 |
» |
|
|
|
Beginning with HP-UX 11i, the operating system is delivered
as part of an HP-UX Operating Environment (OE), an integrated and
tested software solution containing the operating system and select
applications. In HP-UX 11i v1.6, the operating system and selected applications
are provided on a set of DVDs. To install the full OE, all DVDs
are necessary. For specific information, refer to HP-UX
11i Version 1.6 Installation and Configuration Guide,
part number 5187-0187 The following software bundles are always delivered with each
HP-UX Operating Environment. Thus, if you do a minimum install,
these bundles, plus the HP-UX applications within each OE, will
be loaded: HPUXBase64, which consists of operating system commands and
libraries bundled for 64-bit systems. HPUXBaseAux, which includes system manageability software
such as Event Monitoring Service (EMS), Judy Libraries, Software
Distributor (SD), Update-UX, and the new kernel configuration tool,
kcweb. This additional required core software is also referred
to as the Auxiliary OS. Always-Installed network
and I/O drivers required by the operating system and installed by
default are: Fibre
Channel Tachlite HBA driver for the PCI adapter intl100 driver for the
A6792A card 100BASE-T driver for Ethernet
adapters 1000Base-T/SX (Gigabit Ethernet)
drivers for cards A4926A,
A6825A, A6794A and
A6847A SCSI Ultra4 interface driver
for IPF systems with the LSI 53C1030 SCSI Ultra4 controller
Other Always-Installed products include: OnlineDiag, installed by default, which provides the HP-UX
11i Diagnostics that include STM, ODE, and EMS hardware monitors. Base VERITAS Volume Manager version 3.1 for HP-UX
(VxVM). This is the same product that was delivered in the HP-UX
11i v1.5 release though it is no longer the default volume manager. (See Chapter 4 “File
and Disk Management” for
specific information.) HP Apache-based Web Server
The Logical Volume Manager
(LVM) is the HP-UX proprietary volume manager and is now the default
volume manager for HP-UX. CDE-English: CDE language (such as for English or alternate
languages). Selectable software contains the additional products
that you can select. These products include: Intrusion Detection System
IDS/9000 (only available on Commercial Server media)
Operating
Environment for HP Commercial Servers | |
The OE for commercial servers contains all the base functionality
that is common to other OEs, including the base 64-bit HP-UX Operating
System, network drivers, and other always-installed functionality.
In addition, this OE includes: Common Internet File System (CIFS)/9000
Server version A.01.08 (as is delivered in HP-UX 11i v.1.0) CIFS/9000 Client version A.01.08 (as is delivered
in HP-UX 11i v.1.0) Pluggable Authentication Modules (PAM) Kerberos
Operating
Environments for HP Workstations and Technical Servers | |
The following HP-UX 11i v1.6 Operating Environments are available
for HP9000 workstations and technical servers, though these OEs
are not supported on technical workstations: HP-UX
11i v1.6 Minimal Technical OE (MTOE). Contains all the base functionality that is common to other
OEs, including the base 64-bit HP-UX Operating System, network drivers,
and other always-installed functionality. However, it includes only
a sparse set of high-demand applications so as not to increase purchase
costs, support costs, or license costs over the base OE. These applications
are: 3D Graphics
Developers Kit and Runtime Environment (RTE) Technical System Configuration (TechSysConf) See the “Technical
System Configuration” for
specific information including important potential impact information.
HP-UX
11i v1.6 Technical Computing OE (TCOE). Contains the HP-UX 11i v1.6 MTOE, and additional applications
to enable a workstation or technical server. These applications
are: CIFS/9000 Server version A.01.08 (as
is delivered in HP-UX 11i v.1.0) CIFS/9000 Client version A.01.08 (as is delivered
in HP-UX 11i v.1.0) Message Passing Interface
(MPI) Pluggable Authentication
Modules (PAM) Kerberos
|
Printable version
