 |
» |
|
|
|
Run setup.exe to launch the HP Systems Insight Manager Installer. The HP Systems Insight Manager Welcome screen appears.
The Welcome screen displays links to
the following documentation: Release Notes (hpsim-releaseNote.pdf) User Guide (hpsim-userGuide.pdf)
Click Install to launch the install
process. The HP Systems Insight Manager setup window
appears with the following three stages: Pre-installation. Examines this system for previous versions of Insight Manager 7 and
runs data export tools as needed. Installation. Installs HP Systems Insight Manager and other HP management software
products. Post-installation. Runs data import tools as needed to migrate customer data from prior
local installations of Insight Manager 7.
Note: If you are using the
Management CD, place the CD in the CD-ROM drive. The CD has an autorun feature
that launches a license agreement. Accept the license agreement, and select
the Products tab. Click Install on the HP Systems Insight Manager page. Then select Install beside the HP Systems Insight Manager (Windows)
listing to launch the Installer. From the HP Systems Insight Manager Installer window, click Install to
launch the install process. (Optional) If Microsoft SQL is not detected locally, you will be prompted
to either install MSDE 2000 Service Pack 3A or continue and point to a remote
SQL installation later. Note: For a list of supported databases,
refer to the HP Systems Insight Manager Release Notes for details. Note: If choosing to use a remote
Microsoft SQL Server, verify that Microsoft Access Data Components (MDAC)
2.7 Service Pack 1 or higher is installed on the CMS. To verify whether this
is installed, navigate to C:\Program Files\Common
Files\System\Ado, and right-click on the icon for the msado15.dll file. In the pop-up menu, select Properties, and click the Version tab to display the version number. If the file is not found
in this path, use the Windows search engine to find the file. If you must
download MDAC, go to http://www.microsoft.com/downloads/, and search for MDAC Service Pack. Click Install MSDE to launch
the install. After MSDE installation is complete, you have to reboot your system
and then repeat the previous step to launch the installer. You will not see
the option to install MSDE again. Note: When you reboot, the HP Systems
Insight Manager Installer will not automatically be launched. You must manually
execute setup.exe to launch the installer.
Refer to Windows Installation Options to
view the options available during an installation of HP Systems Insight Manager. Click Typical to install the
components listed under the Available Components
for Install with minimal user interaction or click Custom to select the components you want to install. Note: The differences between the
Typical and Custom installs for this version of HP Systems Insight Manager
is that the Custom option enables you to deselect components in addition to
allowing you to change one or more of the following settings for the components: Refer to Windows Installation Options to
determine which components listed in the Available
Components for Install are mandatory in the Typical install or
optional in the Custom install. On the Typical Install - Account Authentication screen, enter the Account Credentials for the database server. If your database is local, then the Database
Server name field is pre-populated, if your database is not local then you
must supply the Database Server name. Note: In case of a reboot, if you
just installed MSDE, the administrative credentials are those you used to
log in before installing MSDE. Windows authentication is required to connect
to the SQL server (whether locally or remotely). In addition, these credentials
will also be your HP Systems Insight Manager administrative user login credentials.
Any account that is a member of the administrator group will have administrator
rights to MSDE On the Install - Summary screen,
select Install to initiate the installation
process. This process installs all the products listed in the Selected Components table. Each component will be installed sequentially for a Typical install.
Custom Install will launch them interactively. For the Custom install, you choose the components to install, starting
with #8. Installing HP System Management Homepage for an In-Place custom install: | | | |  | NOTE: For more information regarding where the System Management Homepage
default settings are stored during a Typical installation and how to change
them, refer to the System Management Homepage Installation Guide at http://h18013.www1.hp.com/products/servers/management/agents/documentation.html The HP Version Control Agent and HP Version Control Repository Manager
login to the management Web server by way of the System Management Homepage.
The System Management Homepage is security software that must be configured
in order to allow the Version Control Agent to connect to the Version Control
Repository Manager using operating system authentication. For more information
regarding migrating version control to the System Management Homepage, refer
to Migrating Version Control to the System Management Homepage for details. | | | | |
Click Next. The OS Groups dialog box appears. Click Cancel to cancel the installation process. If
you click Cancel, a message appears,
giving you the option to continue installation or to exit the installation. Select Administrator, Operator, or User from the Operating Systems Group
Name field. Note: It is necessary to assign an
account to an operating system user group with administrator privileges to
access the Version Control Repository Manager from the Version Control Agent.
