Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
hp OpenCall SS7 platform Application Developer's Guide: For Release 3.1 on Linux > Appendix A ISUP Library Values

ITU-T - based HP OpenCall SS7 ISUP

» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

 » Index

Table A-5 SETUP_FAILURE_IND

Value

Comments

T27_TIMEOUT

T27 expired while in Wait for CCR state

DUAL_SEIZURE

  • IAM received while sending CONTINUITY_RECHECK_REQ (CRCS state machine)

  • IAM received while sending SETUP_REQ

CPC_BUSY

CONTINUITY_RECHECK_REQ requested while the circuit was not IDLE

BLOCKING

  • CGB (Maintenance) has been sent through GROUP_BLOCKING_REQ in WaitForContinuity State (CPCI)

  • CGB (Maintenance) has been sent through GROUP_BLOCKING_REQ in WaitForACM State (CPCI)

  • CGB (Maintenance) has been received while in WaitForACM State (CPCO)

  • CGB (Maintenance) has been received while in WaitForContinuity State (CPCO)

RELEASE

  • CGB (Hardware) has been sent through HW_GROUP_BLOCKING_REQ in WaitForContinuity State (CPCI)

  • CGB (Hardware) has been received while in WaitForContinuity State (CPCO)

COT_FAILURE

  • COT indicating failure was received in WaitForContinuity State (CPCI)

  • COT indicating failure was sent during outgoing continuity recheck

CRCR_RESET

ITU97 only (CRCR state machine):

  • RSC received while waiting for Continuity (CCR)

  • GRS received while waiting for Continuity (CCR)

  • A Reset occurred while waiting for Continuity (CCR)

FLOW_CONTROL

In WaitForACM State (CPCO) in flow control condition (T7 expiry+outbound flow control)

 

Table A-6 START_RESET_IND

Value

Comments

UNEXPECTED_MESSAGE

  • ACM, ANM, CON, CPG, FOT, RES, SAM, SUS, INR, INF, PAM, FAR, FRJ, FAA, COT received in IDLE State

  • IAM, ACM, CON, ANM, CPG, FOT, RES, SUS, INR, PAM, FAR, FAA, FRJ received in WaitForContinuity State (CPCI)

  • IAM, ACM, ANM, CON, CPG, FOT, RES, SUS, FAR, FRJ, FAA, COT received in WaitForACM (CPCI)

  • ANM, FOT, RES, SAM, SUS, FAR, FRJ, FAA received in WaitForACM (CPCI)

  • ACM, ANM, CON, CPG, FOT, RES, SAM, SUS, FAR, FAA, FRJ received in WaitForContinuity (CPCO)

COT_CC_NOT_REQUIRED

COT received when not awaited

UNEQUIPPED_CIRCUIT

Received a UCIC on a circuit that is not Idle regarding the CPC state machine.

In this case, the application should not wait for a RESET_CONF.

TIMER_SHORTAGE

  • when trying to start a T2, T6, T7, T8, T9, T33, or T_CRA timer, there is no timer available and the corresponding circuit is not idle regarding the CPC state machine.

  • when trying to start a T34 timer, there is no timer available and the SSC state machine is not in the idle state (TTC3, SSUR, and ITU97 only).

 

Table A-7 START_RELEASE_IND

Value

Comments

CONTINUITY_SUCCESS

BackwardCheckTone received in WaitForBackwardCheckTone, after ENABLE_ECHO_IND_ACK received

UNEXPECTED_RLC

  • RLC received in WaitForACM, WaitForANM, ACTIVE, Suspended States (CPCI)

  • RLC received in WaitForACM, WaitForANM, ACTIVE, Suspended States (CPCO)

  • RLC received in WaitForContinuity (CPCI, CPCO)

  • RLC received after IAM received (CPCI)

BLOCKING

  • BLO received in WaitForACM (CPCO)

  • BLO received in WaitForContinuity (CPCO)

T2_TIMEOUT

T2 timer expired

T6_TIMEOUT

T6 timer expired

T8_TIMEOUT

T8 timer expired

T7_TIMEOUT

T7 timer expired

T9_TIMEOUT

T9 timer expired

T33_TIMEOUT

T33 timer expired

 

Table A-8 MAINTENANCE_SYSTEM_IND

Value

Comments

UNEQUIPPED_CIRCUIT

UCIC received.

TIMER_SHORTAGE

Too many timers is use, no more timers available.

RECV_ON_UNEQUIPPED_CIRCUIT

A message is received on a non configured or unequipped circuit.

