The HP Insight Management Agent packages are installed on your system by using the software installer located on the HP Support Pack media of the HP Integrity Essentials Foundation Pack for Linux. Specific instructions for installing from the HP Support Pack media are found in Chapter 5, “Installing and Using the HP Support Pack Media”, in the HP Integrity Essentials Foundation Pack for Linux User's Guide located in the /docs directory on the HP Support Pack media of the HP Integrity Essentials Foundation Pack for Linux and at the HP Technical Documentation Web site at:
http://www.docs.hp.com/en/5991-7635/index.html
Ensure that you have the latest HP Insight Management Agent packages as described in “Obtaining the HP Insight Management Agent Package”. The installer handles any dependencies and installs any additional required software when installing these packages.
During the process of installing the HP Insight Management Agent packages, default values are used to create an initial configuration. These default configuration values are stored in /etc/snmp/snmpd.conf.
Once the installation completes, the SNMP daemon and the HP Insight Management Agent packages start and messages similar to the following are displayed on your server:
 |
===================================================================
The following file(s) contained the prior snmpd configuration:
/etc/snmp/snmpd.conf
They have been saved and will be restored when hpima is removed.
New configuration is stored in /etc/snmp/snmpd.conf
===================================================================
(Re)starting the SNMP daemon, configured to support the HP Insight
Management Agents
Start SNMP AgentX Intermediary ‘hpimaX’: [ OK ]
Start Foundation Peer Daemon ‘hpimafdtnpeerd’: [ OK ]
Start Foundation Host Agent ‘hpimahostd’: [ OK ]
Start Foundation Threshold Agent ‘hpimathreshd’: [ OK ]
Start Server Peer Daemon ‘hpimasvrpeerd’: [ OK ]
Start Server Health Agent ‘hpimahealthd’: [ OK ]
Start Server Standard Equipment Agent ‘hpimastdeqd’: [ OK ]
Start Storage Peer Daemon ‘hpimastorpeerd’: [ OK ]
Start Storage Event Agent ‘hpimaeventd’: [ OK ]
Start Storage Intelligent Disk Array Agent ‘hpimaidad’: [ OK ]
Start Storage SCSI Agent ‘hpimascsid’: [ OK ]
Start Storage Fibre Channel Agent ‘hpimafcad’: [ OK ]
Start NIC Peer Daemon ‘hpimanicpeerd’: [ OK ]
Start NIC Agent ‘hpimanicd’: [ OK ]
Start Event E0 Trap Generator ‘hpimaE0traps’: [ OK ]
HP Insight Management Agents are enabled.
The hpima RPM has installed successfully.
|
|
Errors are logged in /var/log/hp/hpima/. Although the agents run, no traps are sent. For a definition of a trap destination, see “Concepts and Terms to Understand”.
Printable version