Do not use the Administrator account to connect from the Version Control Agent
to the Version Control Repository Manager, as it could potentially lock the
Administrator account out. Using the Administrator account, add another account
with administrator privileges to be used for Version Control Repository Manager
access. Enter the group name of an operating systems group in the Group Name field. Click Add. The group
name is added. A maximum of five entries can be added for each group level. Note: To delete a group name, select
the group name and click Delete. Click Next to continue
or Back to return to the previous page.
The User Access dialog box appears. The User Access dialog box enables
you to configure the System Management Homepage from
the following access types: Select Anonymous Access to
enable anonymous access to unsecured pages. Select Local Access Anonymous or Local
Access Administrator to
set up the System Management Homepage to automatically grant local IP addresses
at the selected access level. Caution: Selecting Local Access with Administrator privileges provides any users with access to the local console full access
without prompting them for a user name or password.
Click Next. The Trust Mode dialog box appears. Select the level of security you want to provide from one
of the following trust modes: Trust By Certificate Click Next. The Trusted Certificates dialog box appears. The Trusted Certificates dialog box allows trusted certificate files to be added to the Trusted Certificate List. Click Add File to browse
and select any certificates to be included in the Trusted Certificate List. The Add File dialog box appears. If an invalid file name is entered in the
file name field, an error message appears, indicating the file does not exist.
Click OK to select another file, or
click Cancel to close the dialog box.
The Trusted Certificate List appears. Note: If you click Next without adding any certificates to the list, and no certificates
exist from a previous installation, a message appears indicating that if you
do not specify any trusted certificates, HP Systems Insight Manager cannot
access the HP Insight Management Agents on this system. Click OK if you do not want HP Systems Insight Manager to access the
Insight Management Agents on this system, or click Cancel to close the dialog box and add the trusted certificates
to the list. Note: The Trust By Certificates option enables the System Management Homepage
system and the HP Systems Insight Manager system to establish a trust relationship
by means of certificates. This mode is the strongest method of security because
it requires certificate data and verifies the digital signature before enabling
access. Click Next. The IP Binding dialog box appears.
or Click Import. The Import Server Certificate dialog box appears. Enter the name or IP address of the server whose certificate
you want to import. Click Get Cert. The
certificate information appears. Verify the certificate information. If you want to add this
certificate to the Trusted Certificate List,
click Accept and the certificate is
added to the Trusted Certificate List,
or click Cancel if you do not want
to add it to the Trusted Certificate List.
The Trusted Certificate List appears. Note: You can add an unlimited number
of trusted certificates. Click Next. The IP Binding dialog box appears. Click Back to return to the Trust Mode dialog box. Note: To delete a certificate, select
the certificate and click Delete. The
selected certificate is removed.
Trust By Name Select Trust By Name. Click Next. The Trusted Server dialog box appears. Note: Although the Trust By Name mode is a slightly stronger method of security
than the Trust All mode, it still
leaves your system vulnerable to security attacks. The Trust By Name mode sets up the System Management Homepage to
only accept certain requests from servers with the HP Systems Insight Manager
names designated in the Trust By Name field.
The Trust By Name option is easy
to configure and can prevent non-malicious access. For example, you might
want to use the Trust By Name option
if you have a secure network, but your network has two groups of administrators
in two separate divisions. The Trust By Name option would prevent one group from installing software to
the wrong system. This option does not verify anything other than the HP Systems
Insight Manager server name submitted. Enter the names of the servers you want to trust. Note: The server name cannot contain
the following characters: Click Add to add the
name of a server you want to trust. Click Next. The IP Binding dialog box appears. Note: If you click Next without adding any server names to the list, an error message
appears, indicating that if you do not specify any trusted server names, HP
Systems Insight Manager cannot access the Insight Management Agents on this
system. Click OK to proceed without
trusting any systems, or click Cancel to
close the dialog box and add server names to the list. Note: To delete a certificate, select
the certificate and click Delete. The
selected certificate is removed.
