 |
» |
|
|
|
A- adduser command, Create Local User Accounts
- administration
network
- activating, Discovering Hardware Configurations With Server Blades and More Than One Enclosure
- testing, Task 3: Run the OVP to Verify Software and Hardware Components
- using as interconnect network, discover Command Options
- administrator
password ProCurve switch, Information Required by the discover Command
- Apache self-signed
certificate, Information Required by the cluster_config Utility
- configuring, Task 10: Respond to Configuration Questions
- avail_node_management
role, Avail_node_management Role
- availability role, Availability Role
- availability set
- choosing nodes as members, Choosing Nodes as Members of Availability Sets
- configuring with cluster_config, Task 8: Configure Availability Sets
- defined, What Is Improved Availability?
- availability
tool, What Is Improved Availability?
- Heartbeat, Choosing an Availability Tool
- Serviceguard, Choosing an Availability Tool
- starting, Task 15: Start Availability Tools
- verifying operation, Task 2: Verify Availability Tools
B- back up
- CMDB, Task 6: Create a Baseline Copy of the Database
- CMDB before cluster_config, Task 7: Run the cluster_config Utility to Configure the System
- SFS server, Task 3: Prepare Existing HP XC Systems, Task 1: Prepare for the Upgrade
- base image
- removing, Task 10: Respond to Configuration Questions
- base image file, Task 10: Respond to Configuration Questions
- base_addr.ini file, Task 2: Change the Default IP Address Base (Optional)
- benchmark tests, Task 3: Run the OVP to Verify Software and Hardware Components
- BMC password
- HP
Integrity systems, Set the BMC Password on HP Integrity Systems (Required)
- boot command
- for Kickstart installation, Installation Procedure For A Non-Blade Server Head Node
- /boot/efi
file system, Default File System Layout and Disk Partition Sizes
- /boot file system, Default File System Layout and Disk Partition Sizes
C- c3000 enclosure
- discoving, Discovering Hardware Configurations With Server Blades And A Single Enclosure
- cannot connect to MySQL database, Cannot Connect to Database During Configuration
- checklist of installation tasks, Installation and Configuration Checklist
- chip
architecture, Task 1: Gather Information Required for the Installation
- Cisco switch, General Considerations
- cisco_hsm role, Cisco_hsm Role
- client node
- customizing disk partitions, Customizing Client Node Disks
- default disk partition layout, Customize Client Node Disk Partitioning
- does not boot, Client Node or Nodes Do Not Network Boot
- cluster configuration
- cluster_config utility, Task 7: Run the cluster_config Utility to Configure the System
- modifying, Overview of the cluster_config Command-Line Menu
- cluster configuration menu, Using the cluster_config Command-Line Menu
- cluster platform chip architecture
- CP3000, Task 1: Gather Information Required for the Installation
- CP3000BL, Task 1: Gather Information Required for the Installation
- CP4000, Task 1: Gather Information Required for the Installation
- CP4000BL, Task 1: Gather Information Required for the Installation
- CP6000, Task 1: Gather Information Required for the Installation
- cluster_config utility, Task 7: Run the cluster_config Utility to Configure the System
- command–line
menu, Overview of the cluster_config Command-Line Menu
- configuring improved availability, What Is Improved Availability?
- features, Task 7: Run the cluster_config Utility to Configure the System
- information required by, Task 1: Prepare for the System Configuration
- invoking, Task 7: Run the cluster_config Utility to Configure the System
- log files, System Configuration and Imaging Log Files
- modify Ethernet connection, Configuring an Ethernet Connection
- options for software
upgrade, Task 8: Configure the System and Propagate the Golden Image
- prompts, Task 10: Respond to Configuration Questions
- troubleshooting, Troubleshooting the Cluster Configuration Process
- cluster_prep command, Task 3: Run the cluster_prep Command to Prepare the System
- information required by, Task 1: Prepare for the System Configuration
- CMDB
- backing up, Task 6: Create a Baseline Copy of the Database
- creating
and initializing, Task 7: Run the cluster_config Utility to Configure the System
- documentation, Task 6: Create a Baseline Copy of the Database
- CMF, Enabling telnet on iLO and iLO2 Devices
- assigning role for, Console_network Role
- daemon, Discover All Nodes and Enclosures
- common role, Common Role
- compilers, Install Compilers
- compute node
- maximizing file system performance, Example 4: Customizing Partition Sizes to Maximize File System Performance
- testing, Task 3: Run the OVP to Verify Software and Hardware Components
- compute role, Compute Role
- configuration
- of services, Customize Service and Client Configurations
- configuration and management
database (see CMDB)
- configuration data
- creating baseline report, Task 7: Create a Baseline Report of the System Configuration
- console management facility (see CMF)
- console port
- discover process hangs, Discovery Process Hangs While Discovering Console Ports
- IP address not obtained, Some Console Ports Have Not Obtained Their IP Addresses
- not discovered, Not All Console Ports Are Discovered