MGBS/HGBS state machine 

MN_GROUP_BLOCKING

  • GROUP_BLOCKING_REQ has been sent (MGBS only)

  • in WaitForCGUA State, CGUA received and CGUA != CGU status bits (ITU-T 93/97 ONLY)

MN_GROUP_UNBLOCKING

In WaitForCGBA State, CGBA received and CGBA != CGB status bits (ITU-T 93/97 ONLY)

HW_GROUP_BLOCKING

HW_GROUP_BLOCKING_REQ has been sent (HGBS only)

HW_GROUP_UNBLOCKING

ITU97 only (and all standards based on ITU97), HGBS state machine:

  • on CGBA receipt in Idle state, generated for each circuit not hardware locally blocked

  • on WaitForCGBA state, generated for each circuit not asked to be blocked in the CGB and marked as blocked in the CGBA statusBits (that is, CGB status bits < CGBA status bits)

  • on WaitForCGUA state, generated for each circuit not asked to be unblocked in the CGU and marked as unblocked in the CGUA status bits (that is, CGU status bits < CGUA status bits)

  • on WaitForCGUA state, generated if not all circuits are acknowledged in the CGUA status bits (that is, CGU status bits > CGUA status bits) (only one notification)

T19_TIMEOUT

First T19 expiry

T21_TIMEOUT

First T21 expiry

T18_NOT_RUNNING

In WaitForCGBA State, after CGBA is received, CGB=CGBA (status bits), and T18 timer is not running

PRIORITY_TO_GROUP_RESET

In WaitForCGBA or WaitForCGUA State, after GRS sent through GROUP_RESET_REQ, CGB<=GRS or CGU<=GRS

T20_NOT_RUNNING

In WaitForCGUA State, after CGUA is received, CGU=CGUA (status bits), and T20 timer is not running

MGBR state machine

 

MN_BLOCKING

GROUP_BLOCKING_IND received

HGBR state machine

 

HW_BLOCKING

HW_GROUP_BLOCKING_IND received

HRB state machine

 

HW_UNBLOCKING

RSC/ GRS are sent (through RESET_REQ/GROUP_RESET_REQ) or received in remotely blocked state

HLB state machine

 

HW_UNBLOCKING

RSC/GRS are sent (through RESET_REQ/GROUP_RESET_REQ) in locally blocked state

CRS state machine

 

T17_TIMEOUT

First T17 expiry

RLC_AFTER_T17

RLC received in WaitForRelease state and T16 not running

CRCS state machine

 

T5_TIMEOUT

T5 timer expired

T24_TIMEOUT

T24 timer expired in WaitForBackwardChecktone and check indicator=2

BACKWARD_CHECK_TONE_ACK

BackwardCheckTone received and check indicator=3, after ENABLE_ECHO_IND_ACK received

CRCR state machine

 

COT_RECEIVED

COT failure received in WaitForREL state and check indicator=2

REL_RECEIVED

REL received in WaitForREL state and check indicator=3

CQS state machine

 

T34_TIMEOUT

T34 timer expired (ITU-T 88 and TTC ONLY)

T28_TIMEOUT

T28 timer expired (ITU-T 93/97 ONLY)

BLS state machine

 

MN_BLOCKING

BLOCKING_REQ sent

T12_NOT_RUNNING

In WaitForBLA State, BLA received and T12 timer not running

T13_TIMEOUT

First T13 expiry

MN_UNBLOCKING

After RSC/GRS sent (through RESET_REQ/GROUP_RESET_REQ) in WaitForBLA or LocallyBlocked state

T14_NOT_RUNNING

In WaitForUBA State, UBA received and T14 timer not running

T15_TIMEOUT

First T15 expiry

BLA_WHEN_IDLE

ITU97 only (for all standards based on ITU97):
A BLA is received on a circuit for which the BLS state machine is in the Idle state (that is, no Blocking action has been requested).

UBA_WHEN_LOCALLY_BLOCKED

ITU97 only (for all standards based on ITU97):
A UBA is received on a locally blocked circuit.

BLR state machine

 

MN_BLOCKING

  • BLO received in IDLE state

  • after GRS/GRA exchange and status bits in GRA = 1

MN_UNBLOCKING

  • RSC sent or received, GRS received in WaitForBLA or remotely blocked state

  • IAM received in remotely blocked state

CPC state machine

 

T5_TIMEOUT

T5 timer expired

CGRS state machine

 

T22_NOT_RUNNING

In WaitForGRA state, after GRA received and T22 timer not running

T23_NOT_RUNNING

First T23 timer expiry

 

Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© Hewlett-Packard Development Company, L.P.