Description |
 |
Linux RAID configuration utility for LSI controllers; it is a counterpart of cpqacuxe. In SSTK, it is used for applying RAID 1 in LSI 1068 controllers.
The <controller #> is a number between 0 and 255.
Table 6-1 Commands
Commands | Description |
|---|
AUTO | Create an IR volume without specifying drives. |
CREATE | Create an IR volume. |
DELETE | Set controller configuration to factory defaults. |
DISPLAY | Display controller, volume and physical device information. |
ENABLEIR | Enable the IR capability of the controller. |
DISABLEIR | Disable the IR capability of the controller. |
FORMAT | Perform a low-level format of a SCSI hard disk drive. |
HOTSPARE | Make drive a hot spare. |
LIST | Lists all available LSI adapters. This command does not require <controller #>. |
LOCATE | Turn ON and OFF a drive's Identify LED. |
STATUS | Display current volume status information. |
SETOFFLINE | Bring a hard disk offline (in IM/IME volumes). |
SETONLINE | Bring a hard disk online. |
The <parameters> are command specific values.
To obtain command help, you can use cfggen <controller #> <command>.