- user
name and password, Information Required by the discover Command
- console_network role, Console_network Role
- CPU resources
- LSF and SLURM do not match, Troubleshooting the OVP
- CPU usage
- testing, Task 3: Run the OVP to Verify Software and Hardware Components
D- database
- cannot
connect to MySQL server, Cannot Connect to Database During Configuration
- database
administrator password, Information Required by the cluster_prep Command
- database backup, Task 6: Create a Baseline Copy of the Database
- database server, Information Required by the cluster_config Utility
- configuring, Task 10: Respond to Configuration Questions
- default
- disk partition sizes, Default File System Layout and Disk Partition Sizes
- file system layout, Default File System Layout and Disk Partition Sizes
- node role assignments, Default Node Role Assignments
- system configuration, Description of Node Roles, Services, and the Default Configuration
- dense
node names, Internal Node Naming
- development environment tools, Install Third-Party Software Products
- disabled node inserted in database, Not All Nodes Are Discovered
- discover
command, Task 5: Run the discover Command to Discover Hardware Components
- command line options, Discovering Non-Blade Hardware Configurations
- enclosures, Discover All Nodes and Enclosures
- flowchart, Troubleshooting the Discovery Process
- HP ProLiant DL140, Discovering Non-Blade Hardware Configurations
- HP ProLiant DL145 G2, Discovering Non-Blade Hardware Configurations
- HP ProLiant DL145 G3, Discovering Non-Blade Hardware Configurations
- information required by, Task 1: Prepare for the System Configuration
- no node found, Not All Nodes Are Discovered
- no switch found, Discovering Non-Blade Hardware Configurations
- nodes, Discover All Nodes and Enclosures
- - -oldmp option, Information Required by the discover Command
- switches, Discovering Hardware Configurations With Server Blades and More Than One Enclosure
- troubleshooting, Troubleshooting the Discovery Process
- disk configuration file, Statically Configuring Client Node Disks
- disk partition
- default file
system layout, Default File System Layout and Disk Partition Sizes
- default sizes on installation disk, Default File System Layout and Disk Partition Sizes
- maximum size of, Default File System Layout and Disk Partition Sizes
- on client nodes, Customize Client Node Disk Partitioning, Customizing Client Node Disks
- disk_io role, Disk_io Role
- distribution media, Kickstart Installation Process
- DNS
- configuration, Task 6: Arrange for IP Address Assignments and Host Names
- search path, Information Required by the cluster_prep Command
- server, Information Required by the cluster_prep Command
- documentation
- additional publications, Related Information
- compilers, Related Information
- firmware list, HP XC and Related HP Products Information
- FlexLM, Related Information
- HowTo, HP XC and Related HP Products Information
- HP XC System Software, HP XC and Related HP Products Information
- Linux, Related Information
- LSF, Related Information
- manpages, Manpages
- master firmware list, HP XC and Related HP Products Information
- Modules, Related Information
- MPI, Related Information
- MySQL, Related Information
- Nagios, Related Information
- pdsh, Related Information
- reporting errors in, HP Encourages Your Comments
- rrdtool, Related Information
- SLURM, Related Information
- software RAID, Related Information
- Supermon, Related Information
- syslog-ng, Related Information
- SystemImager, Related Information
- TotalView, Related Information
- download site
- for patches, Task 4: Install Patches or RPM Updates
- DVD, Kickstart Installation Process
E- elanhosts file, Perform SLURM Postconfiguration Tasks
- enclosure
- discovering, Discover All Nodes and Enclosures
- enabling SNMP trap monitoring, Task 16: Configure SNMP Trap Destination for Enclosures
- environment variable
- LSF, LSF and SLURM Environment Variables
- SLURM, LSF and SLURM Environment Variables
- /etc/hptc-release, Supported Upgrade Paths
- Ethernet connection
- configuring
on any node, Configuring an Ethernet Connection
- configuring on head
node, Information Required by the cluster_prep Command
- Ethernet connection on head node, Task 3: Run the cluster_prep Command to Prepare the System
- external role, External Role
H- hardware preparation, Task 4: Prepare the Hardware
- head node
- configuring Ethernet connection, Information Required by the cluster_prep Command, Task 3: Run the cluster_prep Command to Prepare the System
- default disk partition
layout, Default File System Layout and Disk Partition Sizes
- default role assignments, Default Node Role Assignments
- golden client, Kickstart Installation Process
- installation, Kickstart Installation Process
- mirroring, Information Required for the Kickstart Installation Session
- naming
convention, Head Node Naming
- Heartbeat, Choosing an Availability Tool
- host name
- guidelines, Host Name Guidelines
- HowTo
- website, HP XC and Related HP Products Information
- HP documentation
- providing feedback for, HP Encourages Your Comments
- HP Integrity
- BMC/IPMI password, Set the BMC Password on HP Integrity Systems (Required)
- HP MPI
- defined, HP XC Software Stack
