 |
» |
|
|
|
|  | |
HP-UX 11i v2 supports only the 64-bit version of the HP-UX
kernel. This release of HP-UX 11i v2 release fully supports the
following HP 9000 servers, HP Integrity servers, and HP workstations,
as well as the new PA-8900 processor. | | | |  | NOTE: Additional information regarding these servers and workstations
can be found at the following Web sites: | | | | |
PA-RISC
Systems. HP 9000
rp24x0 and rp34x0 series HP 9000 rp44x0 and rp54x0 series HP 9000 rp74x0 and rp84x0 series 64-bit A-Class, L-Class,
and N-Class servers
Itanium®-based Systems. HP Integrity
cx2600 server HP Integrity rx16x0 server HP Integrity rx26x0 server HP Integrity rx4640 server HP Integrity rx5670 server HP Integrity rx7620/rx8620
servers HP Integrity Superdome server HP zx2000 and HP zx6000 workstations
(see following note)
| | | |  | IMPORTANT: The HP-UX 11i v2 May 2005 release is the last release
supported on the Itanium®-based zx2000
and zx6000 workstations. These workstations have been discontinued
as of September 2004. | | | | |
Unsupported Servers
and Workstations | |
HP-UX 11i v2
is not supported on the following Itanium-1 based systems: HP-UX 11i v2 is not supported
on the following PA-RISC Servers: All
32-bit servers (including 32-bit A-Class servers A180 and A180C)
HP-UX 11i v2 is not supported on PA-RISC Workstations.
HP recommends that PA-RISC Workstation customers use HP-UX 11i v1. PA-RISC Workstations include the following: B132L, B132L+, B160L, B180L C100, C110, C160L, C160,
C180, C200, C240, C360 C3000, C3600, C3650, C3700,
C3750, C8000 J200, J210, J210XC, J280,
J282, J2240 J5000, J5600, J7000, J6000,
J6700, J6750 705, 710, 712, 715/33, 715/50,
715/75, 715/64, 715/80, 715/100, 715/100XC 720, 730, 735, 750, 755,
725/50, 725/75, 725/100
Finding
Firmware Information | |
Firmware changes frequently. Make sure your system has the
latest firmware installed to support, for example, the latest versions
of I/O adapters, mass storage devices, and devices used when you
install from media or a network depot. For a matrix
of system firmware for PCI I/O adapters and HP-UX 11i boot support, as
well as the minimum firmware requirements for HP-UX 11i v2, refer
to the documents at http://docs.hp.com/en/hw.html#System%20Firmware. For the latest HP-UX 11i firmware updates, go to
the IT Resource Center (ITRC) Web site at http://itrc.hp.com. Log in to your appropriate region. Click maintenance
and support (for hp products), then find
individual patches and firmware. If you have to patch your firmware, the ITRC provides a patch
database to search, as well as patch documentation that provides
information on how to patch the firmware. HP also provides the Subscriber’s Choice,
which enables you to sign up to receive email notices for firmware
updates. At the ITRC Web site, click maintenance
and support (for hp products), then support
information digests.
|
Printable version
