 |
» |
|
|
|
Before installing the Smart Array Series Controller, be sure the following hardware and software prerequisites are met: Confirm that your server and HP-UX operating system version are supported by the controller. Use the swlist command to determine the HP-UX version you are using. For example: # swlist | grep OE
HPUX11i-OE-MC B.11.31.0709 HP-UX Mission Critical Operating
Environment |
Table 1-1 lists the minimum HP-UX version requirements for each controller: Table 1-1 Minimum Required HP-UX Versions for Smart Array SAS RAID Controllers | Controller | Operating System | Minimum Required Version |
|---|
| Smart Array P400 | HP-UX 11i v2 | B.11.23.0612 | | HP-UX 11i v3 | B.11.31.0709 | | Smart Array P800 | HP-UX 11i v2 | B.11.23.0712 | | HP-UX 11i v3 | B.11.31.0712 |
For information about the supported server models and HP-UX versions, see the HP Smart Array RAID Controllers Support Matrix at: http://docs.hp.com/en/netcom.html Read the RAID-01 (ciss) HP Smart Array Controller Release Notes for your HP-UX version to check for any known problems, required patches, or other information you need for installation. Make sure you have superuser (root) privileges. Make sure the /usr/sbin, /sbin, and /usr/bindirectories are in your PATH statement by logging in as root and entering the following command: #echo $PATH
|
Printable version
