Review the following reports for the HBA card information after
installation.
Example 3-1 Example of the “fcmsutil /dev/fclp2” command
# fclputil /dev/fclp2
Vendor ID is = 0x10df
Device ID is = 0xf100
PCI Sub-system Vendor ID is = 0x103c
PCI Sub-system ID is = 0x1719
Chip version = 3
Firmware Version = 1.10A5 SLI-3 (U3F1.10A5)
EFI Version = UU6.03A7
EFI Boot = ENABLED
Driver-Firmware Dump Available = NO
Driver-Firmware Dump Timestamp = N/A
Topology = PTTOPT_FABRIC
Link Speed = 4Gb
Local N_Port_id is = 0x010400
Previous N_Port_id is = None
N_Port Node World Wide Name = 0x20000000c983c65c
N_Port Port World Wide Name = 0x10000000c983c65c
Switch Port World Wide Name = 0x200400051e074d76
Switch Node World Wide Name = 0x100000051e074d76
Driver state = ONLINE
Hardware Path is = 0/4/0/0/0/0
Maximum Frame Size = 2048
Driver Version = @(#) FCLP: PCIe Fibre Channel driver (FibrChanl-02), B.11.31.0903, Mar 16 2008, FCLP_IFC (3,2) |
This card is capable of running at bus speeds up to PCIe x8
link width. The actual link width is displayed as the PCI Mode.
Example 3-2 Example of Vital Product Data (VPD) after installation
# fcmsutil /dev/fclp2 vpd
V I T A L P R O D U C T D A T A
--------- ------------- -------
Product Description : "HP BLc Emulex LPe1205-HP 8Gb FC"
Part number : "456973-001"
Part Serial number : "MY19114XUZ"
Engineering Date Code : "A-4904"
Mfd. Date : "4911"
Misc. Information : "PW=10W; PCIE X8 GEN 2"
ROM Firmware version : "1.10A5 SLI-3 (U3F1.10A5)"
EFI version : "UU6.03A7" |
Example 3-3 Example of “ioscan” report of agile (new-style)
hardware path after installation (HP-UX 11i v3 only)
 |
ioscan -fNH 0/4/0/0/0/0
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
fc 2 0/4/0/0/0/0 fclp CLAIMED INTERFACE HP 456972-B21 8Gb PCIe 2-port LPe1205 FC Mezzanine Adapter
tgtpath 4 0/4/0/0/0/0.0x500508b300924e81 estp CLAIMED TGT_PATH fibre_channel target served by fclp driver, target port id 0x11200
lunpath 54 0/4/0/0/0/0.0x500508b300924e81.0x0 eslpt CLAIMED LUN_PATH LUN path for ctl5
tgtpath 3 0/4/0/0/0/0.0x500508b300925641 estp CLAIMED TGT_PATH fibre_channel target served by fclp driver, target port id 0x11100
lunpath 28 0/4/0/0/0/0.0x500508b300925641.0x0 eslpt CLAIMED LUN_PATH LUN path for ctl2
lunpath 30 0/4/0/0/0/0.0x500508b300925641.0x1000000000000 eslpt CLAIMED LUN_PATH LUN path for disk30
lunpath 53 0/4/0/0/0/0.0x500508b300925641.0x2000000000000 eslpt CLAIMED LUN_PATH LUN path for disk54
lunpath 52 0/4/0/0/0/0.0x500508b300925641.0x3000000000000 eslpt CLAIMED LUN_PATH LUN path for disk53
lunpath 51 0/4/0/0/0/0.0x500508b300925641.0x4000000000000 eslpt CLAIMED LUN_PATH LUN path for disk52
lunpath 50 0/4/0/0/0/0.0x500508b300925641.0x5000000000000 eslpt CLAIMED LUN_PATH LUN path for disk51
|
|
Example 3-4 Example of “ioscan” report of legacy hardware
path after installation
|
# ioscan -fnH 0/4/0/0/0/0
Class I H/W Path Driver S/W State H/W Type Description
===========================================================================
fc 2 0/4/0/0/0/0 fclp CLAIMED INTERFACE HP 456972-B21 8Gb PCIe 2-port LPe1205 FC Mezzanine Adapter
/dev/fclp2
fcp 1 0/4/0/0/0/0.1 fclp_fcp CLAIMED INTERFACE FCP Domain
ext_bus 6 0/4/0/0/0/0.1.17.0.0 fclp_vbus CLAIMED INTERFACE FCP Array Interface
target 4 0/4/0/0/0/0.1.17.0.0.0 tgt CLAIMED DEVICE
ctl 7 0/4/0/0/0/0.1.17.0.0.0.0 sctl CLAIMED DEVICE HP MSA CONTROLLER
/dev/rscsi/c6t0d0
disk 55 0/4/0/0/0/0.1.17.0.0.0.1 sdisk CLAIMED DEVICE HP MSA VOLUME
/dev/dsk/c6t0d1 /dev/rdsk/c6t0d1
disk 56 0/4/0/0/0/0.1.17.0.0.0.2 sdisk CLAIMED DEVICE HP MSA VOLUME
/dev/dsk/c6t0d2 /dev/rdsk/c6t0d2
disk 57 0/4/0/0/0/0.1.17.0.0.0.3 sdisk CLAIMED DEVICE HP MSA VOLUME
/dev/dsk/c6t0d3 /dev/rdsk/c6t0d3
disk 58 0/4/0/0/0/0.1.17.0.0.0.4 sdisk CLAIMED DEVICE HP MSA VOLUME
/dev/dsk/c6t0d4 /dev/rdsk/c6t0d4
disk 59 0/4/0/0/0/0.1.17.0.0.0.5 sdisk CLAIMED DEVICE HP MSA VOLUME
/dev/dsk/c6t0d5 /dev/rdsk/c6t0d5 |
|
Printable version
