Upgrading HP Systems Insight Manager 4.0.1 or 4.1 to HP Systems Insight Manager 4.2 on Linux

Extract the rpm files from the bin file. Be sure you set the permissions to include the right to execute the bin for the following step.

chmod +x *.bin; ./T2416BA_4.02.0.0_Linux.bin --keep --confirm

Note: Refer to Step 5 in the "Installing on Linux - Preparing the System" section for information on setting permissions.

Respond negatively to the prompt to run scripts for an automatic install. The extracted files are placed in an mxserver subdirectory.

Enter cd mxserver.

Install HP Systems Insight Manager using the rpm files:

rpm -U hpsim-C.4.02.0.0-1.i386.rpm hpsim-pgsql-config-C.4.02.0.0-1.i386.rpm

Note: Both files must be installed concurrently with a single command (no carriage return).

Note: This step can be completed successfully in less time. The initialization of the upgrade is done in the background, which takes several minutes. To verify if the upgrade is complete, view the file by executing:

cat/var/opt/mx/logs/initconfig.log