Trust All Select Trust All. Click Next. The IP Binding dialog box appears. Note: The Trust All option leaves your system vulnerable to security attacks
and sets up the System Management Homepage to accept certain requests from
any server. For example, you might want to use Trust All if you have a secure network, and everyone in the
network is trusted.
Select IP Binding to
enable the Subnet IP Address and NetMask. The IP Binding dialog box enables
you to bind to specific IP addresses that match a specific Subnet IP Address
or NetMask. It restricts the subnet you want to manage. Enter the Subnet IP Address in
the designated field. Enter the NetMask in
the designated field. Click Add to add the
Subnet IP Address/NetMask into the dialog box. Select a Subnet IP Address/NetMask, and click Delete to remove it from the dialog box Note: You can add up to five Subnet
IP Address/NetMask pairs. Note: If you click IP Binding but
do not specify the IP Address/NetMask then you might not be able to connect
to the System Management Homepage.
Click Next. The IP Restricted Logins dialog box appears. The IP Restricted Logins dialog box enables you to
select specific IP addresses or IP address ranges to include or exclude from
gaining login access. Although optional, the System Management Homepage can
restrict login access based on the IP addresses of the machine attempting
to gain access. Select IP Restricted Logins,
and click Next. The IP Address to Include dialog box appears. This dialog box enables
you to specify the IP address or IP address ranges to grant login access permission.
If there are IP addresses in the Inclusion list,
then only those IP addresses are enabled for login privileges. If there are
no IP addresses in the Inclusion list, then login privileges are permitted
to all IP addresses that are not in the Exclusion list. Note: A single address and ranges
of addresses can be accepted in the IP Restriction
Logins dialog box. Enter the single address in the first box. In the Include field,
enter a beginning IP address to which you want to grant login access. In the To field, enter
an ending IP address to which you want to grant login access. All IP address
that fall between the beginning and ending IP addresses are granted login
access. Click Add. The IP address
or IP address range is added to the Exclusion list.
Select an IP address or IP address range, and click Delete to remove it from the Exclusion list. Note: If you entered an invalid IP
address or IP address range, an error message appears indicating the IP address
is invalid. Click OK. Enter a valid
IP address or IP address range, and click Add again.
Click Next. The IP Address to Exclude dialog box appears. In the Exclude field,
enter a beginning IP address to which you want to deny login access. In theTo field, enter
an ending IP address to which you want to deny login access. All IP addresses
that fall between the beginning and ending IP addresses are denied login access. Click Add. The IP address
or IP address range is added to the Inclusion list.
Select an IP address or IP address range, and click Delete to remove it from the Inclusion list Note: If you entered an invalid IP
address or IP address range, an error message appears, indicating the IP address
is invalid. Click OK. Enter a valid
IP address or IP address range, and click Add again. Note: If Next is selected without adding any IP addresses to either theInclude or Exclude lists,
a warning message appears stating, IP Restricted
Login checkbox will be marked as disabled. Do you want to proceed without
adding any IP Address restrictions? If you select OK, the IP Restricted
Login option on the IP Restricted
Login dialog box is deselected, and the Install Preview dialog box appears.
Click Next. The Install Preview Panel appears. The Install Preview Panel lists the location where the System Management
Homepage is installed, the amount of space the installation requires, and
the summary of the options that you specified during the installation. Click Next. The installation
process is started. Note: During the installation of the
System Management Homepage, Cancel is
disabled. If you click the X in the
upper-right corner of the box, an error message appears, stating the current
operation cannot be canceled. Click Finish to complete
the installation. Note: If this is an upgrade, HP recommends
that you configure System Management Homepage to use operating system authentication
for HP Version Control Agent access to HP Version Control Repository Manager,
and then re-configure the servers running HP Version Control Agent to point
to the new account. If these actions are not taken, pre-7.20 HP Version Control
Agent will access your upgraded HP Version Control Repository Manager through
legacy HTTP Server account access. For more information, refer to Version
Control Installation Guide at http://h18013.www1.hp.com/products/servers/management/agents/documentation.html/. If this is a new install, an operating system account must be created
and configured in the System Management Homepage on this computer and each
of the HP Version Control Agent must be configured to use the new account.
