Several HP XC software
components require licensing, and depending upon the system configuration,
one or more HP XC license key files were sent to you in e-mail
messages. If you have not received the license key information, contact
your HP representative.
If you have an older version of the HP XC System Software installed,
you do not need a new license file for this release if you did not
add nodes to the hardware configuration.
Follow this procedure to save the license information
into one file:
On another machine, save the
contents of the e-mail messages into one file named XC.lic.
Remove all ^M characters (Ctrl-m) from the XC.lic file if the information
was sent to you through DOS.
Save the changes to the file
and exit the text editor.
Record the location of the
file, because you need to know where it is later during the system
configuration process.
During the system
configuration process, you will copy this file to the appropriate
directory on the HP XC system, as described in “Put the License Key File in the Correct Location (Required)”.
The sample XC.lic shown in Example 1-1 is included in this
document for illustrative purposes only; it is not intended for use
and is not valid for the system.
Example 1-1 Sample XC.lic File
Hewlett Packard Company -- This message in its entirety may be placed into
your license file. Use an ASCII Text Editor to avoid introducing characters
which will invalidate the license file. If you have any problems installing
this license key, contact the parties listed on the associated license
documentation or web site.
SERVER this_host ANY
VENDOR Compaq
USE_SERVER
INCREMENT XC Compaq 3.1 28-feb-2007 1 23BBAFCE6662c \
NOTICE="Authorization = BM05WHITMORE19772031 - permanent - HP \
XC System Software - BASE License"
INCREMENT XC-PROCESSORS Compaq 3.0 permanent 68 7BA7E0876F0F \
NOTICE="Date 30-Jan-2007 01:29:36 - License Number = \
LAGA4D1958DL - Qty 68 - 434066-B21 - HP XC System Software 1 \
Proc Flex License"
INCREMENT lsf_xc Compaq 6.1 permanent uncounted 8BC06464E38E \
HOSTID=ANY NOTICE="Date 30-Jan-2007 01:29:36 - License Number \
= LAGA4D1958DL - Qty 1 - p/n 5991-4844 - HP XC System Software \
- LSF License"+
|
Your site might have specific licensing requirements
that require you to modify the license key file. For example, your
site might be using an external license server. In that case, you
need to modify the USE_SERVER attribute.
HP XC license management is provided by the industry-standard
FLEXlm license management utility provided by Macrovision. See the
FLEXlm documentation for information about how to modify a license
key file. Use the search feature on the following website to search
for the FLEXlm End User's Guide:
http://www.macrovision.com
Printable version
