0x00 | 0x00 | No additional sense information |
0x01 | Filemark detected |
0x02 | End-of-partitions/medium detected |
0x03 | Setmark detected |
0x04 | Beginning of partition/medium detected |
0x05 | End-of-data detected |
0x06 | I/O process terminated |
0x11 | Audio play operation in progress |
0x12 | Audio play operation paused |
0x13 | Audio play operation successfully completed |
0x14 | Audio play operation stopped due to error |
0x15 | No current audio status to return |
0x01 | 0x00 | No index/sector signal |
0x02 | 0x00 | No seek complete |
0x03 | 0x00 | Peripheral device write fault |
0x01 | No write current |
0x02 | Excessive write errors |
0x04 | 0x00 | Logical unit not ready, cause not reportable |
0x01 | Logical unit in process of becoming ready |
0x02 | Logical unit not ready, initializing command
required |
0x03 | Logical unit not ready, manual intervention
required |
0x04 | Logical unit not ready, format in progress |
0x05 | 0x00 | Logical unit does not respond to selection |
0x06 | 0x00 | Reference position found |
0x07 | 0x00 | Multiple peripheral devices selected |
0x08 | 0x00 | Logical unit communication failure |
0x01 | Logical unit communication time-out |
0x02 | Logical unit communication parity error |
0x09 | 0x00 | Track following error |
0x01 | Tracking servo failure |
0x02 | Focus servo failure |
0x03 | Spindle servo failure |
0x0a | 0x00 | Error log overflow |
0x0c | 0x00 | Write error |
0x01 | Write error recovered with auto reallocation |
0x02 | Write error—auto reallocation
failed |
0x10 | 0x00 | ID crc or ecc error |
0x11 | 0x00 | Unrecovered read error |
0x01 | Read retries exhausted |
0x02 | Error too long to correct |
0x03 | Multiple read errors |
0x04 | Unrecovered read error—auto
reallocate failed |
0x05 | l-ec uncorrectable error |
0x06 | circ unrecovered error |
0x07 | Data resynchronization error |
0x08 | Incomplete block read |
0x09 | No gap found |
0x0a | Miscorrected error |
0x0b | Unrecovered read error—recommend reassignment |
0x0c | Unrecovered read error—recommend rewrite
the data |
0x12 | 0x00 | Address mark not found for ID field |
0x13 | 0x00 | Address mark not found for data field |
0x14 | 0x00 | Recorded entity not found |
0x01 | Record not found |
0x02 | Filemark or setmark not found |
0x03 | End-of-data not found |
0x04 | Block sequence error |
0x15 | 0x00 | Random positioning error |
0x01 | Mechanical positioning error |
0x02 | Positioning error detected by read of medium |
0x16 | 0x00 | Data synchronization mark error |
0x17 | 0x00 | Recovered data with no error correction applied |
0x01 | Recovered data with retries |
0x02 | Recovered data with positive head offset |
0x03 | Recovered data with negative head offset |
0x04 | Recovered data with retries and/or circ applied |
0x05 | Recovered data using previous sector
ID |
0x06 | Recovered data without ecc—data auto-reallocated |
0x07 | Recovered data without ecc—recommend reassignment |
0x08 | Recovered data without ecc—recommend rewrite |
0x18 | 0x00 | Recovered data with error correction applied |
0x01 | Recovered data with error correction
and retries applied |
0x02 | Recovered data—data auto-reallocated |
0x03 | Recovered data with circ |
0x04 | Recovered data with lec |
0x05 | Recovered data—recommend reassignment |
0x06 | Recovered data—recommend rewrite |
0x19 | 0x00 | Defect list error |
0x01 | Defect list not available |
0x02 | Defect list error in primary list |
0x03 | Defect list error in grown list |
0x1a | 0x00 | Parameter list length error |
0x1b | 0x00 | Synchronous data transfer error |
0x1c | 0x00 | Defect list not found |
0x01 | Primary defect list not found |
0x02 | Grown defect list not found |
0x1d | 0x00 | Miscompare during verify operation |
0x1e | 0x00 | Recovered ID with ecc |
0x20 | 0x00 | Invalid command operation code |
0x21 | 0x00 | Logical block address out of range |
0x01 | Invalid element address |
0x22 | 0x00 | Illegal function |
0x24 | 0x00 | Invalid field in cdb |
0x25 | 0x00 | Logical unit not supported |
0x26 | 0x00 | Invalid field in parameter list |
0x01 | Parameter not supported |
