Jump to content United States-English
HP.com Home Products and Services Support and Drivers Solutions How to Buy
» Contact HP
More options
HP.com home
 Ignite-UX Quick Start Guide: Create an Ignite-UX Server and Cold-Install Clients > Chapter 1 Setting up an Ignite-UX Server

Configure the System as an Ignite-UX Server
» 

Technical documentation

Complete book in PDF
» Feedback
Content starts here

 » Table of Contents

 » Glossary

 » Index

spacerspacerspacer
spacer
spacer
  		 
 

  1. NFS export the directory /var/opt/ignite/clients so you can control the installation process from the server and store configuration files and manifest information on the server. On successful completion of the setup_server command, the message Program completed successfully. will be displayed.

    If you wish, you may safely complete this section before “Create the HP-UX OE Configuration Information on the Ignite-UX Server”.

    Procedure
    # /opt/ignite/lbin/setup_server -n

  2. Enable the bootpd daemon.

    Procedure

    1. Edit the /etc/inetd.conf file:

      # vi /etc/inetd.conf

    2. Remove the comment character (#) from the bootpd line:

      bootps dgram udp wait root /usr/lbin/bootpd bootpd

    3. Save the /etc/inetd.conf file and exit vi:

      :wq

    4. Make the inetd daemon reread the /etc/inetd.conf file:

      # inetd -c

    Explore

    An overview of how network booting works is available in the section on making configuration decisions for Ignite-UX servers in the Ignite-UX Administration Guide, and in the Ignite-UX Installation Booting white paper. Both documents can be found at http://docs.hp.com/en/IUX/infolib.html



Create the HP-UX OE Configuration Information on the Ignite-UX Server
  		 


Chapter 2 Cold-installing a Client Across the Network  
Printable version
Privacy statement Using this site means you accept its terms Feedback to webmaster
© 2007, 2008 Hewlett-Packard Development Company, L.P.