 |
» |
|
|
|
Create a new user account to provide an existing
valid login on the central
management server (CMS) to log into HP Systems Insight Manager.
The login must be authenticated by the CMS. You must know the CMS user account name of the user you are
adding, but you do not need to know the password. To create a new user: Select Options SecurityUsers and AuthorizationsUsers, and click New. The New User section is displayed. In the Login name (on central management server) field, enter the operating system login account name to be used
to log into HP Systems Insight Manager. This field is required. Note: The user cannot log into HP
Systems Insight Manager if the account is not a valid login, and the account
is not validated until the user tries to log into HP Systems Insight Manager
the first time. In the Domain (Windows domain for login name) field, enter the Windows domain name for the login name if running
a Windows operating system. In the Full name field, enter the
user's full name. In the Phone number field, enter
the user's phone number. In the E-mail address field, enter
the user's e-mail address. In the Copy all authorizations of this user
or [template] field, select a template or login that already has
the predefined authorizations that you want to assign
to the login account you are creating. In the Central management server configuration
rights section, select the level of authority to assign to the
new user from the following options: full, allowed to modify all central
management server settings. Allows the user total control of the database. Users
can run discovery of systems and data collection define users
and authorizations; set Cluster Monitor configuration; configure licensing and protocol settings; and
create, modify, delete, and run reports, snapshot comparisons, tools, custom
commands, events, automation tasks, and so on. limited, allowed to create/modify/delete
all reports and their own tools. Allows the user to create new
reports, edit any reports, and delete any reports (including the predefined
reports). none, no configuration of central management
server allowed. Allows the user to view and run predefined reports
on the CMS and all managed systems. However, the user has no configuration
rights on the CMS or on the managed systems.
Under the Login IP Address Restrictions section,
in the Inclusion ranges field, enter
the IP addresses of the systems that you want this user to be able to use
as a client browsing into this CMS. If you list multiple IP addresses, separate
them with a semicolon (;). Each range is a single IP address or two IP addresses
separated by a dash (-). The IP addresses must be entered in the standard
dotted form, for example, 15.1.54.133. Any spaces surrounding the semicolons
or dashes are ignored. Spaces are not allowed within a single IP address in
dotted form. Enter 0.0.0.0 to prevent a user from logging in through a remote
system. In the Exclusion ranges field,
enter the IP address of the systems that should be excluded from this user
as clients browsing into this CMS. Use the same format in the previous step
for Inclusion ranges. Note: Be sure to verify that your
inclusion and exclusion ranges do not overlap. Note: Steps 11 though 15 are for Windows
systems only. Under the Pager Information section,
in the Phone number field, enter the
pager phone number of the user associated with this user account if you are
using a Windows operating system. If the Phone number field is left blank, the paging information is not saved. In the PIN number field, enter
the PIN number associated with the pager phone number. In the Message length field, select
how many characters can be accepted in the paging message from the dropdown
list. In the Baud rate field, select
the appropriate baud rate for the pager from the dropdown list. In the Data format field, select
the appropriate data format for the pager from the dropdown list. Click OK to save and close the New User section. You can click Apply to save and keep the New User section open, or click Cancel to
cancel the creation of this user. The new user account is created.
|
Printable version