0x02 | Parameter value invalid |
0x03 | Threshold parameters not supported |
0x27 | 0x00 | Write protected |
0x28 | 0x00 | Not ready to ready transition (medium may
have changed) |
0x01 | Import or export element assessed |
0x29 | 0x00 | Power on, reset, or bus device reset occurred |
0x2a | 0x00 | Parameters changed |
0x01 | Mode parameters changed |
0x02 | Log parameters changed |
0x2b | 0x00 | Copy cannot execute since host cannot disconnect |
0x2c | 0x00 | Command sequence error |
0x01 | Too many windows specified |
0x2f | 0x00 | Commands cleared by another initiator |
0x30 | 0x00 | Incompatible medium installed |
0x01 | Cannot read medium—unknown format |
0x02 | Cannot read medium—incompatible format |
0x03 | Cleaning cartridge installed |
0x31 | 0x00 | Medium format corrupted |
0x32 | 0x00 | No defect spare location available |
0x01 | Defect list update failure |
0x33 | 0x00 | Tape length error |
0x36 | 0x00 | Ribbon, ink, or tower failure |
0x37 | 0x00 | Rounded parameter |
0x39 | 0x00 | Saving parameters not supported |
0x3a | 0x00 | Medium not present |
0x3b | 0x00 | Sequential positioning error |
0x01 | Tape position error at beginning-of-medium |
0x02 | Tape position error at end-of-medium |
0x03 | Tape or electronic vertical forms unit
not ready |
0x04 | Slew failure |
0x05 | Paper jam |
0x06 | Failed to sense top-of-form |
0x07 | Failed to sense bottom-of-form |
0x08 | Reposition error |
0x09 | Read past end of medium |
0x0a | Read past beginning of medium |
0x0b | Position past end of medium |
0x0c | Position past beginning of medium |
0x0d | Medium destination element full |
0x0e | Medium source element empty |
0x3d | 0x00 | Invalid bits in identify message |
0x3e | 0x00 | Logical unit has not self-configured
yet |
0x3f | 0x00 | Target operation conditions have changed |
0x01 | Microcode has been changed |
0x02 | Changed operating definition |
0x03 | Inquiry data has changed |
0x40 | 0x00 | RAM failure |
nn | Diagnostic failure on component nn |
0x41 | 0x00 | Data path failure |
0x42 | 0x00 | Power-on or self-test failure |
0x43 | 0x00 | Message error |
0x44 | 0x00 | Internal target failure |
0x45 | 0x00 | Select or reselect failure |
0x46 | 0x00 | Unsuccessful soft reset |
0x47 | 0x00 | SCSI parity error |
0x48 | 0x00 | Initiator detected error message received |
0x49 | 0x00 | Invalid message error |
0x4a | 0x00 | Command phase error |
0x4b | 0x00 | Data phase error |
0x4c | 0x00 | Logical unit failed self-configuration |
0x4e | 0x00 | Overlapped commands attempted |
0x50 | 0x00 | Write append error |
0x01 | Write append position error |
0x02 | Position error related to timing |
0x51 | 0x00 | Erase failure |
0x52 | 0x00 | Cartridge fault |
0x53 | 0x00 | Media load or eject failed |
0x01 | Unload tape failure |
0x02 | Medium removal prevented |
0x54 | 0x00 | SCSI to host system interface failure |
0x55 | 0x00 | System resource failure |
0x56 | 0x00 | Reserved |
0x57 | 0x00 | Unable to recover table of contents |
0x58 | 0x00 | Generation does not exist |
0x59 | 0x00 | Updated block read |
0x5A | 0x00 | Operator request or state change input (unspecified) |
0x01 | Operator medium removal request |
0x02 | Operator selected write protect |
0x02 | Operator selected write permit |
0x5B | 0x00 | Log exception |
0x01 | Threshold condition met |
0x02 | Log counter at maximum |
0x03 | Log list codes exhausted |
0x5C | 0x00 | RPL status change |
0x01 | Spindles synchronized |
0x02 | Spindles not synchronized |
0x5D | 0x00 | Reserved |
0x5E | 0x00 | Reserved |
0x5F | 0x00 | Reserved |
0x60 | 0x00 | Lamp failure |
0x61 | 0x00 | Video acquisition error |
0x01 | Unable to acquire video |
0x02 | Out of focus |
0x62 | 0x00 | Scan head positioning error |
0x63 | 0x00 | End of user area encountered on this track |
0x64 | 0x00 | Illegal mode for this track |
0x65 | 0x00 | Reserved |
0x66 | 0x00 | Reserved |
0x67 | 0x00 | Reserved |
0x68 | 0x00 | Reserved |
0x69 | 0x00 | Reserved |
0x6A | 0x00 | Reserved |
0x6B | 0x00 | Reserved |
0x6C | 0x00 | Reserved |
0x6D | 0x00 | Reserved |
0x6E | 0x00 | Reserved |
0x6F | 0x00 | Reserved |
Printable version
