 |
» |
|
|
|
The notes in this section apply to the HP XC manpages. New device_config.8 | |
A manpage is available for the device_config command. The device_config command enables you
to modify the device configuration information in the HP XC command
and management database (CMDB). Uses for this command include configuring
a range of default external network interface cards (NICs) across
multiple nodes and configuring one or two additional, external NICs
on the same node. Changes to ovp.8 | |
Note the following two changes to the ovp(8) manpage: Under -o options , --opts_for_test[=]options, add the following before --user=username: --queue LSF_queue
Specifies the LSF queue for the performance health tests. |
Change the following portion
of the -v component, --verify[=]component as follows: OLD: For all users:
This option takes the form --verify=perf_health/test
cpu Tests CPU core performance using the Linpack benchmark |
NEW: For all users:
This option takes the form --verify=perf_health/test
NOTE: Except for the network_stress and network_bidirectional
tests, these tests only apply to systems that install
LSF-HPC incorporated with SLURM. The network_stress and
network_bidirectional tests also function under Standard
LSF.
cpu Tests CPU core performance using the Linpack benchmark. |
New preupgradesys-lxc.8 | |
The preupgradesys-lxc(8) manpage was not included in
the HP XC Version 3.2 distribution. preupgradesys-lxc(8)
NAME
preupgradesys-lxc - Prepares a system for an XC software upgrade
SYNOPSIS
Path: /opt/hptc/lxc-upgrade/sbin/preupgradesys-lxc
DESCRIPTION
Running the preupgradesys-lxc command is one of several commands that are
part of the process to upgrade HP XC System Software on Red Hat Enterprise
Linux to the next release of HP XC System Software on Red Hat Enterprise Linux
The software upgrade process is documented in the HP XC System Software
Installation Guide. This command is never run for any reason other than during a
software upgrade.
The preupgradesys-lxc command prepares your system for a XC software upgrade
by modifying release-specific files, recreating links where required,
and making backup copies of important files. It also removes specific XC
RPMs that do not upgrade properly. Running preupgradesys-lxc is a
required task before beginning a software upgrade.
The preupgradesys-lxc command does not prepare your system for upgrading Red Hat
Enterprise Linux RPMs.
OPTIONS
The preupgradesys-lxc command does not have any options.
FILES
/var/log/preupgradesys-lxc/preupgradesys-lxc.log
Contains command output and results
SEE ALSO
upgradesys-lxc(8)
HP XC System Software Installation Guide New upgradesys-lxc.8 | |
The upgradesys-lxc(8) manpage was not included in
the HP XC Version 3.2 distribution. upgradesys-lxc(8)
NAME
upgradesys-lxc - For XC software upgrades, this command upgrades and migrates
configuration data to the new release format
SYNOPSIS
Path: /opt/hptc/lxc-upgrade/sbin/upgradesys-lxc
DESCRIPTION
Running the upgradesys-lxc command is one of several commands that are
part of the process to upgrade HP XC System Software on Red Hat Enterprise
Linux to the next release of HP XC System Software on Red Hat Enterprise Linux
The software upgrade process is documented in the HP XC System Software
Installation Guide. This command is never run for any reason other than
during a software upgrade.
The upgradesys-lxc utility is run immediately after the head node is
upgraded with the new XC release software and any other required
third-party software products. The upgradesys-lxc utility performs the
following tasks to upgrade your system:
o Makes a backup copy of the database from the previous
release.
o Modifies attributes in the database to signify that the sys-
tem has been upgraded.
o Removes RPMs from the previous release that are no longer
supported in the new release.
o Executes internal migration scripts to migrate system con-
figuration data to the new release format.
OPTIONS
The upgradesys-lxc command does not have any options.
FILES
/opt/hptc/lxc-upgrade/etc/gupdate.d
Location of migration scripts
/opt/hptc/etc/sysconfig/upgrade/upgradesys.dbbackup-date_time_stamp
Location of database backup
/var/log/upgradesys-lxc/upgradesys-lxc.log
Contains the results of the RPM upgrade process and lists
customized configuration files
SEE ALSO
preupgradesys-lxc(8)
HP XC System Software Installation Guide |
Printable version