- HP ProLiant DL140
- discovering, Discovering Non-Blade Hardware Configurations
- HP ProLiant DL145 G2
- discovering, Discovering Non-Blade Hardware Configurations
- HP ProLiant DL145 G3
- discovering, Discovering Non-Blade Hardware Configurations
- HP Remote Graphics Software (see RGS)
- HP Scalable Visualization
Array (see SVA)
- HP Serviceguard (see Serviceguard)
- HP StorageWorks Scalable
File Share (see SFS)
- HP XC system software
- defined, HP XC Software Stack
- determining installed version, Supported Upgrade Paths
- installation process, Kickstart Installation Process
- software stack, HP XC Software Stack
- hpasm, Common Role
- hptc-ire-serverlog service, The hptc-ire-serverlog Service Might Not Start
- /hptc_cluster
- failure to mount, /hptc_cluster File System Does Not Mount
- /hptc_cluster file system, Default File System Layout and Disk Partition Sizes
- configuring improved
availability for, Assigning Node Roles For Improved Availability
- creating, Create the /hptc_cluster File System
- making and mounting, Create the /hptc_cluster File System
- where to install, Information Required for the Kickstart Installation Session
I- iLO device
- enabling telnet, Enabling telnet on iLO and iLO2 Devices
- iLO2
- virtual
console and media features, Installation Procedure For A Server Blade Head Node
- iLO2 device
- enabling telnet, Enabling telnet on iLO and iLO2 Devices
- image file, Task 10: Respond to Configuration Questions
- image
server, System Imaging Process
- imaging, Configuring and Imaging the System, System Imaging Process
- monitoring, How To Monitor An Imaging Session
- troubleshooting, Troubleshooting the Imaging Process
- imaging log file, System Configuration and Imaging Log Files
- imaging time out, startsys Command-Line Options Based on Hardware Configuration, Upgrade startsys Command-Line Options Based on Hardware Configuration
- improved availability
- associating
nodes in availability sets, Choosing Nodes as Members of Availability Sets
- availability tools, Choosing an Availability Tool
- configuration procedure, How to Configure Improved Availability
- configuring availability sets, Task 8: Configure Availability Sets
- dbserver
service, Role and Service Placement for Improved Availability
- eligible services, Assigning Node Roles For Improved Availability
- Heartbeat, Choosing an Availability Tool
- installing Serviceguard
RPM, Enable HP XC To Run Serviceguard
- LVS
director service, Role and Service Placement for Improved Availability
- Nagios master service, Role and Service Placement for Improved Availability
- NAT service, Role and Service Placement for Improved Availability
- of /hptc_cluster file system, Assigning Node Roles For Improved Availability
- overview, What Is Improved Availability?
- role assignment, Assigning Node Roles For Improved Availability
- Serviceguard, Choosing an Availability Tool
- translator scripts, Writing Translator and Other Supporting Scripts
- worksheet, Using the Improved Availability Planning Worksheet
- InfiniBand interconnect
- configuring switch
controller card, Configure InfiniBand Switch Controller Cards
- connecting to the switch monitoring line card, Configure Voltaire InfiniBand Switches
- logging in to line monitoring card, Configure Voltaire InfiniBand Switches
- node-list file, Task 13: Perform Postconfiguration Tasks for the InfiniBand Interconnect
- subnet manager, General Considerations
- InfiniBand switch, General Considerations
- install.config file, LSF and SLURM Environment Variables
- installation, Upgrading Your HP XC System To This Release
- (see also upgrade)
- adding RPMs from HP XC DVD, Task 3: Install Additional RPMs from the HP XC DVD
- additional software, Install Additional Software From HP or Third-Party Vendors
- boot command, Installation Procedure For A Non-Blade Server Head Node
- head node, Kickstart Installation Process
- information required for, Task 1: Gather Information Required for the Installation
- installing other HP products, Install Additional Software From HP or Third-Party Vendors
- installing third-party software
products, Install Additional Software From HP or Third-Party Vendors
- Kickstart installation file, Kickstart Installation File
- Linux RPMs, Install Optional Linux RPMs
- Maui
Scheduler, Installing the Maui Scheduler
- overview, Software Installation Overview, Kickstart Installation Process
- PBS Professional, Installing and Using PBS Professional
- preparing for, Preparing for a New Installation
- reinstalling
an HP XC system, Reinstalling HP XC System Software Version 3.2.1
- software stack, HP XC Software Stack
- third-party software, Install Third-Party Software Products
- updated RPMs, Task 4: Install Patches or RPM Updates
- verifying, Verifying the System and Creating a Baseline Record of the Configuration, Task 3: Run the OVP to Verify Software and Hardware Components
- installation checklist, Installation and Configuration Checklist
- installation disk, Information Required for the Kickstart Installation Session
- installation log files, Kickstart Installation Process
- installation planning, Task 2: Plan for Future HP XC Releases
- installation procedure, Task 2: Start the Installation Process
- installation type, How to Use This Document
