The following messages may occur during the HP-UX 11i v1.6
install.
swinstall.log
file warning |
 |
The cold-install
of HP-UX 11i v1.6 produces a warning message within the /var/adm/sw/swinstall.log
file. This warning is common to all of the HP-UX 11i v1.6 OE installations.
The message follows:
* Beginning Selection * "gold15:/": This target does not exist and will be created.WARNING: The software specified contains a kernel fileset.
It will be necessary to reconfigure and reboot the system to
make the kernel software functional.
Since products being installed contain kernel objects
(kernel filesets), you need to generate a new kernel, otherwise,
this warning appears.
CDE
DesktopConfig.LITECONFIG Warning |
|
One or more warning messages may be placed in the file: /var/adm/sw/swconfig.log
during the configure (swconfig) phase of the installation.
WARNING: The software specification "CDE-ChineseS" refers to a bundle (or to a product, subproduct or fileset within a bundle). Only some of the software specified could be selected. The messages below show those items which could not be selected and those items which were selected but generated a warning: * Could not apply the software selection "DesktopConfig.LITECONFIG,r=B.11.22,a=HP-UX_B.11.22_IA/PA,v=HP"; it is not available from depot or root "gold15:/". |
This message occurs because DesktopConfig.LITECONFIG is excluded during
the installation selection phase due to mutual exclusions with other
products in the HPUXBaseOS bundle. Since the product was excluded
at installation time, but is part of the CDE bundles, the selection
of products at configure time produces these warnings. Multiple instances
of this warning with different software specifications may occur.
This message is strictly informational and no action is required.
OpenGLDevKit.OPENGL-xxx
Warning |
|
One or more warning messages may be placed in the file: /var/adm/sw/swconfig.log
during the configure (swconfig) phase of the installation.
WARNING: The software specification "HPUX11i-TCOE" refers to a bundle (or to a product, subproduct or fileset within a bundle). Only some of the software specified could be selected. The messages below show those items which could not be selected and those items which were selected but generated a warning: * Could not apply the software selection "OpenGLDevKit.OPENGL-64-CTRB,r=B.11.22.01,a=HP-UX_B.11.22_PA,v=HP";it is not available from depot or root "gold15:/". * Could not apply the software selection "OpenGLDevKit.OPENGL-64-EXPL,r=B.11.22.01,a=HP-UX_B.11.22_PA,v=HP";it is not available from depot or root "gold15:/".... |
|
OpenGLDevKit was not selected for installation because it
is a PA-RISC only product and will not install on an Itanium-based
system. Since it was not selected for installation but is part of
the HPUX11i-MTOE and HPUX11i-TCOE bundle, the selection of products
at configure (swconfig) time produces this warning. Multiple instances
of the second part of this message may occur, each referencing different
software selections beginning with OpenGLDevKit.OPENGL.
This message is strictly informational and no action is required.
SW-GETTOOLS
software selections not available |
|
One or more warning messages may be placed in the file: /var/adm/sw/swconfig.log
during the configure (swconfig) phase of the installation.
WARNING: The software specification "HPUXBaseAux" refers to a bundle (or to a product, subproduct or fileset within a bundle). Only some of the software specified could be selected. The messages below show those items which could not be selected and those items which were selected but generated a warning: * Could not apply the software selection "SW-GETTOOLS.PRE-UPDATE,r=B.11.22,a=HP-UX_B.11.22_IA/PA,v=HP"; it is not available from depot or root "gold15:/". * Could not apply the software selection "SW-GETTOOLS.SD-SUPPORT,r=B.11.22,a=HP-UX_B.11.22_IA/PA,v=HP"; it is not available from depot or root "gold15:/". * Could not apply the software selection "SW-GETTOOLS.SD2-SUPPORT,r=B.11.22,a=HP-UX_B.11.22_IA/PA,v=HP"; it is not available from depot or root "gold15:/". |
|
SW-GETTOOLS product is installed as part of the update toolset,
which is not supported in HP-UX 11i Version 1.6 (B.11.22). During
a cold install, this product is not selected for installation, which
results in this warning message.
This message is strictly informational and no action is required.
Obsolete
Product Warnings |
|
One or more warning messages may be placed in the file: /var/adm/sw/swconfig.log
during the configure (swconfig) phase of the installation.
WARNING: The software specification "HPUXBaseOS" refers to a bundle (or to a product, subproduct or fileset within a bundle). Only some of the software specified could be selected. The messages below show those items which could not be selected and those items which were selected but generated a warning: * Could not apply the software selection "Obsolete.DISKLESS,r=B.11.22,a=HP-UX_B.11.22_IA/PA,v=HP"; it is not available from depot or root "gold15:/". * Could not apply the software selection "Obsolete.INSTANTIGNITE,r=B.11.22,a=HP-UX_B.11.22_IA/PA,v=HP"; it is not available from depot or root "gold15:/". |
A software selection titled "Obsolete.XYZ" is
only installed if a system is being updated from one release to
the next and is used to remove obsolete products from the system.
Because there are no obsolete products to remove during a cold install,
these software selections are excluded, generating a warning message.
This message is strictly informational and no action is required.
VxVM
Warning |
|
The install.log file may contain the following message:
* Configure_Disks: Begin
* Will install B.11.22 onto this system.
* Starting VxVM
* Creating VxVM Disk "c2t1d0s2" (0/18/1/0/0.0.1.0).
* Adding disk "c2t1d0s2" to rootdg.
* Enabling VxVM
07/25 18:20:01: vxvm:vxconfigd: WARNING: File
/etc/vx/array.info doesn't exist.
Generating file /etc/vx/array.info.
This message does not require action. The log file is located
at:
/var/opt/ignite/local/install.log
Printable version
