Perform
this task only if the hardware configuration contains HP server blade enclosures.
Bypass this task for all other hardware models.
If the HP XC system contains HP server blades housed in enclosures,
HP recommends that you configure the enclosures to send their SNMP traps to
the management server IP alias. After doing so, all SNMP traps are processed
by the snmptrapd service and subsequently logged to syslog by
the snmptt service. The syslog-ng service
logs all traps to the /hptc_cluster/adm/log/consolidated.log file and
the /hptc_cluster/adm/logs/snmptraps.log file. This enables
Nagios to generate alerts for all enclosure traps posted with a priority of
WARNING or greater.
Configure the enclosures to send their SNMP traps to the management
server IP alias:
# manage_enclosure addtrap
enc2n-enc09USE6281BJX: Added SNMP trap receiver destination IP_address |
Verify that the SNMP trap destination has been set correctly on
the enclosures:
# manage_enclosure listtrap
enc2n-enc09USE6281BJX:
IP_address |
Proceed to “Task 16: Configure SNMP Trap Destination for Modular Cooling System
Devices”.
Printable version