- Intel compiler, Task 8: Purchase Additional Software from HP and Third-Party Vendors, Install Compilers
- interconnect
- configure switch monitoring cards, Configure Interconnect Switch Monitoring Line Cards (Required), Configuring Interconnect Switch Monitoring Cards
- diagnostic tests, Task 3: Run the OVP to Verify Software and Hardware Components
- Myrinet
switch controller card, Configure Myrinet Switch Monitoring Line Cards
- nfiniBand switch controller card, Configure InfiniBand Switch Controller Cards
- on administration
network, discover Command Options
- Quadrics switch controller card, Configure Quadrics Switch Controller Cards
- internal node naming
scheme, Internal Node Naming
- IP address
- for Ethernet connection on
head node, Information Required by the cluster_prep Command
- in
DNS configuration, Task 6: Arrange for IP Address Assignments and Host Names
- ProCurve
switch, ProCurve Switches Can Take Time to Get IP Addresses
- IP address base
- base_addr.ini file, Task 2: Change the Default IP Address Base (Optional)
- base_addrV2.ini file, Task 2: Change the Default IP Address Base (Optional)
- changing, Task 2: Change the Default IP Address Base (Optional)
- IPMI password
- HP Integrity systems, Set the BMC Password on HP Integrity Systems (Required)
- IPv6 address
- configuring on head node, Information Required by the cluster_prep Command
- ITRC, Task 4: Install Patches or RPM Updates
L- license
- HP XC system software, Task 7: Have the License Key File Ready
- location of license key file, Put the License Key File in the Correct Location (Required)
- management, Task 7: Have the License Key File Ready
- troubleshooting, Troubleshooting LSF and Licensing
- XC.lic file, Task 7: Have the License Key File Ready, Put the License Key File in the Correct Location (Required)
- LIM daemon
- starting, Perform LSF Postconfiguration Tasks
- LINPACK, Task 3: Run the OVP to Verify Software and Hardware Components
- Linux
- defined, HP XC Software Stack
- installing
RPMs, Install Optional Linux RPMs
- Linux virtual server (see LVS)
- load of netboot failed, Client Node or Nodes Do Not Network Boot
- lock LUN
- configuring, Configuring a Lock LUN
- lock LUN device file
- creating, Task 14: Create a Lock LUN Device File
- log file
- configuration, System Configuration and Imaging Log Files
- imaging, System Configuration and Imaging Log Files
- installation, Kickstart Installation Process
- OVP, Task 3: Run the OVP to Verify Software and Hardware Components
- software upgrade, Troubleshooting the Software Upgrade Procedure
- system
configuration, Troubleshooting the Cluster Configuration Process
- upgrade.log, Task 4: Upgrade Linux and HP XC RPMs
- login role, Login Role
- Low
RealMemory error, Troubleshooting SLURM
- lsadmin limrestart, lsadmin limrestart Command Fails
- LSF, HP XC Software Stack
- (see also standard
LSF)
- accessible
from outside the system, General Considerations
- configuration files, LSF and SLURM Environment Variables
- configuring
failover, Assigning Node Roles For Improved Availability, Perform LSF Postconfiguration Tasks
- default installation values, LSF and SLURM Environment Variables
- documentation, Related Information
- does not start, Troubleshooting LSF and Licensing
- environment variables, LSF and SLURM Environment Variables
- features, Task 10: Respond to Configuration Questions
- installing, Task 10: Respond to Configuration Questions
- license troubleshooting, Troubleshooting LSF and Licensing
- LIM daemon, Perform LSF Postconfiguration Tasks
- lsadmin limrestart restart failure, lsadmin limrestart Command Fails
- lsadmin restart failure, lsadmin limrestart Command Fails
- lsf.conf
file, LSF and SLURM Environment Variables
- lsfadmin user account, Create Local User Accounts
- postconfiguration
tasks, Perform LSF Postconfiguration Tasks
- profile.lsf file, Perform LSF Postconfiguration Tasks
- restarting
LIM daemon, Troubleshooting the OVP
- sendmail, Configure sendmail (Required)
- testing, Task 3: Run the OVP to Verify Software and Hardware Components
- troubleshooting, Troubleshooting the OVP
- user
account, Create Local User Accounts
- verifying
configuration, Task 1: Verify the LSF Configuration
- LSF configuration, Information Required by the cluster_config Utility
- LSF-HPC with SLURM, Troubleshooting LSF and Licensing
- (see also LSF)
- defined, HP XC Software Stack
- verifying operation, Verify LSF-HPC with SLURM
- lsf.conf file, LSF and SLURM Environment Variables
- lsfadmin
user account, Create Local User Accounts
- LVS
- defined, HP XC Software Stack
- login role, Information Required by the cluster_config Utility
- real server, Information Required by the cluster_config Utility
- LVS alias, Information Required by the cluster_config Utility
- configuring, Task 10: Respond to Configuration Questions
M- MAC address
- Onboard Administrator, Discovering Hardware Configurations With Server Blades And A Single Enclosure
- MAC
address of root administration switch, Information Required by the discover Command
- managedb command, Task 6: Create a Baseline Copy of the Database
- management_hub role, Management Hub Role
- management_server role, Management Server Role
- manpages, Manpages
- Maui Scheduler, Installing the Maui Scheduler
- defined, Maui Scheduler Overview
- documentation, Preparing for the Installation
