After installing the adapter and attaching peripheral devices,
verify that all components are working. Refer to your system documentation
for information on verifying operation.
HP 9000
To verify that the
adapter is correctly installed, execute the following command:
ioscan -f
The ioscan output could look like this:
ext_bus 0 0/0/0 c720 CLAIMED INTERFACE Ultra wide SCSI |
The third column represents the hardware path of the slot
the adapter is installed in. For information about the ioscan command, refer to your operating system reference manual
or the ioscan man page.
Verify that the adapter and driver
display.
Verify that the devices you attached
to the adapter display.
HP e3000
Assume an rp7400 (N-Class) system with an I/O card being added
to slot #12, we will expect paths 1/0/0/0 and 1/0/0/1 to be returned
for our card.
From BCH menus:
------------------------------------------------------
-Command Description
------- -----------
ALL Display all system information
...
IO Display I/O interface information
...
--------------------------------------------------
Information Menu: Enter command > io
I/O MODULE INFORMATION
Path Slot IODC
Type (dec) Number HVERSION SVERSION Vers
---- ----- ------ -------- -------- ----
System bus adapter 0 0x8030 0xc10 0x0
Local bus adapter 0/0 Built_In 0x7820 0xa00 0x0
Local bus adapter
...
Local bus adapter 1/0 12 0x7820 0xa00 0x0
...
PCI DEVICE INFORMATION
Path Vendor Device Bus Slot
Description (dec) Id Id # #
----------- ----- ---- ---- --- ---
Ethernet cntlr 0/0/0/0 0x1011 0x19 0 Built_In
SCSI bus cntlr 0/0/1/0 0x1000 0xc 0 Built_In
SCSI bus cntlr 0/0/2/0 0x1000 0xf 0 Built_In
SCSI bus cntlr 0/0/2/1 0x1000 0xf 0 Built_In
Comp. ser cntlr 0/0/4/0 0x103c 0x1048 0 Built_In
Comp. ser cntlr 0/0/5/0 0x103c 0x1048 0 Built_In
SCSI bus cntlr 1/0/0/0 0x1000 0xf 128 12
SCSI bus cntlr 1/0/0/1 0x1000 0xf 128 12
Information Menu: Enter command >main
Main Menu: Enter command or menu > sea 1/0/0/0
Searching for potential boot device(s) - on Path 1/0/0/0This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Path# Device Path (dec) Device Path (mnem) Device Type
----- ----------------- ------------------ -----------
P0 1/0/0/0.6 intscsia.6 Random access media
Main Menu: Enter command or menu >
Printable version
