Features

Full 64-bit (66 MHz) Direct Memory Access (DMA) bus master.

Zero wait-state bus master data bursts.

PCI Universal 3.3 V/5 V bus support.

Compliance with PCI Local Bus Specification, Revision 2.2.

Two separate SCSI channels.

16-bit (Wide) Single Ended (SE)/Low Voltage Differential (LVD).

Enabling/disabling of on-board termination, with hardware override (using jumpers).

68-pin Very High Density Cable Interconnect (VHDCI) connector for each of the two external channels.

68-pin High Density connector for each of the two internal channels (not supported on HP-UX systems).

Maximum data transfer rate of 160 MBytes/s per channel, with a maximum cable length of 12 meters (with multiple SCSI devices) and a maximum 15 SCSI devices per channel (not including the A6829A adapter).

Fast, Ultra, Ultra2, and Ultra160 data transfer capability.

SCSI termination power (TERMPWR) source with auto-resetting circuit breaker.

Flash EEPROM configured with HP part number (allows easy identification through the ioscan command).

PCI4X adapter (66MHz, 64-bit data transfers).

PCI board dimensions: approximately 8.95 inches x 4.25 inches.

Universal 64-bit PCI card edge connector.

Four SCSI connectors:

ISA/EISA bracket.