- installation procedure, Installing the Maui Scheduler
- readiness criteria, Readiness Criteria
- maximum
number of nodes, Information Required by the cluster_prep Command
- MCS
- configuration
file, Create the HP Modular Cooling System Configuration File
- configuring
snmptrapd service, Information Required by the cluster_config Utility, Task 10: Respond to Configuration Questions
- enabling SNMP trap monitoring, Task 17: Configure SNMP Trap Destination for Modular Cooling System Devices
- mcs.ini file, Create the HP Modular Cooling System Configuration File
- mdadm utility, Related Information
- memory usage
- testing, Task 3: Run the OVP to Verify Software and Hardware Components
- mirroring, Enable Software RAID-0 or RAID-1 on Client Nodes
- Modular
Cooling System (see MCS)
- modulefile
- compilers, Install Compilers
- mount failure
- /hptc_cluster, /hptc_cluster File System Does Not Mount
- multicast imaging, Task 12: Run the startsys Utility to Start the System and Propagate the Golden Image
- Myrinet interconnect
- connecting to the monitoring line card, Configure Myrinet Switch Monitoring Line Cards
- switch monitoring line card, Configure Myrinet Switch Monitoring Line Cards
- MySQL
- defined, HP XC Software Stack
- password, Task 3: Run the cluster_prep Command to Prepare the System
- MySQL database (see CMDB)
N- Nagios
- configuration
details, Information Required by the cluster_config Utility
- customizing, Customize the Nagios Environment (Required)
- defined, HP XC Software Stack
- enabling web access, Task 10: Respond to Configuration Questions
- improved availability, Role and Service Placement for Improved Availability
- service
assignment, Management Server Role
- user account, Create Local User Accounts
- verifying system health, Nagios Web Interface
- warnings from OVP, OVP Reports Benign Nagios Warnings
- naming conventions, Naming Conventions Used in This Document
- NAT configuration, Information Required by the cluster_config Utility
- NAT service, External Role
- configuring, Task 10: Respond to Configuration Questions
- netboot failure, Client Node or Nodes Do Not Network Boot
- network connectivity
- testing, Verifying the System and Creating a Baseline Record of the Configuration, Task 3: Run the OVP to Verify Software and Hardware Components
- network mask, Information Required by the cluster_prep Command
- network type, Information Required by the cluster_config Utility, Determining the Network Type
- configuring, Task 10: Respond to Configuration Questions
- NFS daemon, Information Required by the cluster_config Utility
- configuring, Task 10: Respond to Configuration Questions
- NFS server service, Disk_io Role
- NIS configuration, Information Required by the cluster_config Utility
- NIS slave
server
- configuring, Task 10: Respond to Configuration Questions
- no node found, Not All Nodes Are Discovered
- no switch found, Discovering Non-Blade Hardware Configurations
- node
- discovering, Discover All Nodes and Enclosures
- imaging
problems, System Configuration and Imaging Log Files
- in down state, Troubleshooting SLURM
- not discovered, Not All Nodes Are Discovered
- roles, Role Definitions
- node
configuration
- listing, Displaying Node Configuration Information
- modifying, Overview of the cluster_config Command-Line Menu, Modifying a Node
- modifying roles, Modifying Node Role Assignments
- node list
- condensed, Service Configuration Command Descriptions
- explicit, Service Configuration Command Descriptions
- node management role, Node Management Role
- node naming prefix, Information Required by the cluster_prep Command, Task 3: Run the cluster_prep Command to Prepare the System
- node naming scheme, Internal Node Naming
- node numbering, Information Required by the cluster_prep Command
- node role (see roles)
- node role assignment
- default, Special Considerations for Modifying Node Role Assignments
- modifying, Modifying Node Role Assignments
- node-level switch, Information Required by the cluster_config Utility
- configuring, Task 10: Respond to Configuration Questions
- node-list file
- for InfiniBand interconnect, Task 13: Perform Postconfiguration Tasks for the InfiniBand Interconnect
- nrg command, The nrg Command
- NTP configuration, Information Required by the cluster_config Utility
- NTP server
- configuring, Task 10: Respond to Configuration Questions
O- - -oldmp option, Information Required by the discover Command
- onboard administrator
- connecting to, Connect to the Onboard Administrator
- putting on an active network, Connect to the Onboard Administrator
- static IP address for, Connect to the Onboard Administrator
- operation verification program (see OVP)
- OVP, Task 3: Run the OVP to Verify Software and Hardware Components
- failed link error, OVP qsnet_database Test May Fail Due to Benign Errors Returned By the qsctrl Utility
- invoking, Task 3: Run the OVP to Verify Software and Hardware Components
- log file, Task 3: Run the OVP to Verify Software and Hardware Components
- Nagios
warnings, OVP Reports Benign Nagios Warnings
- network_bidirectional test error, OVP network_bidirectional Test Might Report False Error on HP Server Blades
- qsnet_database
test failure, OVP qsnet_database Test May Fail Due to Benign Errors Returned By the qsctrl Utility
