdome^[1] servers
A6829A (dual channel)	PCI	Ultra160 LVD/SE SCSI-3	A400, A500, and L- and N-Class, rp24`xx`, rp54`xx`, rp74`xx`, rp8400, and Superdome^[1] servers
^[1]NOTE: Check the HP IT Resource Cenger (ITRC) periodically for the availability of OLAR support on Superdome servers. Information for accessing the ITRC is given below.

For the most recent information about the SCSI HBAs, you should periodically check the SCSI HBA information at the HP IT Resource Center (ITRC), at http://itrc.hp.com. Go to the area for knowledge trees. Then, under “Hardware,” select “Networks,” then “mass storage connectivity,” then “scsi hba's,” and then “technical support.” This takes you to a page titled “scsi hba's.” (You might want to bookmark this page for future reference.)

SCSI Driver c8xx

Technical documentation

» Table of Contents

new for
March 2002

SCSI Driver c8xx

Technical documentation

» Table of Contents

new for March 2002

new for
March 2002