For more information, refer to Version Control Installation Guide at http://h18013.www1.hp.com/products/servers/management/agents/documentation.html/. Note: If HP Systems Insight Manager
is installed after System Management Homepage is installed, the System Management
Homepage 2048-bit key pair will be replaced with the HP Systems Insight Manager1024-bit
key pair.
Installing OpenSSH for a custom install: Click Next to install. Select the destination location using the Browse button, then click OK. Click Next. The OpenSSH Service Log On As User screen appears. Enter your account password. The username and domain fields
are pre-populated. Click Next. The Ready to Install screen appears. Click Install to continue
with the installation, or click Back to
make changes. After installing OpenSSH, click No, I will restart the computer later. Click Finish.
Installing HP Systems Insight Manager for a custom install: Click Next on the HP Systems Insight Manager welcome screen. Read the information screen. Click Next. The Database Configuration screen
appears. Enter the password and database server name. If your database
is local, then the Database Server name field is pre-populated, if your database
is not local you must supply the name of the Database Server. Note: HP Systems Insight Manager creates
a database name with the format “Insight_V42_0_(timestamp).” For
example, “Insight_V42_0_123456.” It then updates database.props
and the DSN with this value. The database.props file can be found in C:\Program Files\HP\Systems InsightManager\Config Click Next. The Destination Location screen appears. Select the destination location by clicking the Browse button. Click OK. Click Next. The Select
Start menu folder appears. Select or enter a different folder name. Click Next. The Ready to Install screen appears. Click Install to install
HP Systems Insight Manager, The Install Progress screen appears, or click Back to
make any changes. Click Finish when the
installation is complete to close the HP Systems
Insight Manager Installer window.
Installing WMI Mapper for a custom install: Click Next to install. The End-User License Agreement screen appears. Click I accept the
agreement. The Choose Setup Type screen
appears. Choose the setup type. Select the destination location using the Browse button. Click OK. Click Next. The Ready to Install screen appears. Click Install to continue
with the installation, or click Back to
make changes. Click Finish.
Installing the ProLiant Essentials PMP for a custom install: Note: The PMP requires HP Systems
Insight Manager 4.1 or later to be installed on your system before installing
the PMP. Note: During the installation of the
PMP, the warning is displayed: As part of
HP Performance Management Pack installation the HP Systems Insight Manager
service must be stopped and restarted. Click OK to stop the service and continue with the PMP installation,
or click Cancel to abort the installation. Click Next. The Database configuration screen appears. Enter your account password. Click Next. Installation
begins. Click Finish to exit
PMP setup.
Installing HP Version Control Repository Manager for a custom install: Click Install to install
HP Version Control Repository Manager. The HP Version
Control Repository Manager setup screen appears. Click Install. Click the Browse button
to select the directory from which HP Version Control Repository Manager will
retrieve support pack information. This directory must be manually created
later if it does not exist. Click OK. Click Next. Select the Enable Automatic Update checkbox to enable automatic downloading of ProLiant Support Packs
and components at a specified interval and time. Click Finish. Installation
of HP Version Control Repository Manager proceeds and completes.
Installing HP ProLiant Essentials Virtual Machine Management Pack for
a custom install: Note: During the installation of the
HP ProLiant Essentials Virtual Machine Management Pack, the warning is displayed:
"As part of . HP ProLiant Essentials Virtual Machine Management Pack installation
the HP Systems Insight Manager service must be stopped and restarted." Click OK to stop the service and continue with the HP
ProLiant Essentials Virtual Machine Management Pack installation, or click Cancel to abort the installation. If you clicked OK the HP ProLiant Essentials Virtual Machine
Management Pack Welcome screen appears. Click Next. TheDatabase configuration screen appears. Enter your account password. Click Next. Installation
begins. Click Finish to exit
HP ProLiant Essentials Virtual Machine Management Pack setup.
If any of the components indicated that a reboot is necessary, reboot
your system. Note: During the Custom Install process,
do not select the reboot now option if
a component requests this. Reboot only after all components have been installed. Click Finish to complete the
component installation that you selected. Note: Click Finish in the Initial Setup HP Systems Insight Manager window,
to complete the installation.
|
Printable version