- sample
command output, OVP Command Output
- troubleshooting, Troubleshooting the OVP
P- PALLAS, Task 3: Run the OVP to Verify Software and Hardware Components
- parallel
distributed shell (see pdsh)
- password
- BMC/IPMI on HP Integrity systems, Set the BMC Password on HP Integrity Systems (Required)
- configuration and management database, Task 3: Run the cluster_prep Command to Prepare the System
- console port devices, Information Required by the discover Command
- database administrator, Task 3: Run the cluster_prep Command to Prepare the System
- guidelines, Password Guidelines
- root, Information Required for the Kickstart Installation Session
- patches, Task 4: Install Patches or RPM Updates
- PBS Professional
- adding nodes, Add Nodes to the PBS Professional Configuration
- configuration tasks, Configure PBS Professional under HP XC
- execution nodes, Replicate Execution Nodes
- HP MPI tasks, Run HP MPI Tasks
- installation planning, Plan the Installation
- installation process, Perform Installation Actions Specific to HP XC
- overview, PBS Professional Overview
- service daemons, Start the Service Daemons
- user setup, Set Up PBS Professional at the User Level
- pdsh
- defined, HP XC Software Stack
- performance
- maximizing on compute notes, Example 4: Customizing Partition Sizes to Maximize File System Performance
- Permission
denied error
- during NFS mount operation, /hptc_cluster File System Does Not Mount
- PGI compiler, Task 8: Purchase Additional Software from HP and Third-Party Vendors, Install Compilers
- planning
- for future HP XC releases, Task 2: Plan for Future HP XC Releases
- service availability strategy, Task 9: Plan a Service Availability Strategy
- power on nodes, Task 12: Run the startsys Utility to Start the System and Propagate the Golden Image
- preupgradesys script, Task 3: Install the Upgrade RPM and Prepare the System
- processor architecture, Task 1: Gather Information Required for the Installation
- ProCurve switch, ProCurve Switches Can Take Time to Get IP Addresses
- does not obtain IP address, ProCurve Switches Do Not Obtain Their IP Addresses
- ProCurve switch password, Information Required by the discover Command
- program development tools, Install Third-Party Software Products
- propagate golden image, Task 12: Run the startsys Utility to Start the System and Propagate the Golden Image
Q- qsctrl utility, OVP qsnet_database Test May Fail Due to Benign Errors Returned By the qsctrl Utility
- QsNet
- network type, Information Required by the cluster_config Utility
- node- and top-level switches, Task 10: Respond to Configuration Questions
- Quadrics interconnect, Information Required by the cluster_config Utility
- (see also QsNet)
- connecting to the switch monitoring line card, Configure Quadrics Switch Controller Cards
- logging in to line
monitoring card, Configure Quadrics Switch Controller Cards
- network type, Determining the Network Type
- switch controller
card, Configure Quadrics Switch Controller Cards
- QuickSpecs, Install Third-Party Software Products
- quorum
- configuring a lock LUN, Configuring a Lock LUN
- configuring a quorum server, Configuring a Quorum Server
- quorum server
- configuring, Configuring a Quorum Server
R- real
enclosure
- defined, Internal Node Naming
- real server
- defined, Information Required by the cluster_config Utility
- reinstall software, Reinstalling HP XC System Software Version 3.2.1
- release version, Supported Upgrade Paths
- remote graphics
software
- RGS, HP Remote Graphics Software
- Virtual GL, Install Third-Party Software Products
- reporting documentation errors
- feedback e-mail address for, HP Encourages Your Comments
- resource management role, Resource Management Role
- RGS
- defined, HP Remote Graphics Software
- RGS receiver, Information Required by the cluster_config Utility
- RGS sender, Information Required by the cluster_config Utility
- using from
head node, HP Remote Graphics Software
- roles
- analyzing
assignments, Analyzing Current Role Assignments Against HP Recommendations
- avail_node_management, Avail_node_management Role
- availability, Availability Role
- cisco_hsm, Cisco_hsm Role
- common, Common Role
- compute, Compute Role
- console_network, Console_network Role
- default
role assignments, Default Node Role Assignments
- defined, Role Definitions
- disk_io, Disk_io Role
- external, External Role
- for improved availability, Assigning Node Roles For Improved Availability
- login, Login Role
- management_hub, Management Hub Role
- management_server, Management Server Role
- modifying, Modifying Node Role Assignments
- node management, Node Management Role
- resource management, Resource Management Role
- voltaire_hsm, Voltaire_hsm Role
- root file
system, Default File System Layout and Disk Partition Sizes
- root password
- setting, Information Required for the Kickstart Installation Session
- RPM updates, Task 4: Install Patches or RPM Updates
S- SAN storage
- disk_io role, Disk_io Role
- scalable
visual array (see SVA)
- security patches, Task 4: Install Patches or RPM Updates
- sendmail setup, Configure sendmail (Required)
- server blade
- IP address
base, Task 2: Change the Default IP Address Base (Optional)
- service availability, What Is Improved Availability?
