Ready-to-install V.35 and E1/T1 TSCs comprise a 32-bit V.35
or E1/T1 universal telecom signaling PMC card mounted on a full-length
PCI adapter card. The PMC card implements the physical line interface
to the SS7 network.
The physical details of each type of TSC are described below.
V.35 Telecom
Signaling Card |
 |
The figure below shows the V.35 Telecom Signaling Card mounted
on the adapter card.
LEDs
Refer to “Checking
LEDs” for
a description of the LEDs.
Ports and Links
The V.35 TSC has four ports. You can assign a single SS7 link
to each of these ports. The card is available with 2 or 4 links.
Part Numbers
The part number of a V.35 TSC depends on the number of links
that it supports, as follows:
HP Part Number | Number of Links |
|---|
J3528-60002 | 2 |
J3528-60004 | 4 |
Upgrading the Number of Links
A V.35 TSC is supplied with a defined number of links, as
detailed above. This number can be upgraded (up to a maximum of
4) without removing the card from the platform. Refer to the “Adding and Activating
Links on the SS7 Network” for
information on upgrading the TSC link capability.
E1/T1 Telecom
Signaling Card |
|
The figure below shows the E1/T1 Telecom Signaling Card mounted
on the adapter card.
LEDs
Refer to “Checking
LEDs” for
a description of the LEDs.
Ports and Links
The E1/T1 TSC has 4 ports and is available with 2, 4, 8 or
16 links. You can assign up to 16 links to any one port. Each link
can be assigned to any valid timeslot, on any port.
Part Numbers
The part number of an E1/T1 TSC depends on the number of links
that it supports, as follows:
HP Part Number | Number of Links |
|---|
J3527-60002 | 2 |
J3527-60004 | 4 |
J3527-60008 | 8 |
J3527-60016 | 16 |
Upgrading the Number of Links
An E1/T1 TSC is supplied with a defined number of SS7 links
that it can support, as detailed in the above table. The number
of links supported can be increased to a maximum of 16. This upgrade
can be performed without removing the card from the platform.
Refer to “Adding and Activating
Links on the SS7 Network” for
information on upgrading the TSC link capability.
Printable version
