Use this procedure to create and use several identical platform configurations
with different network configurations. This will allow you to switch
easily between the different configurations (mainly for test and development
purposes).
Follow
the steps below to configure and save the configurations. Steps
3 to 7 must all be done on the same host.
On one host, save
your current configuration using the ss7CheckPoint command.
Stop the stack on both hosts
On one host, save the installed
configuration using the cfgMgr -copy command.
Remove the reference files stored
in the directory /etc/opt/OC/SS7 using the command:
rm Saved.<className>.conf.ref Saved.<className>.conf
Restart the stack on one host.
Configure your new network using
the SS7 Monitor.
Checkpoint the new configuration.
Save the newly checkpointed configuration.
Use the cfgMgr -copy command.
Start the other host. The new
configuration is now running.
At any later stage, you can switch between the available configurations using
the cfgInstall command.
 |
| |
|
 | NOTE: All files in the HP OpenCall SS7 configuration directories
must be owned by a member of the group ocadmin. |
|
| |
|
Printable version