- Serviceguard, What Is Improved Availability?, Choosing an Availability Tool
- achieving quorum, Deciding on the Method to Achieve Quorum for HP Serviceguard Clusters
- cmviewcl command, Task 2: Verify Availability Tools
- defined, HP Serviceguard
- installing RPM for HP XC, Enable HP XC To Run Serviceguard
- RPMs, HP Serviceguard
- supported version, HP Serviceguard
- verifying operation, Task 2: Verify Availability Tools
- services
- defined, Special Considerations for Modifying Node Role Assignments
- eligible for improved
availability, Assigning Node Roles For Improved Availability
- services configuration, Customize Service and Client Configurations
- SFS
- defined, HP StorageWorks Scalable File Share
- documentation, HP StorageWorks Scalable File Share
- installing, HP StorageWorks Scalable File Share
- mounting
/hptc_cluster file system, Create the /hptc_cluster File System
- SFS client installation, HP StorageWorks Scalable File Share
- SFS server
- backing up, Task 3: Prepare Existing HP XC Systems
- si_rmimage command, Task 10: Respond to Configuration Questions
- SIOCSIFFLAGS error
- , External Ethernet Connection Fails To Come Up
- SLURM
- assigning
features, Assigning Features
- configuration file, Perform SLURM Postconfiguration Tasks
- configuring, Task 10: Respond to Configuration Questions
- configuring failover, Assigning Node Roles For Improved Availability
- creating
additional partitions, Creating Additional SLURM Partitions
- customizing, Customizing the SLURM Configuration
- customizing
the slurm.conf file, Customizing the SLURM Configuration
- defined, HP XC Software Stack
- environment variables, LSF and SLURM Environment Variables
- Low RealMemory error, Troubleshooting SLURM
- nodes in down state, Troubleshooting SLURM
- postconfiguration utility, Perform SLURM Postconfiguration Tasks
- slurm.conf file, Perform SLURM Postconfiguration Tasks, LSF and SLURM Environment Variables
- slurm_reconfigure
error, SLURM Reconfiguration Errors
- spconfig utility, Perform SLURM Postconfiguration Tasks
- SVA customizations, Required Customizations for SVA
- testing, Task 3: Run the OVP to Verify Software and Hardware Components
- SLURM configuration, Information Required by the cluster_config Utility
- SNMP trap monitoring, Task 16: Configure SNMP Trap Destination for Enclosures
- on enclosures, Task 16: Configure SNMP Trap Destination for Enclosures
- on MCS devices, Task 17: Configure SNMP Trap Destination for Modular Cooling System Devices
- snmptrapd service, Information Required by the cluster_config Utility, Task 10: Respond to Configuration Questions
- software
- HP
XC installation process, Kickstart Installation Process
- installing from a third-party, Install Additional Software From HP or Third-Party Vendors
- installing
other HP products, Install Additional Software From HP or Third-Party Vendors
- patch download site, Task 4: Install Patches or RPM Updates
- reinstalling HP XC system software, Reinstalling HP XC System Software Version 3.2.1
- software development tools, Install Third-Party Software Products
- software installation (see installation)
- software patches, Task 4: Install Patches or RPM Updates
- software
RAID, Enable Software RAID-0 or RAID-1 on Client Nodes
- documentation, Related Information
- enabling on client nodes, Enable Software RAID-0 or RAID-1 on Client Nodes
- mdadm utility, Related Information
- mirroring, Enable Software RAID-0 or RAID-1 on Client Nodes
- striping, Enable Software RAID-0 or RAID-1 on Client Nodes
- software stack, HP XC Software Stack
- software upgrade (see upgrade)
- software
version, Supported Upgrade Paths
- sparse node numbering, Internal Node Naming
- spconfig utility, Perform SLURM Postconfiguration Tasks
- ssh
- configuring on InfiniBand switch, Task 13: Perform Postconfiguration Tasks for the InfiniBand Interconnect
- ssh key, Information Required by the cluster_config Utility
- standard LSF
- configuring failover, Assigning Node Roles For Improved Availability
- defined, HP XC Software Stack
- features, Task 10: Respond to Configuration Questions
- installing, Task 10: Respond to Configuration Questions
- verify configuration, Verify Standard LSF
- startsys command, Task 12: Run the startsys Utility to Start the System and Propagate the Golden Image
- STREAMS, Task 3: Run the OVP to Verify Software and Hardware Components
- striping, Enable Software RAID-0 or RAID-1 on Client Nodes
- subnet manager for InfiniBand interconnect, General Considerations
- supermon
