Providers

SFM providers can be classified as instance providers or as indication providers. This section describes these providers.

Instance Providers

On request, an SFM instance provider dynamically queries the local or remote system for the property information described in Table 1-1 and reports the information to the CIMOM.

Table 1-1 Instance Providers

Instance Provider

Description

CPU

The CPU Instance Provider retrieves the following types of information:

Logical processor information, such as:
- Current clock speed
- Processor family
- Processor status information, including configuration and deconfiguration, failure status, and active and inactive status
- Load percentage
Physical processor chip information, such as chip revisions and architecture revisions
Location details, such as:
- Location attributes such as cabinet number, cell number, slot number, and so on. Only information for filled slots is available.
- Processor IDs

The CPU Instance Provider depends on the EMS Wrapper Provider to update the processor inventory.

Memory

The Memory Instance Provider retrieves the following types of information:

Memory slot information
Memory module information, such as:
- Serial number
- Part number
- Memory capacity
- Module form factor
- Module status (for example, configuration status, failure status)

The Memory Instance Provider depends on the EMS Wrapper Provider to update the memory inventory.

Environmental

The Environmental Instance Provider retrieves information about the following hardware components:

Fans
Power supply
Bulk power supply
AC input lines

Filter Metadata (FMD)

The FMD Instance Provider does the following:

Provides the ability to predefine a filter in a repository
Ensures that chosen indications are logged to the Event Archive
Creates HP-advised subscriptions when SFM is installed

Firmware Revision

The Firmware Revision Provider retrieves the following types of information:

System firmware revision
Management Processor (MP) firmware revision

Disk

The Disk Instance Provider retrieves the following types of information from the direct attached disk drives, such as the SCSI drives:

Consolidated health status
Inventory information

Management Processor

Retrieves information about the management processor on the system.

Enclosure

The Enclosure Instance Provider retrieves the following types of information:

Onboard Administrator (OA) description
OA IP address
OA MAC address
URL to launch the OA




	NOTE: The Enclosure Instance Provider is available on HP Integrity BL860c Server Blade and HP Integrity BL870c Server Blade only.

RecordLog

Enables event analysis tools such as Web-Based Enterprise Services (WEBES) to access details of indications generated by the SFMIndicationProvider that are available in the SFM database, for event analysis.




	NOTE: There is no GUI for the Record Log Provider. You can only enumerate instances using the CLI.

Indication Providers

SFM includes two indication providers, the EMS Wrapper Provider and the SFMIndicationProvider.Table 1-2 describes the SFM indication providers.

Table 1-2 Indication Providers

Indication Provider Description

EMS Wrapper Provider

The EMS Wrapper Provider does the following:

Converts hardware events generated by the EMS Hardware Monitors into WBEM indications.
Reports the WBEM indications to the CIMOM. Using a WBEM-based management application, such as HP SIM, you can subscribe to and receive Event Monitoring Service (EMS) events generated on a remote system. On the system on which SFM is installed, you can use an SFM tool, called Evweb, to view and administer events through the HP SMH interface.

SFMIndicationProvider

The SFMIndicationProvider generates indications that are compliant with the WBEM standards. On Itanium-based systems, it replaces the following EMS monitors:

cmc_em
cpe_em
memory_ia64
fpl_em
ia64_corehw

On PA-RISC-based systems, it replaces the following EMS monitors:

fpl_em
ia64_corehw

You can choose to use either the SFMIndicationProvider or the EMS monitors that it replaces, to monitor your hardware. The remaining EMS monitors continue to function as usual irrespective of whether you choose the SFMIndicationProvider or the EMS monitors that it replaces. If you choose the SFMIndicationProvider, it does the following:

Generates WBEM indications equivalent to the events that the monitors it replaces generate.
Reports these WBEM indications to the CIMOM.

The SFMIndicationProvider is a standards-based solution that works independent of the EMS framework. The WBEM indications generated by the SFMIndicationProvider may contain additional data that are not present in the EMS event details. The WBEM indications can be reported to the EMS clients through the EMS framework.




	NOTE: The following apply to indication providers: The terms events and indications are used interchangeably. The SFMIndicationProvider is introduced in the June 2006 release on HP-UX 11i v2. Releases prior to the June 2006 release do not include this indication provider.

Providers

Technical documentation

» Table of Contents

» Glossary

» Index

Instance Providers

Indication Providers