 |
» |
|
|
|
Individual hardware components in an HP XC System Software have firmware dependencies. These dependencies are listed in Table 3-1. Before installing the HP XC System Software, verify the device firmware against the latest validated firmware revisions listed at: http://www.hp.com/techservers/clusters/xc_clusters.html Your hardware components must meet the minimum firmware revision levels shown on this Web site. Procedures describing how to verify or upgrade the firmware for each component are found in the associated hardware documentation.
Table 3-1 Firmware Dependencies | Hardware Device | Dependencies |
|---|
| HP ProLiant DL140 G2 server | Lights-out 100i management (LO–100i), system BIOS | | HP ProLiant DL360 G4 server | Integrated lights out (iLO), system BIOS | | HP ProLiant DL380 G4 server | iLO, system BIOS | | HP ProLiant DL145 server | LO–100i, system BIOS | | HP ProLiant DL145 G2 server | LO-100i, system BIOS | | HP ProLiant DL385 server | iLO, system BIOS | | HP ProLiant DL585 server | iLO, system BIOS | | HP Integrity rx1620 server | Management Processor (MP), BMC, Extensible Firmware Interface (EFI), system | | HP Integrity rx2600 server | MP, BMC, EFI, system | | HP Integrity rx2620 server | MP, BMC, EFI, system | | HP Integrity rx4640 server | MP, BMC, EFI, system | | ProCurve 2824 switch | Firmware revision | | ProCurve 2848 switch | Firmware revision | | ProCurve 2650 switch | Firmware revision | | ProCurve 2626 switch | Firmware revision | | Myrinet interconnect | Firmware revision | | Myrinet interface card | Interface card revision | | QsNetII interconnect | Firmware revision | | InfiniBand interconnect | Firmware revision |
|
Printable version