- defined, HP XC Software Stack
- supermon aggregator, Management Hub Role
- SVA
- attached KVM, Information Required by the cluster_config Utility
- defined, HP XC Software Stack, Run the SVA Installation Script to Install SVA
- display nodes, Information Required by the cluster_config Utility
- installing , Run the SVA Installation Script to Install SVA
- installing remote graphics software, HP Remote Graphics Software
- site
configuration file, Task 19: Generate an SVA Site Configuration File
- SLURM customizations, Required Customizations for SVA
- sva.conf file, Task 19: Generate an SVA Site Configuration File
- sva_ovp
utility, Task 4: Run the SVA OVP Utility
- verifying the installation, Task 4: Run the SVA OVP Utility
- sva_ovp utility, Task 4: Run the SVA OVP Utility
- switch controller
card
- logging into Quadrics, Configure Quadrics Switch Controller Cards
- Myrinet interconnect, Configure Myrinet Switch Monitoring Line Cards
- Quadrics interconnect, Configure Quadrics Switch Controller Cards
- sys_check utility, Task 7: Create a Baseline Report of the System Configuration
- syslog-ng
- defined, HP XC Software Stack
- syslogng service, Management Hub Role
- system configuration, Configuring and Imaging the System, Task 7: Run the cluster_config Utility to Configure the System
- defined, System Configuration Process
- information required for, Task 1: Prepare for the System Configuration
- prompts by cluster_config utility, Task 10: Respond to Configuration Questions
- setting up system environment, Task 6: Set Up the System Environment
- system defaults (see default)
- system imaging, Configuring and Imaging the System, System Imaging Process, Task 5: Run the discover Command to Discover Hardware Components
- monitoring, How To Monitor An Imaging Session
- troubleshooting, Troubleshooting the Imaging Process
- system imaging log file, System Configuration and Imaging Log Files
- system interconnect (see interconnect)
- system monitoring
- Nagios, Nagios Web Interface
- nrg command, The nrg Command
- system verification, Verifying the System and Creating a Baseline Record of the Configuration, Task 3: Run the OVP to Verify Software and Hardware Components
U- udp-sender daemon, Task 12: Run the startsys Utility to Start the System and Propagate the Golden Image
- udpcast, Task 12: Run the startsys Utility to Start the System and Propagate the Golden Image
- UID, Override Default User and Group Account IDs
- upgrade, Upgrading Your HP XC System To This Release
- cannot back up database, The upgradesys Utility Might Fail While Backing Up the Database
- cluster_config options, Task 8: Configure the System and Propagate the Golden Image
- external Ethernet connection fails to come up, External Ethernet Connection Fails To Come Up
- InfiniBand
software stack, Is Upgrading Appropriate for Your System Configuration?
- log files, Task 4: Upgrade Linux and HP XC RPMs, Troubleshooting the Software Upgrade Procedure
- merge file customizations, Task 7: Manually Merge File Customizations
- OFED software stack, Is Upgrading Appropriate for Your System Configuration?
- preupgradesys script, Task 3: Install the Upgrade RPM and Prepare the System
- readiness criteria, Task 1: Prepare for the Upgrade
- supported upgrade paths, Supported Upgrade Paths
- troubleshooting, Troubleshooting the Software Upgrade Procedure
- upgraderpms command, Task 4: Upgrade Linux and HP XC RPMs
- upgradesys command, Task 8: Configure the System and Propagate the Golden Image
- upgradesys.log file, Task 8: Configure the System and Propagate the Golden Image
- verifying with the OVP, Task 11: Verify the Upgrade
- viewing results, Task 4: Upgrade Linux and HP XC RPMs
- YUM, Software Upgrade Overview
- upgrade commands, Upgrade Commands
- upgrade path, Supported Upgrade Paths
- upgrade procedure, Task 1: Prepare for the Upgrade
- upgrade
script, Task 3: Install the Upgrade RPM and Prepare the System
- upgraderpms
command, Task 4: Upgrade Linux and HP XC RPMs
- sample command output, upgraderpms Command Output
- upgradesys
command, Task 8: Configure the System and Propagate the Golden Image
- failure, The upgradesys Utility Might Fail While Backing Up the Database
- upgradesys.log file, Task 8: Configure the System and Propagate the Golden Image
- user account
ID, Override Default User and Group Account IDs
- user accounts
- creating locally, Create Local User Accounts
- user name for console port devices, Information Required by the discover Command
|
Printable version
