|
|
United States-English | |
|
|
 |
|
User Guide hp Integrity Superdomehp 9000 Superdome > Chapter 2 Installing the System
Running JET Software |
|
|
The JTAG Utility for Scan Tests (JUST) Exploration Tool, or JET, collects system information for each system on a network and places it in files for use by other scan tools. JET gathers configuration data by executing a series of queries targeted at the MP and the CLU portion of the UGUY board. JET is described in Appendix G “JUST Exploration Tool”.
Whenever JUST has been run, system power must be recycled, because the off-line diagnostic can deallocate the CPUs. Remove 48 Volts via the MP command, pe, then cycle the AC breakers on the rear of the cabinet(s). See Appendix B “Powering On and Off the System” for details on power cycling the system If the complex has any IOX cabinet(s), IDs 8 or 9, it is very important to power cycle these cabinet(s) in the proper sequence. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 Printable version |
|
|
|
|
|
|||||||||||||||
|
|||||||||||||||
