 |
» |
|
|
|
There is an EMI (Electromagnetic Interference)
cover on the front of the cabinet. This cover is secured with one
captive screw in the lower center of the cover. Removing
the Front EMI Cover | |
Open the front cabinet door. Loosen the single slotted T-25 captive screw in the
lower center of the EMI cover. Using the handle on the EMI cover, tilt the cover away
from the chassis at the captive screw edge. Remove the cover from the chassis.
Replacing
the Front EMI Cover | |
Place the EMI cover onto the chassis, leaving
the cover tilted outward from the chassis at the captive side. Rotate the cover into position flush with the chassis
frame. Tighten the single captive screw in the lower center
of the EMI cover. Close the front cabinet door.
|
Printable version
