Installing HPjmeter on HP-UX

Installation requires root access or permission from root previously configured into swacl. Decide which HPjmeter components you want to install and where, and do so using the following commands:

To install the console using Software Distributor (SD):

$ sudo swinstall -s depot_path_and_name HPjmeterClient 

To install the node agent and JVM agent using SD:

$ sudo swinstall -s depot_path_and_name HPjmeterMN  

To install all components using SD:

$ sudo swinstall -s depot_path_and_name \* 

/opt/hpjmeter/lib includes subdirectories for 32– and 64–bit versions of agent shared libraries appropriate for the architecture of the system. Installation also starts the daemon process called nodeagent , which is required for communication between the JVMs and the management console.

Adding HPjmeter to the HP Systems Insight Manager Interface

The software package that allows you to launch HPjmeter from the HP Systems Insight Manager interface is installed using the command

$ /usr/sbin/swinstall -s location_of_HPjmeter-SIM_depot

	NOTE: For HPjmeter to work properly with HP Systems Insight Manager, the HP Systems Insight Manager file set SysMgmtServer.MX-CORE-ARCH must be installed on the same central management server (CMS) where you plan to install HPjmeter.

To complete this installation, do the following:

1. After installation completes, start HP Systems Insight Manager.

2. Run the script

   $ /opt/hpjmeter/bin/sim_client_init

   to configure HP Systems Insight Manager with the appropriate HPjmeter console files.

Uninstalling HPjmeter from HP Systems Insight Manager

When uninstalling the console from HP Systems Insight Manager, do the following:

1. Remove HPjmeter files with SD.

2. Check that HP Systems Insight Manager is running.

3. Run the script

   $ /opt/hpjmeter/bin/sim_client_cleanup

   to remove HPjmeter files from HP Systems Insight Manager.

Optionally, you can do step 1 after steps 2 and 3, with the same result.